Tripped circuit breaker: many of us have experienced them at some point in our homes, yet instead of asking ourselves, “Why Do Breakers Trip?”, we reset the breaker without much thought. Before flipping the switch back over to the “ON” position, however, it’s important to understand why the breaker tripped in the first place, and what can be done to keep it from happening again.

As a Top Dallas Electrician, ElectricMan Inc. understands the danger of ignoring the warning signs of a tripped circuit breaker. But first, you need to know what a breaker does and how it works.

The Job of the Circuit Breaker

Simply put, a home or business circuit breaker is a safety device that monitors the amount of electrical current going through the electrical wires in your home and shuts off the circuit if too much electricity is being pulled through it, or if there is any disturbance in the current that could result in a fire.

Whereas a fuse performs the same task but can only be used once, a circuit breaker can perform over and over with the use of a switch that trips to indicate when it has effectively cut off current to a particular area.

What Makes a Breaker Trip?

So, Why Do Breakers Trip and what kind of things could cause a circuit breaker to trip? Some of the most common causes of a tripped breaker include:

For example, in some homes, running a microwave, a toaster oven and a refrigerator all on the same circuit may cause your wires to overheat, tripping the breaker. In this instance, making the load a little lighter, or splitting the circuit, may do the trick in keeping it from tripping the breaker.

Ignoring a Tripped Breaker is Not a Good Idea

Because of the many reasons why your circuit breaker could be tripping, and because of the purpose of the circuit breaker, you should never take a tripped breaker lightly. It’s important to understand that the circuit breaker is a safety device; simply switching the circuit back on without investigating the culprit can become costly in the long run and, in many cases, extremely dangerous.

If your breaker trips consistently, chances are there is a potentially dangerous electrical issue that needs to be looked at. ElectricMan Inc. is a Top Dallas Electrician with over 27 years of residential and commercial experience in the electrical field. Call ElectricMan Inc. at 972-792-7270 to make sure that your home is safe and free from the risk of a short or a fire.

1.  Size and install smartly:  Whether you are installing a crystal chandelier over your dining room table or as a central design feature in your master bedroom, the diameter and height of your fixture must be in proportion to other items in the room.  The diameter of a dining table fixture should be 12 inches less than the diameter of the dining table.  The height of the chandelier should allow for a clearance of 30 inches from table top to the bottom of the fixture.

Quoizel’s “Tricia” chandelier adds elegance to this contemporary dining room.  * Interior design by Sandra D’Amata International, Inc.

If your crystal chandelier will be a central focal point in your foyer, living room or master bedroom, take into account your ceiling height and choose a chandelier that may be installed to leave at least a 7-foot clearance from the floor to the bottom of the chandelier.

2.  Reflect Resplendence:  The true beauty in a crystal chandelier extends far past the light source, decorative finishing and crystal configuration.  Crystal facets reflect and refract a brilliant array of colors and illuminating effects, especially when combined with sunlight and/or electric light sources.  Matte finishes on furniture and surrounding walls work well with crystal illumination.  Avoid creating glare and unflattering shadows off metallic or shiny surfaces.

3.  Choose the Right Bulb: Most chandelier bulbs will be candelabra-based, yet what type of candelabra bulb you choose will make a tremendous difference in both the total presentation of your chandelier and the overall illumination in your room.

Crystorama’s “Mercer” chandelier–installed with dimmable LED candelabra bulbs–provides magnificent illumination in this master bathroom.*

Frosted bulbs provide a more subdued illumination. They are recommended for most traditional dining room chandeliers.  Clear bulbs work well with chrome finished retro-modern chandeliers and may add to the radiant sparkle of modern crystal chandeliers.

For a more traditional look, flame tip bulbs are the right choice.  Flame tip bulbs also look best in chandeliers with faux drip-candle holders.  Torpedo bulbs are less tapered and present a contemporary look.  Round bulbs add an eclectic vibe to a traditional chandelier.  Uniquely-shaped and/or textured candelabra bulbs may add a custom-designed artistry to your chandelier.

As summer rolls in, one thing everyone in Des Moines can be thankful for is a working air conditioning unit. Summer temperatures in Des Moines average upwards of 80 degrees, and when combined with the humidity in the Midwest, a home without a working air conditioning system can quickly turn into a miserable experience. When temperatures do rise and you find yourself running your AC on a daily basis, you will also find a rising energy bill because air conditioning units often use quite a bit of electricity. This also means that the rest of your home’s electrical system needs to be functioning at its peak in order to for your air conditioning unit to be working properly. In the event that your AC unit is causing problems with your home’s electrical system, it is important to have a local electrician you can trust to fix your problem

At Electrical Gurus, we service all of Central Iowa 24 hours a day and 7 days a week. If your home’s electrical services are being interrupted while running your AC, then we can help. As Des Moines’ Top Rated Local® electrician, Electrical Gurus is capable of diagnosing your residential electrical issue and fixing the problem. Whether your home requires basic maintenance or a complete house re-wiring, our team of electricians can ensure your home is capable of running its AC unit without issue. Additionally, we can help your home’s energy efficiency to reduce energy costs and eliminate future problems of your electrical services being overwhelmed. Contact us online or call Electrical Gurus today at 515-446-7040 for a 24 hour electrician you can trust.

Wall outlets are the primary point of interaction most homeowners have with their electrical systems. Those of us who aren't electricians or contractors may never open our circuit boxes or run a wire through the wall, but we plug and unplug things from our outlets every day. Those outlets don't last forever, however, and they need to be upgraded and replaced at some point to help protect the safety and security of your home and family. Read on to learn when it's time to make the switch.

Don't Take Your Outlets for Granted

Given their steady, reliable performance delivering electricity to our appliances and devices, it's tempting to take our outlets for granted, but they do actually have a lifespan and can become obsolete over time. Especially if you live in an older house, your outlets, and the wires they are attached to, may be deteriorating. What's more, older electrical outlets might not be up to the current standards of your local building code.

So why should you care? Because old outlets can turn into a major safety hazard, most notably as the source of a house fire. Sometimes, the wires connected to the outlets become loose or frayed, creating an immediate fire danger – but this can be prevented by installing new, modern models. When you upgrade to the latest, up-to-code outlets, you can also add safety features like a ground fault circuit interrupter, which decreases the possibility of electrocution. You can also have an electrician install convenient features like combo outlets that charge your USB devices, or kid-safe outlets in areas accessible to young children.

When to Bring in an Electrician

The easiest way to know when you need to update your outlets is to have an electrician inspect your home. There are also other warning signs that can clue you in when it's time to make a change:

Obviously, if you detect smoke or a burning odor coming from your outlet, you should call an electrician immediately – or better yet, the fire department. Fires can spread quickly within your walls before you even realize you have a problem.

If you need a hand upgrading your outlets or other parts of your electrical system, get in touch with an expert electrician today.