High bay fixtures are a critical part to any high ceiling building. Since these high bays require such large lumen output, the cost to run them can be high. By converting to LED high bays, you are able to reduce your energy consumption in your most energy intensive fixtures by up to 75%.

In this post, we are going to cover (non-comparatively) 5 top types of LED high bay lights for this year, 2017. While not every item on this list will apply to you and your building, there will surely be one or two for your needs if you currently use high bay lights in your facility.

If at any time you come across a question, want more information, or are actually interested in implementing LED into your building;

These traditional commercial high bay lighting fixtures look a lot like what we think a normal high bay should look like. They are reminiscent of traditional style Metal Halide and High Pressure Sodium high bays and offer your typical round high bay look.

These high bay LED fixtures can replace both 400W and 1000W Metal Halide. The smallest unit is 80W producing 10,240 lumens. There is a 160W unit producing 19,200 lumens. This would be a good 400W Metal Halide replacement. And the largest unit at 400W produces 51,200 lumens. That’s 128 lumens/watt. And, USA Made backed with a 10 year warranty.

These LED high bay Lighting fixtures look a lot like a troffer style panel. The advantages of this type of fixture are the LEDs are spread over a larger area. This has 2 main advantages – Great light distribution and large heat sink. It is important to realize these lights are particularly good at light distribution, creating an even distribution.

These high bay LEDs can replace both 400W and 1000W Metal Halide. The smallest unit is 120W producing 15,360 lumens. There is a 150W unit producing 19,200 lumens and the largest unit at 300W produces 38,400 lumens. USA Made backed with a 10 year warranty like the traditional style high bay.

A retrofit kit utilizes your existing fixture and replaces the bulb and ballast with the LED head and the LED driver. These retrofits can be significantly more economical than replacing the entire fixture, for obvious and not-so-obvious reasons. One of which being it’s cheaper to buy. Another being it’s (typically) cheaper to install as well. For this reason, our high bay retrofit kits HAD to make it on the list of the best high bay lighting options.

GFCI stands for ground fault circuit interrupters. This specific type of outlet can help prevent most electrocutions, and are even required in homes near sinks such as those in the kitchen or bathroom. GFCI outlets measure the current flowing out of the outlet and back. If the values vary, even slightly, the outlet with shut down any transfer of electricity. This has saved thousands of lives over the last 40 years. It’s very easy and quick to have an electrician go through your home and replace standard outlets with life-saving GFCI outlets.

If you’ve ever had children, you know how important outlet covers are in the home. While they may not be necessary all the time in a home with only adults, there are many other reasons besides children that these covers come in handy. Outlet covers are simply pieces of plastic that fit into outlets to protect anything from making contact with the available electric current. These covers protect children from putting their fingers in outlets, dogs and cats from licking them, and help prevent the rare accident as well. Pick some up at your local hardware store.

If you’ve ever opened up a light switch panel, you’ve probably seen simple situations that have three wires. One wire is the hot wire which carries electricity to the outlet. The other hot wire is only hot when the switch is activated and carries the electricity to a light or appliance. The third wire is the ground wire. More often than not, especially in older houses, this third ground wire may not be attached to anything. It’s important to make sure this ground wire is properly installed to the switch to avoid things shorting out or electrical fires.

Perhaps your house was originally built without air conditioning or you have added a full laundry room onto your home that wasn’t there when the house was built. If that’s the case, you may have outgrown your home’s electrical panel without realizing it. Adding high energy use appliances can easy place an extra toll on your electrical panel. The best way to know this is if your lights flicker when you start an appliance or you have a breaker regularly flip. It’s time to call an electrician if you think this may be the case.

Doesn’t it seem like electricity costs are always on the rise? Monthly bills are especially expensive during Florida’s hot and humid summers, when you need air conditioning to stay comfortable. Fortunately, you can lower your electric bill—and do your part for the environment—by following these five tips.

Here in the MD/DC/VA area, it’s not uncommon for us to lose power when a summer storm rips through. And while these outages sometimes last only a few hours, storms that have occurred over the past several summers have left people in the dark for several days at a time. At Kolb Electric, we’re big fans of Generac generators—they are among the most reliable systems available, and they’re the only ones we install. That said, there are a few things you should consider if you’re thinking about installing a standby generator:

You can’t stretch the amount of power that generators supply, so make sure you receive an NEC (National Electric Code) approved load calculation with each proposal. Kolb Electric will provide this calculation with our estimate.

Standby generators must be permitted prior to installation and inspected following installation. Kolb Electric will do the work of acquiring the necessary permits for you, and we want to remind everyone not to have your system installed by a contractor who says they can do it with no permit. HOA requirements and approval processes vary, but key concerns often come down to noise and location.

In the event that your standby generator installation does not require a permit, make sure to ask if it will be installed up to NEC code.

Some people install generators to keep the essential functions of their home running, such as the refrigerator and a few lights. Others install theirs to be able to carry on with life as if nothing had happened. Before you install a standby generator, decide what you’ll want to run and what you can do without. Remember—too much capacity will needlessly inflate the cost of your system, so try to be realistic when deciding.

At Kolb Electric, we’re committed to installing your generator efficiently and effectively. Even so, the generator installation process can get hung up at different phases, such as permitting, and may take up to a few weeks to complete—especially during the busy summer months. Don’t wait until a major storm has been forecast before you install your standby generator! Try to do it during the spring or fall, before you need it (and, more importantly, before everyone else needs it!).

What type of generator will you be installing? Air cooled or liquid cooled? Is it natural gas or propane? Will you be receiving a gas meter upgrade? At Kolb Electric, we’ll talk you through your options and help make sure your standby generator does everything you need it to.

Whenever you have any sort of electrical work done, you’re not just buying the system—you’re also buying the company doing the install. With this in mind, it’s important that you know their qualifications as well as those of the technicians who will be installing your generator. Ask the following questions:

Kolb Electric has been in business since 1925, and all of our staff is licensed and trained to install Generac generators.

Standby generators require on-going annual maintenance, which Kolb Electric will provide with a service agreement. Make sure you also register your Generac generator with the manufacturer for warranty claims.

The lowest bid may sound appealing, but the deepest discounts won’t offset the costs of correcting an improper installation. When you see a huge price difference from one company to the rest, you can be sure something is being left out: load calculations, size inspections, and gas meter upgradesare just some of the areas where some unscrupulous contractors may cut corners and leave you up the creek when the big one hits.

Standby generators are designed to protect your biggest investment: your home. Take the time to get accurate answers regarding your system to keep your family safe.

If you’re thinking about installing a Generac generator in your home, call Kolb Electric today!