We all know that switching off the lights when not in use is a good thing; but we often leave the lights on even when we leave a room or aren’t using a particular space. This can result in an increase in our utility bills in the long term.

In many urban houses, electricity is wasted more than it is used. There are a number of devices on the market today that save a considerable amount of energy. Installing these controls would help in decreasing your bill in a significant way. Here are some of the devices that help save energy in your home:

These devices are largely used for security lighting installation. They detect movement and will switch on the lights connected to the system. They can be installed on the porch as well as the indoor spaces of your home. Installing different types of security lights in the outdoor and indoor areas of your home can be expensive.

However, installing motion detectors on your lawn or on floodlights directed towards your porch will add to the security of your property and help save electricity as well. The lights won’t consume an excess amount of energy and will be switched on only when any motion is detected. They can be customized to be turned off during the daytime.

LED lights are up to 80% more energy-efficient when compared to traditional lighting. The latter generate heat which results in energy-loss. However, in the case of LED lights, only around 5% of the energy gets converted into heat and more than 95% is converted into light. They are environment-friendly and an 84 watt fluorescent bulb can be replaced with a 34 watt LED and will emit the same amount of light. While the upfront cost of LED bulbs is higher than that of halogen or fluorescent bulbs, they can last for up to 50,000 hours and provide value in the long term.

This is a more technologically sophisticated version of motion detectors. These sensors are specially designed for indoor spaces. They turn on the lights automatically when someone enters the room, and turn them off when they leave. Ultrasonic sensors can pick up sounds and detect if someone is in the room; they trigger the lighting system in the room. But these sensors aren’t of much use in quiet environments. Infrared sensors are useful in these settings as they detect both – body heat as well as movement.

These devices are installed in areas such as basements, where artificial light is needed and there is less of ambient light. These sensors turn off the lights when they detect daylight and automatically turn them on when it gets dark; this saves a lot of energy. Many of these products can be customized to your needs. You can change the level of brightness at which the lights get switched off and on. These technologically advanced devices add to the energy-efficiency of your property.

An electrical emergency can cover a number of different situations. If the emergency is someone suffering from a severe electrical shock, you need to call 9-1-1 immediately for an ambulance. In this post we will deal with other types of electrical emergencies you may encounter in your home, such as sparking and power outages.

One piece of advice should stand atop everything else: call for the assistance of professional electricians when it comes to emergency repairs. You should never tamper with an electrical system on your own in an attempt to fix a problem, no matter how urgent it seems. The danger of electrocution or fire is high, and you cannot take the risk.

Electrical fires are one of the more common ways that house fires start. If exposed wires, an electrical short, or a malfunctioning appliance triggers a fire, do not throw water on the flames. If an appliance is on fire, disconnect it from its power source if possible or shut down the power. Use a fire extinguisher if you have one. (If you don’t currently have an extinguisher in the house, put it on your immediate “to-do” list.) Call 9-1-1 if the fire continues. You will need to call electricians after the immediate danger is over to track down the cause of the fire and discover what repairs and new installations are necessary to prevent it from reoccurring.

A power outage may come from the municipal grid, or it may be the result of issues with the electrical system in your home. If only your home is experiencing a black out, first check the circuit breaker panel to see if any tripped breakers are at fault. Then call for licensed electricians to look into the possible causes.

A power surge from a lightning strike or downed power line can cause damage to appliances, take out the power, or trigger an electrical fire. If this occurs in your home, you should consider contracting professional electricians to install a whole-house surge protector in the electrical panel so you will have few worries in the future.

Always remember, call emergency services first in the case of imminent danger such as fires or electricity. Once the immediate threat has ended, look to licensed electricians for repairs and other services that will prevent further problems and keep your home safe.