As a homeowner, you face loads of trials and tribulations. Home maintenance, jobs, relationships, and plenty more! Life is rough enough without adding the uninvited members of the animal kingdom into your home, and when you find a chewed wire, you’ve unfortunately got just that! But, hey, don’t stress. The experts at Kolb Electric are here to help!

Why do rodents chew on the wiring in my home?

Rodent teeth are very capable of doing serious harm to your wiring. Why do they even chew on wires? Well, interesting fact, that. A rodent’s front teeth never finish growing, so they chew on anything around to control the length of their incisors. Cool fact, but bad news for your wiring!

Rodents chewing on electrical wires can bring you a world of frustration at the minimum, but can be a source of serious harm at worst! An infestation left unchecked can cause:

Well, traps are always an option, of course. But that remedy tends to be a little unreliable. The unfortunate fact is there’s no magical remedy here. There’s no magical rodent-proof wire coating, or specially crafted mouse vacuum. It really comes down to prevention, and failing that, quick action. To prevent a rodent incursion:

What do I do if I already have a rodent problem?

Call a pest-control specialists right away. It’s frustrating, and costs money you didn’t want to spend, but with each passing week you run the risk of paying more than a few lost cracker crumbs. Rodents chewing on electrical wires is no joke, and left unaddressed will leave you in a bad way, electrically speaking.

Once the nests have been handled, call on an electric professional (like us!) to inspect wiring as soon as possible. Damaged wiring can be caught and fixed before you end up with a real costly problem on your hands.

If things don’t go your way and you end up with some damaged wiring, don’t stress! The experts at Kolb would love nothing more than to assist, bringing you the expertise and service you need to set your wiring right again. Contact us today to learn more about our repair and installation services, or to set an appointment!

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion

One minute, you're watching television with your family – the next minute, all the lights cut out and the TV goes black. Blackouts are relatively rare in most regions of America, but when they do occur, they can cause serious problems for any family that relies on its electrical work. Read on for advice on how to be prepared for an outage so you aren't left in the dark.

When the Lights Go Down in the City

Follow these tips to make sure you're ready when the lights go out:

Making the Best of a Power Outage:

If you are prepared, power outages don't have to be a bummer – they can even be an opportunity for family fun. For assistance in choosing and installing a generator, call an expert electrician today.