Electricity savings help customers to reduce the energy bills and environmental degradation. With technology becoming more affordable, most households are increasingly relying on electrical appliances. However, inefficient equipment or usage ends up costing the consumer more money unnecessarily.  Low electricity consumption not only saves the energy costs, but also means using less fossil fuel, nuclear and coal to generate the power.

Consumers have all the control on their power needs, and the best way to achieve electricity savings is by understanding all the requirements and then optimizing the way they use the appliances. While some users might not be aware of the many small things they can do to reduce their reduce electricity costs.

Most of us will not be leaders with the ability to speak and the bravery to act as Martin Luther King, Jr., but we can change the world for the better in small ways.  Even one bulb at a time…

The world of illumination is changing quickly and advancing into a new frontier with light sources that are more durable, more energy-efficient and better for the natural environment.  While we still have a choice, future lighting installations with LED (light emitting diode) lamps will provide the best light for your home or office space.

To make the best choice, there are a few lighting facts you should know.  All LEDs are not created equal, so read on to educate yourself and make a change to LED with confidence.

Learn what light sources are available and the limitations and benefits of each light source, so that you may choose the best one for each application.

•The right lighting will always help you look better, feel better and perform to the best of your ability.

•The right lighting will always be energy-efficient.

•The right lighting will always work well with the natural environment, making the most of sunlight streaming in during the day and delivering illumination in the most eco-friendly manner.

•The right lighting will last.  Choose good quality bulbs and light fixtures that are guaranteed to provide excellent illumination, equipped with fine finishes and components that are durable.

1.  KNOW YOUR BRIGHTNESS LEVELS IN LUMENS

New bulb cartons are required to prominently display the brightness level (measured in lumens (lm)).  In the past we have determined bulb brightness in terms of energy consumption in watts (W), but now we must learn to think in lumens (lm).  Here is a quick conversion chart to help get you started:

Lumens            Old Incandescent                                             LED

2600 lm————→150W——————————–→25-28 W

1600 lm———— →100W——————————–→16-20 W

1100 lm————→75W———————————-→9-13 W

800 lm————-→60W———————————-→8-12 W

450 lm————-→40W———————————-→6-9 W

2.  CHECK OUT COLOR QUALITY:   Correlated Color Temperature (CCT) and Color Rendering Index (CRI))

•CCT is measured in Kelvin’s (K) and is an important factor determining the quality of light for your specific application: Warm White or Soft White is about  2700-3500 Kelvin’s (K) and Bright White light is about 4000 K+

•CRI is measured on a scale of 0-100 and is an important measure of the degree to which your light source will show the true colors of all that is being illuminated.  Color rendering for decorative indoor lighting applications should be between 85-100.

3.  FACTOR IN DIMMING CAPABILITY

Most dimmers work by reducing the amount of electricity sent to the bulb.  But with LED the correlation between brightness and energy consumption is much different than with incandescent illumination.

Because of this difference, LEDs are not always compatible with traditional dimmer switches.  You either have to replace your switch with one that is compatible with LED or look for replacement LED bulbs that are compatible with standard incandescent dimmers.

4.  FIND SUITABLE BULB-TO-LIGHT FIXTURE MATCH-UPS

The reflector and fixture type will play a significant role in determining the light output from the light source (bulb).  Look at colored lenses and fitters, as well as shades and shielding to determine how they will help steer and direct your desired level of illumination.

When looking to replace an incandescent bulb with an LED bulb in a lighting fixture where the bulb will be totally enclosed, be sure to check that your LED is specifically made for an enclosed or recessed light fixture.  LED bulbs run cooler than others, but they do produce heat. To protect the quality of the LED chip and the performance of your LED light source, LED fixtures are specifically engineered to provide adequate heat-sinking.

5.  BEWARE OF THE LOWEST “BINNER” and COMPARE PRICE VS. QUALITY

“Binning” is the process by which LED chips are sorted.

Prior to being marketed in fixtures or light bulbs, LED chips are sorted into bins according to their light output (lumen output) and color temperature.  There are clear standards set to measure the lumen output of each LED chip.  LEDs chosen from bins with higher lumen output are of better quality.

Color temperature is determined by matching up each LED according to a chromatic line grid for a specific color temperature.   LEDs chosen from larger bins contain more color variation and are not as bright.

Due to the process of “binning,” LED chips vary in their quality—especially in relation to their lumen output and color, so it is important to purchase LED light bulbs and LED light fixtures from a reputable dealer.

Philips medium base LED

Philips LED reflector, perfect for landscape and outdoor lighting applications

Dimmable LED from Philips

Kolour One LED bulb offers full 180 degree illumination

Look for all new LED bulbs from Philips, Kolour One, Satco and Bulbrite, now available at 1800lighting.com

What would our lives be like without electricity? Electricity is a necessary utility in today’s world, required for a variety of work and entertainment tasks and to power the appliances used throughout the home. However, if your wiring is not set up properly, you may be facing an electrical hazard that could cause a family member to become injured or start an electrical fire.

In general, you should follow standard safety procedures around the home to prevent problems, like shutting off the power from the service panel before attempting any electrical repairs and making sure not to overload electrical outlets. Furthermore, any unusual power surge or unusual behavior from your lights and appliances indicates a problem that requires immediate attention from an electrician. The following guide contains just a few indications that your home may be at risk for a major electrical issue.

The GFCI outlet helps protect you and your family members from electrical shocks. You may recognize this type of outlet—equipped with both a “test” and “reset” button—from the inside of many kitchens. These are located in the kitchen because, as we all know, water and electricity do not mix. Water interrupts the regular flow of electrical current so that it may flow through you instead. When the GFCI outlet senses that the electrical current is not flowing as it should, it immediately shuts off. If this type of outlet is missing from your bathroom or kitchen, you should call an electrician as soon as possible.

Another cause for immediate electrical repair is excessively hot dimmer switches. If you have dimmer switches in your home and one or more feels very hot to the touch, this is not normal. It most likely means that the dimmer switch is overloaded, exceeding the maximum allowable wattage.

If the circuit breaker seems to frequently trip for no reason, it could indicate an overloaded circuit or a short circuit. This can be caused by something plugged into an outlet or by the wiring itself.

Making the decision to install solar panels in Los Angeles is one of the biggest decisions (and investments) a homeowner will make. When it comes to solar panels, and living ‘green’ it is important to do your homework. Here are a few things that you need to know before you go solar.

Increased Property Tax

Adding solar panels to your Los Angeles home will not cause a reassessment of your property. The only way that a reassessment of your home’s value would happen (in most states) is when you add on square footage to your home such as a room addition.

Electric Bill

Before purchasing and hiring a solar panel installer in Los Angeles, pay close attention to your electricity bill for a month or two. The more you spend in electricity the higher your tier is. What this means is the more money you have to send to your electric company, the more you will save by installing solar panels.

How Long Do Solar Panels Last?

Typically, solar panels will last approximately 30 years. In Los Angeles, all you need to do to maintenance them is to hose off the panels during the summer and keep leaves off them. It’s really that simple!

Harm Roof?

If a professional solar panel installer in Los Angeles installs your solar panels, they will not harm your roof. In fact, they actually protect the roof directly under them from weather, heat, and light. Not only that, but you can save on heating and cooling costs of your home when your solar panels are installed properly.

The Electric Connection is waiting for you to pick up your phone can call them with any questions you may have. They will answer all of your questions and ensure you are satisfied before you purchase your solar panels for your home.

Any building, in any industry, in any area of the world, is susceptible to having potentially hazardous and radioactive exit signs installed throughout their building.

This could mean they are in schools, near your office, or anywhere else where a radioactive setting probably isn’t a desired situation to be in.

This is why we thought it was necessary to create this post to help and guide you towards identifying, removing, and finally replacing your radioactive exit signs with new signs that are much safer and even efficient, saving you money over other alternatives.

Firstly before we can remove and replace these seemingly nuclear exit signs, you have to be able to identify if you have them or not. But before that, lets explain what exactly makes these exit signs radioactive.

How are some exit signs radioactive?

Just the same way as some exit signs are safe, it is all in the way they are built. For some reason, whether it be technology of the time or something else, people assumed it was a good idea to create exit signs with Tritium, also known as 3H or H-3. Tritium is a radioactive isotope of hydrogen, causing exit signs made with this to be radioactive by default. The only seemingly positive upside to these exit signs is that they are non-electrical, meaning they won’t rack up anything in electricity bills.

But before you become alarmed with what we have shared with you so far, tritium emits only a low-energy beta radiation, which in turn causes the sealed glass tube it is in to glow (causing the exit sign to give off the illumination it requires). Thankfully, it is rather well known that this type of radiation can hardly (if at all) penetrate a piece of paper or clothing. So while yes it is a very low level (energy wise) type of radiation, the fact that there are alternatives that will remove radiation entirely from your building is all the reason to uninstall your tritium exit signs and replace them with something more safe, like LED exit signs.

Now that you understand the technology and how tritium in exit signs work a little bit more, let’s go over how exactly you can identify whether or not you have these types of exit signs in your building.

Identifying a radioactive exit sign should be fairly easy. All of these signs are required to have some sort of “Caution of Radioactive Material” warning on the fixture.

If you do find such a warning label, it is safe to say your light is made of tritium. Another tell-tale sign is whether or not your signs are connected to an electrical source or not as tritium signs do not require any such connection.

Once you’ve identified if you have a tritium exit sign or not, if you do happen to have one, you may continue on to removing and replacing it with the alternative exit sign, LED.

As with any lighting fixture, we recommend to bring in a professional contractor to do the job. But as a general guideline, you can typically recycle your tritium signs by returning them to the manufacturer or place of purchase.

If you purchased the building with them pre-installed and are unsure of where they came from after inspection of the signs for any brand markings, you can try two things:

1: Try contacting the previous building owner or collect records of where they were manufactured

2: Recycle them with a third party. like these), buying them, then installing them yourself or with a professional (we recommend a professional).

Here are a few things you should remember and keep in mind when dealing with a building that has radioactive exit signs: