Using a warm white or RGB COB (chips-on-board) LED, these flood lights emit up to 1,000 lumens of illumination in a wide 120-degree beam pattern. The weatherproof LED fixtures have a low-profile die cast aluminum housing with an integral heat sink and a tempered glass lens. An adjustable mounting bracket is also included to direct illumination where it’s needed.

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

A home battery can solve a lot of problems. With enough storage, you can buy electricity when it's cheapest, then dole it out when you need it. Plus, you'll be protected in case of a blackout. Until very recently, the technology for a practical home battery system wasn’t powerful enough to keep the average home humming. However, several companies are now producing or developing home batteries that can change the way we power our residential electrical work.

High Generating Costs at the Margins

Many areas of the country are shifting toward variable time-of-day pricing models for utilities, in which electricity typically costs more during the day and less at night. Utilities want to incentivize daytime conservation because they need to meet the demand at any given time or risk brownouts. Since demand is much higher during the day, utility companies needs to bring on extra generating equipment, which is expensive. The more they can smooth out demand so they can produce similar amounts of electricity around the clock, the lower the overall costs will be.

That's where batteries come in. There's no way around consuming more power during the day – that's when Americans typically use their electrical work to power air conditioning, televisions, computers and other appliances. However, with enough home storage capacity, you can purchase electricity at night and store it in your home battery until you need it. That way, you pay less, the utility can ameliorate its variable demand problem, and everybody wins.

Competition Hits the Market

Tesla Motors was one of the first companies in the home battery field with its Powerwall, but now other competitors are swiftly preparing to hit the market. Currently, LG Chem and Samsung SDI are working on their own battery models, with LG Chem's product projected to be available in North America before the end of the year.

Globally, the home battery market could grow nearly tenfold, from $388 million today to $3.2 billion by 2020, according to Business Korea. The home battery field is poised to grow hand-in-hand with that of batteries for electric cars, since the technologies have a lot of overlap – in fact, some experts project that electric cars themselves will soon serve a second function as an energy storage unit for your home. They won't be as practical as stand-alone batteries for many families, since the cars are liable to be away from home during the day when the electricity is needed, but they can add capacity in an emergency.

A Helping Hand for Your Storage Capacity

We're just at the start of what promises to be a revolution in home energy storage options. For more information about what home batteries are available in your area, or if you need any other residential electrical work, contact an expert electrician today.