Holiday season takes on a life of its’ own and we are in the thick of it.  One more gift to buy, one more light to shine, one more guest to add to the table…   Take precautions to make sure you know just who and what you are inviting into your home.

Illuminate your home to the fullest, but know your lighting facts and be safe.  Check all lighting products for safety and buy all lights and electrical supplies from a reputable dealer.

Look for lighting showrooms that are backed by the American Lighting Association (ALA).  Check for a certified UL-Mark on all lighting products.

Decorative strings of holiday lights, Christmas Lights and novelty lamps from Bulbrite are of the best quality…

Get to know your lamps and lighting for a Safely Illuminated Holiday Season.

1.  The item has been evaluated and tested by certified-UL engineers to meet all UL safety requirements.

2.  The product is ensured against the risk of fire and electric shock as long as all safety instructions are followed according to the package directions and proper usage.

3.  UL’s green holographic label indicates that a product is for indoor-use only.

4.  UL’s red holographic label indicates that the product may be used indoors or outdoors.

5.  UL evaluates decorative lighting strings in accordance with the requirements described in the UL/ANSI 588, the standard for Safety of Seasonal and Holiday Decorative Lighting.

The Wonderland of Christmas pier lamp from Meyda Lighting is UL-approved for both indoor and outdoor usage.

The ANSI designation indicates that the American National Standards Institute approves the UL Standard as the American National Standard.

Elegant crystal table lamps from Schonbek are enchanting.

Accent lamps in crystal from Schonbek bring exquisite colors and sparkling brilliance to the table.

Find the best light fixtures and lamps for your holiday celebration at Capitol Lighting showrooms or visit 1800lighting.com, an ALA member showroom and company.  Lighting showrooms that are affiliates of the American Lighting Association (ALA) will only carry lighting products that have been tested for safety and are certified with the UL-Mark.

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

one of 11 retrofit kits designed to replace existing Metal Halide and High Pressure Sodium lights in their existing fixtures. Multiple mounting options are included so you can use these lights in fixtures such as high bays, flood lights, area lights, shoe boxes, street lights or wall packs, to name a few. Installation is simple and easy and is no more difficult than a bulb and ballast replacement. Patent Pending Heat Sink technology allows this LED retro kit to run significantly cooler than other heat sink designs. Because of this, the head itself is warrantied for 10 years. Utilizing high efficiency Nichia LEDs, these kits produce an incredible amount of light while consuming very little power to do so. Compare these to the competition, you will save a lot of money on your utility bill using our Retrofit kits compared to the competitions.

LED Retrofits can be installed anywhere including