DIY, or Do-It-Yourself, repairs and renovations are a common response to many home needs or emergency situations. It can be time-saving to begin a job immediately, could cut down on the costs of hiring a professional, or may just be an opportunity for homeowners to develop a skill or work on a hobby without calling a professional.

Certain areas of home repair and improvement, like plumbing and gas fixes, should be left to professionals. Electricians especially should be called in to oversee or complete repairs and renovations, as they know the laws, have built relationships with the local utilities, and have specialized training and expertise in the field.

Why You Shouldn’t DIY Electrical Work

DIY might work for small repairs in cases of electrical work, but since these issues deal with live wires and active electricity, it would be best to be safe and call in a professional in most cases. Electricians have specialized training and access to the tools necessary to safely and effectively make repairs and renovations to electricity. The result of DYI gone wrong with electrical work can be fires, electrocution or even death, so the margin for error is slim.

Electricians know how to test wires for power and turn power on and off safely before and after they have worked. While most homeowners know to test switches against breakers, few have voltage meters and insulated tools to protect themselves while working. When replacing circuits, rewiring a new space, or renovating old systems, most communities have codes and require permits for extensive work to oversee that is it done safely and in accordance with local law. In these instances, it’s best to call an electrician.

DIY work stops being time and cost-effective when it puts a homeowner and his or her family and property in danger. There are times when a professional electrician should be called in to help.

Outlets are wired into your home to make it convenient to plug in anything from an appliance to a lamp. However, an electrical fault can occur endangering your home. It’s not a good idea to have 19 different appliances plugged into a single outlet. This can cause a short; not to mention the maze of cords running through the room aren’t safe for family and pets.

Sometimes electrical faults in your system can cause a ceiling light or fan to stop working. After identifying that a bad bulb is not the culprit, you should turn off the power and inspect the light fixture itself. Check the cable and flex connections and make sure the terminal screws are tight. Use a continuity tester to make sure the flex hasn’t gone bad requiring a replacement.

Lights, fans, and other fixtures can also stop working because a residual current device has tripped. You can reset the device but if it trips again it’s best to call in a certified electrician.

If you are still experiencing problems after doing these simple troubleshooting tasks, it’s always best to call in a trained electrician. Outlets or lights that are malfunctioning could be caused by exposed wires somewhere in your electrical system. If your circuit breaker continually trips, it means the current in your home is not cycling as it’s intended. Either way, it’s much safer to have these issues repaired by a good electrician.

The search for commercial lighting systems can be confusing, misleading, and overwhelming at times. With all of the different terms, labels, and technologies being used how can anyone expect you to make any decisions with all of that going on?

Well, this post is going to at least relieve your confusion about DesignLights Consortium vs EnergyStar approved and qualified lighting products. There is a difference, and you need to be well aware of what it is when you are looking into a new lighting system for commercial Click here to read it, then come back to finish the rest (opens in a new window)!

The major difference between DLC and EnergyStar is that DLC is only for commercial lighting products while EnergyStar is more focused on residential purposes and applications, with a minor hint of commercial lighting in there as well. This makes DLC the more “go to” organization when it comes to commercial lighting qualifications as they are seen as the experts on commercial lighting products and technologies.

Anyways, when it comes to becoming EnergyStar qualified for a lighting product, a product needs to pass these (along with others) guidelines to be able to be EnergyStar qualified:

Conclusion

After this quick, simple, and brief overview of the differences between EnergyStar and DLC; we hope you’ve found some light on the topic (get it, light).

In a general sense, most of your commercial lighting purchases will include DLC qualified products, especially when buying for warehouses, factories, parking lots, street lights, and the like all except for those listed.

Are you confused on any point? Have any comments or questions? Comment them below and we will surely find an answer or response!