Motion sensor LED stair lights let you safely and effectively navigate your steps while eliminating the need for any action. And because they turn off automatically, they also save power! We’ve recently installed these handy little LED stair lights and wanted to share the process with you.

wire that will be needed. It is best to order more than you need so that there’s slack in the line and enough to extend to where your power supply will be mounted.

It’s important to choose the correct wire gauge for the length of wire you need and amount of current that will be flowing through it. The key is to avoid voltage drop, which happens when the supplied energy of a power source is reduced as electric current flows through wire (or any other pieces of equipment that do not supply voltage on a circuit). The longer the run of wire, the lower the gauge of wire needed.

*If you need help determining the correct wire gauge, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

3. Using wiring from the

4. Use a run of wire to join the PIR sensor at the top of your steps with the power supply. You can wire both PIR sensors to the power supply using electrical tape or with

5. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

7. Finally, connect to power.

LED stair lights and

4. Connect your main line to the PIR sensor at the bottom of your steps, and begin connecting each step light with

6. Finally, plug the power supply into your wall outlet.

L.A. City engineers originally hoped that the LED bulbs would save 40% on electric bills. By the end of 2010, with 20,000 street lights switched over, the City experienced a surprising 55% savings in electricity on the new bulbs. The city has also found that the LED lights create brighter and more uniform visibility, reducing pockets of dark shadow that conventional street lights sometimes leave.

This is the largest LED street lighting project of its type in the world. Mayor Villaraigosa commented proudly, “We’re seeing L.A. lead the way.” The project is being funded, in part, by Federal stimulus dollars as well as the Clinton Foundation. Sarah Potts of the Clinton Foundation said, “The Clinton Climate Initiative was excited to work on this project mainly because L.A. was willing to be a mover on this. They were willing to set the bar for where energy efficiency street lighting could and should go. They took on a project that was much larger than any other cities were considering.”

If you want to go greener in your home or business, you can take steps that range from quick and simple to more ambitious:

Let’s make L.A. the greenest city on the planet!

–Kim Hopkins, Owner

The Electric Connection

Click here to visit our website.