Faulty electrical wiring does not only cause fires but could also result in electrocution if you touch an exposed wire. When unconcealed wires come into contact with combustible materials, they can easily cause fatal fires. You can prevent many deaths caused by faulty electrical wiring by learning some signs of faulty electrical wiring. The main signs include:

It is true that most of the electrical problems you have in your home will need to be taken care of by a licensed electrician. However, there are various smaller problems that you can easily and safely troubleshoot. Here are just a few:

This can be quite bothersome and yet pretty easy to troubleshoot. Begin by checking that the bulb has been screwed in correctly. It needs to be in all the way. If that is in order, check to see that the wattage is correct for the fixture in which it has been fixed. If the wattage is not right, that can be causing overheating and it can even lead to a fire. In the event that the wattage is correct, just replace the old bulb with a new one. If the light is still flickering, then it is possible that the electrical outlet or the cord has a problem.

Air flow is obviously a very big part of forced air systems. Without air flow, the entire system doesn’t work. It’s just producing heat and not sending it anywhere. It is precisely that issue that can cause a great deal of damage to your heating system. There are a couple of different ways that your heating system can be prevented from circulating air, but we’re going to focus on one: the air filter. Let’s take a look at what the air filter does, and how it can create air flow issues that lead to call FB Electrical Services. We provide heating repair throughout Boston.

Electrical wiring is one of those things you don’t really think about. It is tucked away nicely behind your walls and is not really one of those things that comes up in normal conversation. You flip a switch you have light, you plug in your phone charger and it works. What more is there to think about? An electrician in Glendale will tell you there is a lot more to think about and be concerned about if your home was built before the 1950s. The team at The Electric Connection has seen it before and has helped other customers bring their homes up to date by upgrading their old wiring.

Old wiring may not seem like an issue until you get behind those walls. When you see how frail it is and the risk is poses to your home, you will see why other owners of older homes have taken the plunge and upgraded their electrical systems. Old wiring that was insulated with cloth was safe then, but by today’s standards, it is a fire waiting to happen. The cloth becomes brittle and falls apart, leaving the wires exposed. One touch of those wires is all it takes to create a spark that will ignite the insulation in the walls explains a Glendale electrician.

Old wiring typically means outdated electric panels as well. You have probably noticed your home doesn’t seem to accommodate as much as the neighbor’s newer home when it comes to plugging things in. You probably cannot run the microwave and the toaster at the same time or run the vacuum if you are making coffee. This can be explained by your electrician. Glendale homes built 60 years ago were not built to accommodate the many electrical appliances that we use in today’s world. If you are concerned about your home’s wiring, give The Electric Connection a call today and schedule an inspection.

This problem is similar to the heating appliance issue we started with.  Overloaded outlets are more than just a circuit-tripping annoyance, they can also become a danger quickly!  If you’re electrical panel is doing its job properly, the circuit breaker will trip before there’s a problem, but relying on a safety measure is not a safe practice.

Overloaded outlets are simply circuits that have too many things plugged into them.  This can happen by:

All of these practices can overload your outlets by putting too much demand on the circuit.  In a best case scenario, the circuit breaker trips.  The worst case leads to excess heat at the outlet, melting plugs and sockets or excess heat on the circuit which melts insulation from wiring in the walls, leading to a house fire.

Of course, even if you follow all of these protections, things can happen that are outside of your control.  That’s when your best defense is a strong safety net.  Early detection and warning for house fires is the best way to survive in an emergency.  The sooner you’re aware that there is a fire, the higher your likelihood of survival.  For the best defense: