If the motor seems to be fine, attempt to reconnect it to a load. For motors spinning in the wrong direction that are three-phase, swap any two leads either in the starter or in the motor connection box to reverse its rotational direction. Motors that struggle with a load may have something plugged up or jammed in the load itself. A mechanic may be required to check fans, belts, or pumps that are powered by a motor. When a motor trips the overload device, attach an anmeter to measure the current during startup and operation. Check the FLA on the motor nameplate to see what the expected current draw should be. If it is high, the motor may simply be overloaded. If not, the overload protection device may be set too low or may need replacing.

By following these basic ac motor troubleshooting tips, any electrician can quickly determine the cause of most problems in an AC motor.

Do you have a specific way you place food in your refrigerator or do you just put food wherever you can find an empty spot? If you use the latter method, you probably see more food spoilage. In fact, you may have to occasionally go hunting through the fridge to find that rotten smell we have all been familiar with.

Decluttering your refrigerator is probably one of the easiest ways to prevent food from spoiling quickly. It’s an easy process once you develop a system for it. The main goal is to keep your food easily accessible and highlight the foods that need to be eaten as soon as possible (like strawberries).

The best way to start this process is to clear out all of the expired food in your refrigerator. This includes bags of leftovers you promised yourself you were going to eat and it also includes all of those jars you’ve had on the side of your door for the past few years.

Once you have only edible food left in your refrigerator, think about how you want to use it:

Dedicate space for frequent meal preparation. If you have a certain breakfast, lunch or dinner meal prep routine, dedicate a shelf or two for just those ingredients so you can easily grab them first thing.

Showcase the foods that will spoil soon. Have foods that are likely going to expire sooner than the rest displayed front and center. This will encourage you to use them in meal preparation. Clear containers also make it easy to see what’s inside.

Control the environment. Check the temperature to make sure foods are properly stored. Putting liners in the bins also helps absorb any moisture that could make your fruits or vegetables too cold.

Develop a rotation system. When you buy new food, make sure you put it behind your older food.  This keeps your food waste low and your budget on track.

Don’t forget the freezer. If it is older than 6 months, it is probably freezer burned by now and can be tossed.  Store your foods in airtight containers or bags and label them (include the date).  No more “mystery meat” for dinner, and no more wasted food.

The freezer is often underutilized. Bread, scrambled egg mix, leftover coffee, tea, and broths can all be frozen for later use. Your homemade soup, cooked rice and other dinner entrees can also be frozen if you don’t have a chance to eat the leftovers in time.

Try using an ice cube try to store single serving pieces of purees, sauces and beverages. Freeze leftover coffee for an iced coffee drink, or a cube of frozen veggie broth to whip up some gravy later in the week. Make smoothies down the road by freezing mashed or chopped fruit. Almost anything can be frozen except for canned foods in the can (although they can usually be removed and frozen) and eggs in the shell.

To keep your refrigerator decluttered, go through it once a week to identify foods that need to be eaten soon and toss what is no longer edible. Once your refrigerator is decluttered, you’ll save money by having less food spoilage and eat better because all of your food is easy to find.

Keep Your Refrigerator Running at its Best Quality

Making sure your refrigerator is well maintained can also prolong the life of the food inside. If your refrigerator isn’t working correctly, food is more likely to spoil. Consider these tips for proper maintenance of your refrigerator:

The relationship between weather and energy usage is a never-ending cycle. Spikes and drops in temperature and humidity lead to spikes and drops in energy use (and costs), which in turn correspond with spikes and drops in greenhouse gas emissions, further affecting climate. What does this relationship mean when it comes to your energy usage?

Temperatures above 100 and below 40 stress your heating and cooling system, pushing it to capacity, reducing efficiency, and draining energy supplies, along with your wallet. Quite simply, this amounts to less bang for your buck in terms of comfort. Add to temperature issues, wind, cloud cover, and precipitation and the snowball effect continues, further impacting comfort levels, not to mention your ability to illuminate interior spaces. Compound the issues – and the population affected – and you’ve got grid strain to boot.

That depends on the source of energy. In the US, 83 percent of energy usage comes from fossil fuels, which release gases such as CO2 into the environment during the creation of energy. Unfortunately, these gases trap heat in the atmosphere. Atmospheric greenhouse gases have increased 30 percent since the pre-Industrial Revolution era alone, and the level continues to rise with energy demand. As levels increase, so does the effect on the environment. Thousands of scientists agree the trapped gases are currently affecting the climate, and will increasingly weigh on it as time goes on. This has resulted in an increase in interest in cleaner forms of energy, including nuclear, solar, wind, and geothermal.

Most people have dealt with a power cut at some time or the other. There could be a very bad storm or lightning could strike and the power could get cut; but it also returns quite quickly. However, you might switch on the computer and notice it has stopped working.

This is caused when lightning hits a power line which results in a sudden surge on the electrical pressure that overloads the electronic circuitry. It’s true that lightning strikes cause power surges; even everyday appliances in our homes can cause power surges every time they are switched.

Over time, these seemingly small surges can cause a lot of damage to your property; and they slowly reduce the lifespan of your refrigerator, computer or air-conditioner or any other appliance that’s plugged into a power outlet or any that’s been hardwired into the electrical system in your home. The one way to protect your property from damage is to learn more about what power surges are.

Across Australia, the basic electrical voltage for residences is 230V + 10% up to – 6%. The load vibrations are taken into account in this particular range, as the appliances quickly cut in & out. In case the voltage increases above the working range of the appliance, it can result in arcing in the appliance.

These arcs generate heat, and these results in damage to the electrical components within the appliance. This type of damage is cumulative and the appliances are still able to function normally, till the point the damage becomes so excessive that your PC or TV just stops working for no apparent reason.

For all plug-and-play appliances like your TV and PC, you can connect them to a point-of-surge protector, and that becomes a very easy solution. This particular system is very much like a standard power board. You simply have to plug in the appliances that have to be protected, into the device. This device doesn’t suppress/arrest the surge; it redirects that surge straight into the ground. If you have to protect only a single appliance and a point-of-use protector doesn’t fit, then it’s possible to get a special outlet with the built-in protection installed.

Even as the point-of-use devices protect various appliances which are typically plugged into any power outlet, you would have to get another device to protect those items which are hardwired into the electrical system of your home, including the lights and air-conditioners. These devices can be easily complemented by an electrical panel surge protector.

If it’s installed inside the mains, it will level out the fluctuations and power spikes; or it might also stop them well before they reach the devices. When a mix of electrical panel surge protection and point of use protection are used, it helps provide your equipment and devices from very powerful voltage spikes.

If you have consistently experienced any power surge issues in the past or if you want to just protect your property against the probability of surges, you only have to call us and speak with our experts. They will provide you with all the information and guidance you need and will ensure that you get the kind of solutions that work perfectly for you.

For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263