Cost, energy savings, maintenance and aesthetics must all be taken into account to optimize your budget and bring out the best in your home with the finest lighting design.

1.   Fluorescent and CFL (compact fluorescent) lamps work well in areas that require cooler, energy-efficient general illumination, such as undercabinet lighting and cove lighting in kitchens or flush-mount ceiling fixtures in garages and basements.

2.  Low-voltage halogen lamps are best for accent lighting and to provide luxurious illumination in areas of the home that call for a more up-scaled look, such as living rooms, bedrooms, dining rooms and master bathrooms.

3.  For task lighting, choose LED (light-emitting diode) desk lamps, reading lamps, track lighting and mini-pendants. Bulbrite’s Generation 3 dimmable LED lamps provide great color rendering and light output, perfect for track and recessed fixtures. 

 4.  LED lamps are becoming the standard for outdoor lighting, too, due to their low-maintenance and high energy-efficiency. Although the initial cost for LED lamps is considerably higher, you will find tremendous long-term savings in energy, maintenance and replacement costs—especially in areas where illumination is frequently needed such as outdoor security lighting.

5.  Incandescent lamps are still popular for portable lighting and ceiling fixtures to provide pleasant general illumination.  Aim for energy-efficient incandescent:  Bulbrite’s Eco-Friendly Halogen A19 standard bulb is energy-saving, fully dimmable and available in clear or soft white.

Note:  Do not skimp and buy bulbs of lesser quality, because substandard bulbs may emit a poor quality of light and may burn out prematurely.  Purchase your lighting from a reputable dealer who will stand behind the quality of their merchandise.

For more information on updating your home with quality, energy-efficient lighting, visit a Capitol Lighting showroom and meet with a professional lighting consultant.

The electrical system in your home is its most vital component, more so than its gas and plumbing. Without electricity, most basic tasks during the day are impossible—and they become worse than impossible at night. If you have an electrical system that is suffering from repair needs, you can’t wait for a full power loss before calling for repairs. Watch for the warning indicators listed below that will tell you to contact a licensed and experienced electrician immediately.

Call us for these services or for electrical system repairs in Mill Creek, WA.

As lighting technology has advanced, one of the clear front-runners in long lasting, energy efficient lighting is the LED light. With uses ranging from interior lighting to landscape lighting, there are many reasons why you should switch your home lighting over to LED. Because LEDs are being manufactured in many of the same form factors that you are familiar with, you have the option of calling a Burbank electrician such as The Electric Connection to help you switch out the majority of them if you feel it’s too overwhelming of a job, or you could take it on by yourself. If your lighting project is more extensive than changing out a few light bulbs, and you plan on installing recessed lighting or new fixtures, you should definitely look into having the work done by a professional electrician in Burbank.

Benefits of LED Lights

The most publicized benefit of using LED lights for most lighting applications is the extremely low energy usage and long lifespan. This benefit is seen best when compared by an electrician in Burbank CA with other light bulb technologies. A standard incandescent bulb has a lifespan of around 1,000 hours, a compact fluorescent has a lifespan of around 8,000 hours and an LED has a lifespan of nearly 30,000 hours. This is a huge increase, meaning that you will have to change your bulbs much less frequently than before. Furthermore, LED light bulbs are mercury free, unlike compact fluorescents.

In regards to energy efficiency, LEDs are also way ahead of the pack. As a result of the low energy required to run an LED bulb, there is also much less heat required. This leads to lights that are cool to the touch, making them much safer for many applications. When asked about power consumption, an electrician in Burbank will tell you that LED bulbs use much less than any other currently on the market. For example, a 40-watt incandescent bulb burns just as bright as an 8-12 watt compact fluorescent or a 4-5 watt LED. By switching from incandescent to LED, you’re only using about 10% of your previous energy. This can make a huge difference, considering that lighting can make up almost 25% of any home energy budget!

Choosing an LED

When choosing an LED, there are many factors to be taken into consideration. If your home lighting project is extensive, think about doing a quick Internet search for electrician Burbank and then find one that you can trust such as The Electric Connection. Working with an electrical contractor on this type of project is very much like having ceiling fans installed, outlets replaced, bath fans installed or having new switches or lighting dimmers installed. A licensed Burbank Electrician such as The Electric Connection will be able to explain everything that needs to be done in order for your custom lighting job to be done well. If you are just looking to replace some of the bulbs in fixtures around your home, there are just be a few things that you should know.

To make things simple, most packages rate their light bulbs with both actual watts, and watts relative to an incandescent. This means that if you are using a 45-watt incandescent, you should be able to find a 3W LED with packaging that lets you know that they are equivalent. If these comparisons are not listed on the box, there should also be a lumen rating. If necessary, you can compare the lumens between types of light bulbs. When choosing light bulbs for your fixtures, you will most likely be shopping for diffused bulbs. These bulbs look very similar to a standard fluorescent bulb, and help to diffuse the light. This gives the light a more natural feel. Other types of lights include outdoor landscape lights, such as floods and interior spotlights for more focused light concentration. Regardless of what type of lighting you choose, your licensed electrician Burbank CA can always help you with any questions that you might have. Enjoy your new lighting!

Visit our company profile.

The type of in-wall wiring and cables you choose for your home will largely depend on what kind of signal you need to carry, where you’re going to route the wire, and how far the signal will have to travel between your various peripherals. Whatever type of wiring you choose to go with, you want to be sure you get one that’s rated for in-wall use by the Underwriters Laboratory (UL). This is usually going to be indicated with a CL2 or CL3 rating when it comes to speaker wire and audio/video cables. A good number of Ethernet cables are rated for in-wall use as well, usually indicated with a CM, CMR, or CMP rating. When choosing the right rating for each specific type of wiring, the UL looks at a range of different factors, including the heat being generated from current flowing through the wire, how quickly the cable will catch and spread fire when exposed to flame, and the wire’s vulnerability to damage from external stresses.

It is also important to look for a cable that’s rated for your specific needs. For instance, you are going to want cable that is rated as CL2P or CL3P if you are planning to run it in your heating ducts, or if you are looking to run your cable underground to connect to your outdoor speakers, you will want to make sure your cable is rated for direct burial. It should also be noted that when you are making the decision of what custom wiring you will need for your home, you need to be aware of your local fire codes and make your selections accordingly.

When you are looking for the right type of speaker wire for your home, there are two things you need to factor into your decision: the gauge and number of conductors. The gauge of wiring you choose should depend on how far the wire is going to have to travel from the receiver to the speaker. Significant power loss can occur over long runs of wiring, reducing your system’s performance. This might not be a significant issue in a single-room setup, but it is something to keep in mind if you are looking at a multi-room system. In terms of conductors, speaker cable comes with two or four. Two should be all you need for wiring a single speaker, but if you are looking at doing a multi-room setup, or a system with volume controls, you will mostly likely want four.

No home wiring setup would be complete without a solid Ethernet setup, but knowing which type of wiring to use can be a little confusing. When you are looking to create a wired computer network in your home, or carrying audio/video and control signals all across the home, CAT-5 cables have been the standard for a long time, but a better option these days might be to look at CAT-5e or CAT-6 cables. These newer cables are able to pass more data along the wire at a much faster rate than the older wires. The CAT-5e and CAT-6 wiring options are also backwards compatible with devices that were designed to work with the older CAT-5 wiring, meaning you won’t have to buy all new equipment. Ethernet cabling actually stands up to interference better than almost all audio/visual cables, which is a large reason it has become so popular in recent years for whole-house audio/video systems. It can also be a more cost-effective option to run long lengths of Ethernet cabling than it can be to run the same length in audio/video cable.