One of the most devastating things that can happen to your business is an extended loss of power. Without power, you lose valuable business hours and revenue. Business interruptions of this nature are not necessary though, even if it’s the result of a strong snowstorm.

Being well-equipped with a quality commercial generator is essential to keeping your business running effectively and efficiently during a severe power outage. Understandably, you may have questions before purchasing such a system. We’ve tackled a couple of our most frequently asked below.

Every commercial property is different, and therefore your needs will be different as well. Your generator will be sized on the electrical load that it will be tasked with carrying. The actual square footage of your building does not play a factor in this, as it would for an HVAC system or commercial water heater.

Your new generator must meet your specific requirements so that it’s able to do its job without accumulating undue stress on the unit or damage to the devices connected to it. Accurate sizing involves a number of factors and considerations, which our service professionals are happy to assist you with.

If your commercial generator is well-maintained and used properly, then it will run as long as fuel is being supplied to it. How often it needs to be refueled will depend on what type of tank you have. Some commercial generators are supplied with a 24-hour fuel tank, although 48-72 hour fuel tanks are also available.

Additionally, unless your business or commercial space deals with food that could spoil, it’s recommended that you turn your generator off during non-business hours so that the engine can cool. This is particularly helpful during long power outages as it helps your system avoid unnecessary wear and tear.

Your electrical panel serves as the entry point for the electricity being provided to your home from your electrical utility. It also functions as an electrical safety device that will turn off an electrical circuit if there is too much current. Excess levels of electricity can lead to fire or electrical shock. Although you can often tell which circuit is malfunctioning by looking at your breaker box, it can make things much easier if you take the time to label all of your circuits or fuses. This way, you know which switch goes to which area of your home, regardless of whether or not that particular breaker has visibly tripped.

Most newer homes use circuit breakers in order to protect the different areas of the house. Some older homes, however, may still have fuses. If your home still has a fusebox, consider calling a local Pasadena electrician to inspect your electrical system. This is often the sign of an undersized electrical service. If you have a breaker panel, just follow the below steps to restore power to the area of your home that has been affected.

Excess electrical current passing through a circuit will cause your circuit breaker to trip, effectively stopping the current from flowing anymore. When this happens, the switch will move to a neutral position, which is between the ON and the OFF position. To return power to this circuit, all that you have to do is flip the switch all the way to the OFF position and then back to the ON position. Before doing this, it is good practice to turn off or unplug all appliances in the circuit.

Now that the power is back on, you can continue to use your circuit as usual. If you have continuous issues, however, you should call our technicians at The Electric Connection for assistance. We are always more than happy to lend a helping hand. You can also get more information through our website at www.theelectricconnection.com.

Smoke detectors are very crucial pieces of safety equipment in your home and it is now also mandatory in NSW that residential properties have at least one smoke alarm on every storey. Not many people are aware of this, but a large percentage of fires in homes cause massive destruction because the smoke detectors didn’t function the way they should have.

The unfortunate fact is that we almost always take these fixtures for granted; we get them installed and rarely even notice they are there on the ceiling until they get set off accidently or when their batteries go dead. Improperly installed smoke detectors or even poorly-maintained ones will only end up letting you down exactly when you need them.

It’s important that you make smoke detector maintenance a part and parcel of your regular home maintenance routine. There two main types of smoke alarms used on residential properties:

These have minuscule quantities of radioactive material that reacts to the particles that are emitted when a fire breaks out, and that sets-off the alarm. These alarms are extremely effective in the detection of fast-flaming fires in which there isn’t too much of visible smoke.

These have photocells with a light beam that shines away from the cell. If smoke enters its test chamber, the smoke particles scatter some of the light; this hits the cell and triggers the alarm. These types of smoke detectors are ideal for detecting smouldering/smoky fires, which is how residential fires typically are.

Regardless of the types of alarms installed on your property, it doesn’t take more than a few minutes annually to ensure that these devices are in a working order at all times. The few steps you should take are:

Aside from the regular maintenance, it’s also very important that you consider how many smoke detectors you have and how they are powered. The best way to increase the effectiveness and safety of these devices is to upgrade your home’s smoke detection setup. The things to focus on are:

Frances Ellen Watkins Harper (1825-1911). Her bio is beyond the scope of this entry, but I encourage you to follow the link and check her out. Get a little perspective on life today by reading a paragraph about this amazing human being and poet.

Harper’s poem, “Let the Light Enter,” depicts light in an interesting and fresh way, fresh still, even 100 years after her death. Poetry, generally speaking, is like a vast collection of opportunities to learn about yourself and the world in which you live. I invite you to take a minute to read “Let the Light Enter.”

The Dying Words of Goethe

He just urgently wants to watch the “balmy sunshine/ Play around” his deathbed. He just wants to experience the sensation of light doing it’s thing. “More light!” he demands. It strongly suggests that appreciating and enjoying the beauty of light is what Goethe, a lifelong thinker and poet who lived from 1749 to 1832, finds most worthy of his final precious minutes. That’s a big deal. In choosing between the pleasure of thoughts and the pleasure of the material world, he chooses the latter. It’s like all the things that seem to separate us from the natural world are shown to be false in the final moments. Think of a dog lying on a rock in the sun. Maybe that’s the purest state of being, just lying there, not thinking much, and enjoying the pleasure of the light, the sound of a brook. And maybe that’s why Goethe wants to pass away in such a state.