Pool lighting makes up a major part of your overall swimming pool costs, so it’s important that you figure out which type works best before you install them. The two major types of pool lighting are in ground lighting and above ground lighting, and your budget, needs, and preferences all factor largely into deciding which type to install. We’ll help you break down all types of pool lights to help you make the best choice for your Maryland, Virginia, or Washington, DC home—just keep reading!

One of the biggest benefits of in ground pool lighting is its streamlined look and even lighting. The two primary options for in ground pool lighting are LED lighting and fiber optic lighting (we’ll get into the pros and cons of each further down in this blog post).

Usually much cheaper than in ground pool lighting, above ground pool lighting is perfect for DC area homeowners looking to install a pool on a budget. There are a number of different ways to install above ground pool lighting, including:

Floating Pool Lighting

Floating pool lighting is exactly what it looks like. This type of pool lighting involves lights that bob up and down on the surface of your pool. It is available in a variety of colors and shapes, from orbs, cubes, and pods to more creative features like jellyfish shapes, flowers, and more. Floating lights can be solar powered and tend to use bright LEDs, but since they move around they don’t provide perfectly even lighting.

Magnetic Pool Lighting

If you have a soft-sided pool, magnetic pool lights are perfect for you. These two-part lights can be attached to the liner of your pool for an in ground pool lighting appearance with above ground ease.

The two major types of in ground pool lighting are LED and fiber optic, and each type has its own advantages and disadvantages for homeowners in Maryland, Virginia, and Washington, DC. Consider the following:

LED lighting – LED lights are housed in waterproof bulbs that can be removed to change the bulb. The bulb itself should last around 10,000 hours, however, so you won’t need to perform even this simple task very often. One to two bulbs should be enough to illuminate your entire swimming pool.

Fiber optic lighting – bulbs for fiber optic pool lights are located out of the water, making them even easier to access and replace than LED pool lights. To illuminate a whole pool, you’ll likely need more than one fiber optic light, though, which can get expensive.

LED lighting – LED lights range from $400 – $900 installed, and bulbs can last anywhere from 10 – 15 years. Replacement bulbs will run you about $200 – $400.

Fiber optic lighting – a fiber optic pool lighting system will require a fan to keep the light cool, meaning fiber optic pool lighting will be more expensive than LED lighting—think anywhere from $900 – $1,500 per bulb system. Bulbs typically last about 3 – 7 years, and replacing them will cost about $200 – $300.

LED lights – despite having the lighting components under water, LED lights are very safe and have a very low risk of failure. In addition, LED lights use very low voltage, which mitigates the risk further.

Fiber optic lighting – since there are no electrical components housed in the water, fiber optic lighting has close to zero risk of electric shock.

LED lights – LED lights can be used to fill your whole pool with light and illuminate the whole thing at once. They can also change colors to create a truly unique look for your backyard.

Fiber optic lighting – these types of pool lights aren’t as good at illuminating the whole pool at once, but they can create points of light to give your pool a sparkling, starry appearance.

In purely practical terms, LED lights have the edge over fiber optic lights—they are less expensive, easier to maintain, and provide much brighter illumination. But there are advantages to both types of pool lights, and Kolb Electric can help you find the perfect fit for you and your home. We can also provide you with further pool lighting tips here.

Many people have heard about power factor correction, but aren’t too sure about exactly what it means, or is. Here is some basic information about it, in very simple words. Power factor is essentially a measurement of the effectiveness with which your commercial business uses the energy that’s supplied to your location.

In an industrial setting, you are able to reduce the amount you pay as a power bill, by cutting down the power factor surcharges that show up on various electricity accounts; these show up as the peak demand charges from your power company. This is exactly the reason why there is such a huge growth in power factor correction.

Currently, many businesses are being charged via a kVA tariff, rather than a kilowatt one. This also means there is a distinct possibility that your electricity service provider is charging you for power they are supplying to you and which you aren’t really using. In short, you end up paying for power that’s going waste. The other considerations:

Every industrial setup has different power requirements, different types of equipment and tools that run on electricity; and it’s important that you connect with a company that is able to understand your requirements and provides custom solutions. Once they help set up the right kind of power correction equipment, you can benefit in a number of ways.

As a business owner, you know you want to reduce operational costs and while you are sure to have a number of other measures in place, understanding how power factor correction will help you, is one way of making a significant change. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of power factor installation solutions. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

A modern convenience often taken for granted, electric power, can be found everywhere. To route electricity from the power station to your wall outlet requires many steps. Residential house wiring includes a variety of wiring and control devices to ensure safe and reliable service.

Electricity in the home is distributed by means of branch circuits. Furthermore, each branch circuit is supplied via a circuit breaker sized per the expected load on the circuit. A typical lighting and receptacle circuit will be rated at 15A. Because of their size, larger loads like ovens, clothes dryers, and air conditioning units are given dedicated circuit breakers.

A typical home can have dozens of 15A circuits, and several 20A, 30A, or even 50A circuits. Yet the total of all these breakers is much more than the size of the main breaker. However, this is intentional. It’s highly unlikely that every circuit will be fully loaded at any one time, so a demand factor is taken into account to keep the main breaker at a reasonable size.

A wood-framed home will typically use solid copper non-metallic sheathed cable for the majority of wiring applications. Solid conductors are easy to terminate and cheaper than equivalent stranded wire. The AWG size of the wire is determined by the expected load on the circuit and by the size of the breaker protecting it. You should never connect a wire to a breaker that is too large to protect it, as an overloaded wire can easily catch fire.

The competition is steep and the lighting designs are sensational.  Among the leaders in the race for the most unconventional ceiling light fixture designs of the year, these standouts are exquisitely different and–although they may not fit in with everybody’s interior design scheme–they make for mind-altering artistry that brings the “wow” factor to a select few who are daring enough to shine outside of the box!

TEN:  Attractively AKIMBO

“Akimbo” from Tech Lighting

NINE: Outer bound with ORION

“Orion” from ET2

EIGHT: Unearthing URCHINS

“Urchin” pendant light from Varaluz

SEVEN:  Cultivating CASSINI

“Cassini” from Trend Lighting

SIX: Mixing it up with MIMI

“Mimi” from Maxim Lighting

FIVE: Hoodwinked by HOUDINI

“Houdini” chandelier from Corbett Lighting

FOUR:  Zanny ZIUM

“Zium” from Elán Lighting

THREE: Captivating CATALYST

“Catalyst” from Fine Art Lamps

TWO: Metaphysical MICRO

“Micro” from Eurofase

ONE:  Spellbinding STRANDELIER