Spring is approaching and many families are feeling the fatigue of winter’s hardships. What better time to travel than now? Many families are just trying to get away from the cold. Booking a trip can be exciting, but have you ever arrived at your destination and said “where am I supposed to plug in my hair dryer?” or “how am I going to charge my phone?”

Let’s be honest, the last thing on your mind when packing for any vacation is bringing that adapter along with you. Often times we are such in a hurry to pack we tend to forget that not every country has the same outlets as we do.

Here are some easy steps to help you get organized while traveling and how to take the charge with you wherever you go.

In the US and Canada the average voltage is 120 volt per residential home. However, when traveling abroad the voltage is quite different. For example, Europe’s standard house will use 240 volt, which is substantially more voltage than the average North American home.

Before purchasing a travel charger or a universal adaptor always read the label on the back of the packaging to ensure you are getting the right voltage amounts for the right countries. Doing so will ensure you won’t end up with a damaged device, appliance or blown fuse.

Whether its bringing the spark alive in a relationship, or just traveling with friends and family, remember to bring the charge with you!

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

As safe as we may feel in our own homes, it doesn’t hurt to add an extra layer of safety and security. Security lights can go a long way to making your home a little safer. Well-lit homes are deterrents against crime. Perpetrators are less likely to lurk in landscapes that are bright with no dark corners. Walking through your yard or from your car to the front door can also be dangerous if you can’t see well. An electrician in Glendale, like those at The Electric Connection, can help you make your home a little safer by adding security lighting.

You can opt to have the bright flood light variety or the kind that is a little dimmer, but just as effective. Security lights mounted above your driveway, your front door or your back door are all great places to place the lights. Motion detectors or timers are ideal and ensure you will never have to worry about stepping out of your car or your house into the darkness. An electrician will help you set the timer to meet your needs.

A Glendale electrician will need to wire the lights directly into your home’s main power. This is called hard-wiring and ensures the lights are always on. However, you can choose to have your security lights installed with a switch. This gives you the freedom to turn the light off and on whenever you need it. Part of your upgraded security lighting system can also include landscaping lighting. Lighting up darkened areas under bushes and in dark corners can help you keep other unwanted pests out of your yard. Nocturnal creatures will be less inclined to hide in an area bathed in light. If you would like to brighten up your outdoors, give The Electric Connection a call today.

‘Tis the season to be jolly with thousands of colorful lights glowing from your trees, gutters, front door wreath, and bushes. Billions of lights will be used to dress up homes and businesses throughout the country during the final months of the year. As festive as the light-up Santa and Rudolph may look on top of your roof, you have to make electrical safety the focus of your holiday lighting festivities.

Following are five tips to help you avoid common holiday lighting problems others will experience this year. Commit them to memory so electrical safety does not pull the plug on your merry-making décor this year:

1. If you are putting up a live Christmas tree, make sure it is well-watered and use LED bulbs for all decorations placed on the tree. Dry trees and heat from non-LED bulbs create home fires every holiday season. Do not place candles where they may be knocked over on a live tree. LED bulbs should be used when decorating trees in your outdoor landscape as well.

2. Thoroughly inspect every string of lights and plug-in points before using them indoors or outdoors. If you notice any of the following at even one point on the string, toss it out or repair the damage before use to ensure electrical safety for your home:

3. Power cords should be used to connect strings of lights, but pay attention to how many strings you are connecting per cord. In general, more than three strings of lights could be too much.

4. Avoid hanging your lights with tacks, screws, or nails. You do not want to crack, tear, or otherwise damage the electric cord. You can use insulated hooks instead.

5. Make sure you are plugging outdoor lighting features into ground fault circuit interrupter outlets. These outlets reduce the risk of electrical shorts or dangerous shocks if water, wet leaves, and other outdoor elements get into the sockets.

6. Do not use indoor-only holiday lights outdoors. There are clear differences in how these types of lights are made, even if they look the same. For instance, outdoor lights are created with more insulation so they are not as easily affected by rain and snow.

Do not allow electrical safety to cut the cord on your holiday lighting festivities. Light up the house and allow the big snowman to wave at the neighbors from your front lawn. Just make sure your snow globes, trains, and twinkling tree lights present no danger to your home, your family, and your neighborhood.