It seems like everything you buy today requires an electrical outlet. If you find yourself living in an older home or one with out-dated wiring, you could also end up at a loss for power. With electrical outlets spread sparsely around your home, it can be difficult to find enough outlets to plug in a lamp at the location you want or plug in all your electronics in the same spot. Fortunately, you do have some options for expanding your electrical accessibility and capacity.

The most common fix for this problem is to use extension cords. Extension cords can go extend as far as 150 feet, but are not always an ideal permanent solution. If you were running a significant amount of power through a long running extension cord on a regular basis, it would be a better idea to install an outlet at that location. With a heavy loaded extension cord you run a greater risk of fires and overloading the circuit. Undersized extension cords can overheat and cause a fire. If you will be running several electronics of the same outlet (television, computer, entertainment system) you should invest in a power bar with a surge protector. A power bar will be able to handle the larger electrical load and protect your valuable electronics from surges.

Another option would be to use an adapter to split two standard electrical sockets into four. This can be helpful when you need to plug in an additional lamp or phone charger in your room. If you find that you are tripping your breaker when you are plugging in more devices or appliances onto an adapter, power bar, or extension cord, you are probably overloading your circuit. The best course of action would be to have an electrician install a new outlet on a separate circuit.

While having new outlets installed by a professional electrician is the safest idea, it is not always possible in every situation. If you are a renter you may not be able to or want to upgrade the current electrical system. Or it is possible that your current breaker or electrical panel may not be able to handle additional electrical outlets. If that is the case, have a licenced electrician inspect your home electrical system to ensure that you are able to safely add on additional outlets. While planning for new outlets, identify areas that would be optimal for having power and covering the room appropriately. This way you can avoid problems down the road and installing an excessive amount of outlets in one room.

It is important to use undamaged extension cords and not run one extension cord off of another. For the best peace of mind, have one of our electricians install an additional circuit and outlets in your home. This will keep your home up to code and reduce the risk of fires significantly.

“Hi. I’m Craig Bryant with Bryant Electric Service, and I’ve been in business in Austin for almost 30 years now. I’ve been asked by many people a lot of different things about electrical work, and so I hope I can help with answering some of your questions as well.

OK. I’ve been asked many times about the difference between aluminum and copper wire, and the biggest difference is that copper is just a lot more stable metal than aluminum. And electricity, the biggest enemy to electricity is heat. The hotter it gets, the more important it is to have a stable metal. Aluminum is good but not as good in that in the long run over many years or decades because the instability of aluminum, when it heats up it contracts and expands. As it cools down, it contracts and heats, it expands.

So that happening over time over years and decades especially at your main service or wall plugs or something then that causes a loose connection and it starts arcing and the arc can create a fire over time. That just doesn’t occur in copper ever if it’s installed properly and it’s real tight at the beginning when it’s installed.

So the other problem with aluminum is oxidation. As they’re both exposed to air, copper oxidizes as you can see when it turns green, but it doesn’t affect the connection of the wire. Whereas aluminum, when it oxidize, it creates this crust that builds on it. And you’ve probably seen it before, but this crust can sometimes get as much as a quarter inch thick. And besides the fact that the metal is not as compatible to the heat and temperature problem. With that crust building up, it will also create a gap between the connections that can cause an arcing.

So copper is always better than aluminum and everything except price. And the main reason that it’s being used is because it’s so much cheaper.”

In the quest to stay comfortable and combat escalating temperatures in our area, many homeowners turn to fan installation to bolster the results of traditional HVAC cooling. Our Washington, DC electricians install them all, from ceiling fans, to mechanical attic fans. When choosing for your home, do you know which fan installation is giving you the best results? You might be interested in what our Washington, DC electricians have to say on the topic!

No matter the fan type, they can assist in reducing energy costs and increasing comfort in the muggier months. They don’t actually reduce the temperature of the room, so how do they help? Well, fans assist in removing moisture from your home, keeping humidity under control somewhat. Additionally, moving air naturally feels cooler on the skin, helping to reduce body temperature; thus, you need to run your AC a bit less.

Additionally, in the case of a ceiling fan, they can provide a unique and interesting way to add some style. Another layer of design, or an additional fixture can do a lot for the beauty of your DC home.

While ceiling fans are a slightly more direct cooling method, an attic fan can do just as much for your home, if not more! An attic fan is installed in ,where else, the attic. This fixture can assist in reducing your cooling costs by up to twenty percent! How? Well…

Think of your attic like a big envelope, or bubble. It tends to hold onto its temperature, and because it is exposed radiant heat (sun) and collects remnant heat from your home (heat rises), it tends to be much much hotter than the rest of your home. If the inside of your home is seventy, your attic could be up to one hundred! This basically boils down to you having a massive natural heat source directly above your home. Not good for business when you’re trying to cool things down!

Attic fans mitigate and reduce attic temperatures, and by extension, the temperature of your home! They do this by improving ventilation, and increasing cool airflow throughout the attic. The difference can be huge!

Honestly, our Washington, DC electricians would suggest both. With a proper attic fan installation augmented by ceiling fans, you can find yourself relying on your HVAC system so much less. This is drastically less expensive, and keeps your cooling system from overworking (which makes it last longer, and need less repair) to boot!

Looking to begin relying less on your cooling system? Or maybe you just want a little more comfort for your DC home. Either way, our experts can provide the installation services you need! Contact our specialists today to learn more!

Surge protection is part and parcel of every electrical system and many devices such as HDTV’s and computers are plugged into surge protection devices. However, it’s not necessary to have individual devices to protect the different appliances or equipment in your home. It’s possible to get a centralised surge system installed into your property’s main electrical panel; this turns your home into a single large surge protector.

This kind of a system offers a significant amount of convenience. Most homes nowadays have a large number of appliances and equipment ranging from washing machines, dishwashers, electric stoves, ovens, refrigerators, HVAC systems, home PCs, printers, scanners, pool equipment, hot water systems, outdoor lighting, irrigation system, home entertainment and music system and more.

Based on the number of equipment and appliances you want to protect, a centralised surge protector can be much more affordable than just getting individual surge protectors installed. This also extends protection to all the other larger appliances in your home, that don’t already have any surge protection adapters. The different types of surges that can occur are:

The long and short of it is that surges can occur at any point of time and this is what makes it important to have a centralised system that will provide protection to all the equipment and appliances in your home.

If you notice the lights in your home flickering, that is generally caused by an electrical surge. Typically, these types of surges won’t burn out your appliances and devices, but they do have a negative impact on the longevity of this equipment. When it comes to getting surge protectors installed, the high-cost of the damage caused by electrical surges to our electronic equipment and appliances should be the topmost priority.

Current day home appliances such as ovens, dishwashers, refrigerators etc. are becoming increasingly sophisticated and operate on smart technology. They have a large number of closely intertwined, sensitive components; an imbalance or impact to one of them has the potential to impact the rest of the components too. This holds true for larger systems such as the hot water and HVAC systems too.

Even when these systems aren’t being used, major electrical surges can cause heavy damage to them and will shave years off of their operational lives. Without you realising it, this can result in thousands of dollars of losses in the duration you live in that home. In some cases, a massive power surge can cause irreversible damage to your HVAC or hot water system, and replacement becomes the only option you are left with.

Keeping all these aspects in view, it becomes extremely important to ensure that you have a high-grade, reliable surge protection system installed in your home. We at Allround Electrical can provide excellent electrical upgrade maintenance solutions to commercial and residential customers.

We will survey the space, make note of all the equipment and appliances on your property and will provide solutions that are best-suited to your needs. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263