The energy saving power of lighting has quickly grown over the years, and still is to this day. In the commercial and industrial lighting space, a lot of companies are making the switch over from older technology lighting fixtures like metal halide and other HID lights over to LED fixtures.

On top of the energy savings LED can bring over older types of lights, commercial dimmers can yield even great energy reduction and thus a greater reduction in your facilities utility bills month to month.

So what is a dimmer, do dimmers save energy, and should I use a dimmer switch? Let’s find out!

A dimmer switch for LED lights gives you the control through a simple panel to change the amount of light that a lighting fixture (or fixtures) produces. You can dim lights as low as you so desire or as high as your light was designed to allow.

By having a commercial dimmer switch at your disposal, you can change the lights to match the mood, atmosphere, or even time of day to your needs and facilities guidelines.

Now onto the question you’ve all been waiting for, do commercial dimmer switches save energy?

The short answer is yes, dimmer switches do save you energy. But let’s discuss the history of dimmer switches and how far they have came.

Back in the day LED dimmer switches did not reduce energy because of the way they worked. Instead of reducing the amount of energy being used, they simply converted the energy not being used into heat instead of full illumination capability of the light bulb. Nowadays, dimmer switches for LED lights work by actually reducing energy used and only uses enough energy that it needs to power the light bulb at the setting of your dimmer.

Some of today’s dimmer switches use something called a “Triac Switch.” This Triac Switch works by cutting off power to the light fixture up to 120 times (variable) per second. Thus, the human eyes cannot detect a flickering and just see’s a constant flow of light. But while triac switches are used for smaller bulbs, bigger lighting fixtures use something called a send us a message and we will for sure help you out with that decision!

We usually expect to find wiring troubles in old homes where the wires are made from out-of-date material that is no longer up to code. But electrical repair needs can crop up in the most modern homes: all it takes is a bit of shoddy installation or damage to a few connections and you can end up with wiring that malfunctions, leading to power loss or—in the worst case scenario—an electrical fire.

Do not attempt any repairs to your wiring yourself unless you are a trained electrician with access to pro-level tools. High-voltage shocks are something to take seriously. Pick up your phone instead and put in a call to your local electrician and arrange for repairs.

With the kind of Maryland weather we’ve been having this month, you’d think we live in a subtropical climate! And while steady rain can be relaxing and good for those of us who raise a garden, it can pose some risks as well. What risks? Well, there’s always the usual dangers of a storm, but what we specifically want to cover is water damaged wiring.

The certified electricians at Kolb Electric take your safety and the safety of your home seriously, so if you’re at risk for damaged wiring, we want you to know what to do! Suspect you may have water damaged wiring in your home or business? Contact Kolb today!

You hear us going on and on about the dangers of electrical equipment, but we do this for a reason. It only takes a split-second mistake and zap; you’re in some serious trouble! Left alone, water-damaged electrical wiring can:

If and only if you have had submerged wires that have since dried out, and these wires have been totally shut off (at the breaker in the electrical panel) you may be able to utilize heavy-duty work gloves to move the wires. WE DO NOT RECOMMEND THIS. Only do this if leaving the wire poses an immediate risk that must be resolved. Otherwise, just let the experts do it. Never take chances that may harm you or someone else.

Having trouble with your wiring after the downpours we’ve been dealing with here in Maryland? Contact the specialists at Kolb to get the repair and replacement you need!

An energy recovery ventilator is a mechanical ventilation device which is integrated into an HVAC system. The ERV acts as a heat exchanger, and facilitates the transfer of heat between incoming and outgoing airstreams as it ventilates a home. This means that in the winter, when you are paying to heat your home, the ERV uses the heat in the stale outgoing air in order to warm up fresh, incoming air before it ever makes its way into your home. Additionally, during the summer months, when you use your AC to cool your home, your ERV will absorb heat from the incoming air into the outgoing, low-quality air. Plus, the airstreams are allowed to mingle just enough to facilitate the transfer of humidity as well, further boosting your comfort.

The name kind of says it all in this case: recovering energy as you condition air throughout your home allows you to live in great comfort without putting the energy that you’ve paid for to waste. Using an ERV means that your home is sufficiently ventilated, so that you can breathe fresh air of a high quality without having to strain your HVAC system as a result. To learn more or to take advantage of an ERV in your home, just give us a ring.

Time, experience and technology are constantly improving the way we do things. This includes how we build homes. We need electricity in our homes, but at times, it can prove to be dangerous. Because of this, we are constantly learning new ways of making electricity in the home a little safer. New guidelines and updated code requirements are designed to make homes safer, but older homes that were built more than 30 years ago are still using outdated wiring methods. An electrician in Beverly Hills can help you determine what kind of wiring is in your home and whether or not it is outdated and in need of updating. You can rely on The Electric Connection to tell you what you need in order to make your electrical wiring as safe as possible.

An initial inspection will need to be done to verify the condition of the home’s wiring. There is a chance it has been updated at some point. One of the biggest hazards that may be lurking behind your walls is cloth-insulated wiring. This is typical in homes built before 1950. The cloth breaks down over time and leaves wires bare and prone to electrical fires. If this is the case and the cloth insulating the wires has become brittle, it is important to have the home rewired.

Beverly Hills electrical codes do not typically require homes with outdated wiring to be redone, but it can save you a great deal of money on your homeowner’s insurance as well as give you peace of mind that your home is not a fire risk. If you are not sure about the status of your current electrical wiring, call for an inspection. An electrician, like those at The Electric Connection, can give you the details you need to make an informed decision about what to do.