When you are purchasing a home, it goes without saying that you want to be sure the house is structurally sound, and that there are no lurking problems that will surface later and burn a hole in your pocket. It’s why many people get a building inspection and pest inspection done before they sign on the dotted line. While all of this sounds good, what most people aren’t aware of is that they can and should get an energy audit done too.

An electrical audit analyses the major components of the house structure; this includes:

In short, it gives you a very detailed picture about how the buildings works as a whole. For a couple of hundred dollars, you can get an energy audit done from a professional. This audit can save you a significant amount of money in the long term; it identifies the features in the house that require correction to enhance the energy-efficiency. At times, the energy audit results can play a pivotal role in your decision of whether you should invest in a particular property or not.

If you find that a house lacks in energy efficiency, but you still want to buy it, the audit results can become a bargaining tool; it may help you get the seller fix the problem, or you may be able to get the property at a much lower price. No matter which way you look at it; getting an electrical audit is a very good idea. In addition to the ones mentioned above, there are a number of other benefits to getting an electrical audit done, such as:

The simple fact is that spaces that are energy-efficient are also more comfortable to live in. Energy-efficiency upgrades will ensure that the heat will be evenly distributed across the home and your home will be warm in the winter and cool in the summer.

If the indoor air quality in your home is poor, it can cause allergies as well as other health problems. When you choose to get an electrical audit done, the professionals that are conducting the audit, carefully analyse the ventilation in your home and also recommend what can be done to improve the indoor air quality.

Energy efficiency may seem like an isolated aspect in the sustainability of your home. But when discrepancies in the building structure come to the fore during an energy audit, it’s indicative of the fact that many features are constructed poorly and that they will fail before their time. Once you have the audit results, you will get a clearer idea about what will have to do be done to improve the building envelope as a whole.

When you are hiring the services of an electrical/energy auditor, you should keep in view the fact that not every one of them uses the tools and follows the required processes while the audit is being conducted. Ideally, the auditor should use tools such as a duct blower, an infrared camera as well as a blower door.

The blower door is essentially a fan that has to be mounted on the doorframe. It efficiently depressurises & pressurises the home to measure what the air leakage is like. The duct blower performs the same function, but is attached to the ducting in the house. The infrared camera helps detect air leakage in the walls and the heat losses too.

For more information about electrical audits and the best electrical solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

One of the best opportunities to save money is to convert Metal Halide and High Pressure Sodium High Mast lights over to LED. A typical high mast light consists of a tall pole, 50-150 tall and contains multiple fixtures attached to the pole, typically 4 to 12. The lower poles may be equipped with 400W Metal Halide or High Pressure Sodium bulbs, the taller poles typically are installed with 1000W Metal Halide or High Pressure Sodium bulbs.

Generally speaking, home and business owners in Rockville are told to avoid the use of technology to accrue higher monthly/yearly energy savings. But what if we told you there is tech out there that is specifically meant to aid in saving electricity and reducing your usage? It’s true, and the certified electricians at Kolb Electric are here to talk about them!

We’ve been supplying top-tier electrical services in Rockville for years. Nothing is more important than your satisfaction and happiness, and whether you need installation, repair, or just a bit of fun information, we’re more than happy to provide!

There is actually a staggering number of tools and equipment out there for saving you energy and providing environmentally-friendly advantages in Rockville. Our favorites include:

When you need high-quality, dependable service from certified electricians in Maryland, DC, or Virginia, you can always count on the team at Kolb! We make your needs a priority, and for electrical services in Rockville, there’s simply none better!