Whenever you have a short circuit, it means that there was an accidental path created in your existing circuit, which generated a connection that was not there before the short occurred. Electricity will always follow the path of least resistance, which means that it will almost always follow this new path, rather than its intended path. This typically results in an abnormally high level of electrical current. The most common type of short is when two bare wires cross, such as when old insulation deteriorates, causing a loose connection which allows two wires to touch.

An electrical short is not something to take lightly. This increased current generates a great amount of heat, which can lead to sparks and fire. One way to identify an electrical short is by hearing a popping sound whenever that particular circuit is turned on. This is the sound of the electricity taking the path along the new connection that it has found, causing the circuit to experience a sudden overload. Smoke, flames and melting fixtures can follow, leading to larger fires and risk of shock in the immediate vicinity.

Another common source of electrical shorts is improper wiring. This can occur if the metal lining of a particular switch or outlet touches one of the wires. An electrician in Burbank must always find and fix shorts caused by damage, such as storm damage.

The most important thing to do whenever you have a short is to address it immediately. Because of the potential severity of this situation, call an electrician right away to have them inspect and fix the problem for you. A short left unrepaired can lead to more extensive damage, resulting in a much higher cost than if you had fixed the problem whenever it was first detected. For more information on electrical troubleshooting and our services, visit our main page (Click Here).

Do you find energy conservation confusing? You're not alone. According to a recent study, Americans are by-and-large misinformed about what household appliances consume the most electricity. As a result, homeowners who wish to cut down on the energy they use in their home electrical work might find themselves spending time and resources to improve efficiency in areas where they won't see big gains. Read on to learn more about where most of our energy goes and how you can get the biggest payback for your conservation efforts.

The Failings of Cognitive Accessibility

In general, Americans tend to overestimate the amount of power that is devoted to common home devices like computers, television and lighting, while underestimating the amount of energy that is consumed by bigger ticket items like heat, air conditioning and hot water heating. That's because we confuse the amount of time we spend actively using a specific device with how much power it uses.

“Consumers tend to use the frequency with which they think or interact with a given energy source as a proxy for its consumption,” Ohio State University psychology doctoral student Dan Schley, lead author of the study, said to the Washington Post. For example, someone who spends eight hours a day working on a computer might naturally be inclined to think that device is what's driving up the electricity bill.

How to Make Your Actions Count

However, it turns out that the energy consumed by common electronics is dwarfed by what goes into major appliances. According to the U.S. Department of Energy, a whopping 48 percent of energy in the average home goes toward heating and air conditioning. The hot water heater takes the next largest individual chunk, at 17.7 percent. The refrigerator uses 13.7 percent, with all other appliances and electronics accounting for about 21 percent of the total.

The upshot? If you really want to cut back on consumption in your home electrical work, you need to target the biggest guzzlers. That means making interventions like installing smart thermostats, turning down your water heater temperature and beefing up the insulation in your home. The simplest, most effective change that most families can make is to bump the thermostat down a few degrees in the winter and up a few degrees in the summer.

Don't Neglect the Small Stuff

That's not to say you should ignore simple behavioral changes that can save money in other areas of your home electrical work – things like unplugging devices when they aren't in use, installing energy efficient cable boxes, using the power-saving settings on your computer and turning off the lights when you aren't in the room. Just treat these items as the appetizers and desserts of your energy-saving strategy, rather than the main course.

If you need help identifying the largest loads on your home electrical work, arrange for a visit from an expert electrician today.

A good number of the calls I get during an average day at work fall into two categories;   customers who call to have something installed in their electrical system, and customers who tried to install it themselves and are calling me to come and fix the mistakes they made.  There’s certainly nothing wrong with trying to perform basic electrical work yourself if you have a good grasp on proper electrical safety techniques and what you’re doing.  On the other hand, there’s nothing wrong with calling a top Dallas electrician to do the work for you either.  The best way to ensure the job is done right every time is to hire an honest, hardworking professional electrician who’ll stand behind his work.

Even tasks that can seem quite simple can be treacherous if you’re not sure what you’re doing.  This comes into play a lot when a homeowner is trying to perform a three-way switch installation.  It seems a lot easier to install than it really is; I generally recommend homeowners not attempt to install three-way switches without at least a electrician on the phone to walk you through the process.  Keep the following in mind:

There are tasks well suited for the do-it-yourself minded homeowner, though.  The easiest is wall outlet replacement, which is usually a very simple, straightforward procedure.   That doesn’t mean the haystack isn’t free of the odd needle that you can hurt yourself on, though.  Here are some of the more common problems I run into, along with some typical solutions or hints to keep them from happening to you: 

By Clarissa Allison | January 6th, 2017

A new year is the perfect opportunity to achieve balance at work and at home. Many of us have big plans for 2017, and making aesthetic and practical changes to our surroundings can kick start a positive influence that lasts throughout the year. One of the ways to refresh our environment is to experiment with new lighting options in our decor choices. Read on for lighting suggestions that will keep you on trend as well as helping with energy savings!

Arc and Tripod Floor Lamps

Lighting fixtures as main focal points  and statement pieces are what’s happening now. Modern and sleek designs that that take center stage can transform an entire space. Floor lamps in unexpected silhouettes such as arcing designs, and with clean details like linen shades add a fun dimension to dark metals. Highly stylized but simple floor lamps have returned as an important design element, and arcing floor lamps complement your reading nook or living room perfectly. Likewise, tripod floor lamps offer the mid-century appeal created by the sophisticated Scandinavian designs of the 1960′s.

Industrial Lighting Fixtures

 Jewel Toned Accents

Last year, decorating in pastel shades of pink and blue were a common sight in contemporary homes, but jewel tones are now what’s in demand going forward. Look for lighting fixtures in berry hues with accents like scroll-work, chrome or rounded details. Even a lampshade in a rich tone conveys a warmth and romantic element to your surroundings. The best part? You don’t have to purchase large, expensive pieces to achieve this look. Simply add a couple of pretty table lamps to a sofa table to set the baseline for your living room’s theme.

Smart Home Lighting

A common concern for those involved in home renovations or purchasing a new home is, “What is the state of the electrical system in the walls”. Some homes may not have had construction or renovations done since the original – this means the original wiring is still in place. Having original wiring in place can be concerning, especially if it is aluminum wiring. This type of wiring is commonly found in older homes and can be very dangerous. Read on to find out what you need to know about aluminum wiring and the dangers associated with it.

In the 1950’s to 1970’s, many homes were being outfitted with aluminum wiring. The reason for this was because the prices of copper (material normally used for electrical wires) had increased and the use of aluminum would undercut the high costs. Aluminum is also much more conductive than copper and was used in larger industrial/commercial electrical lines like power grids and airplanes.

Despite the reduced cost and increased conductivity, aluminum wiring has many potential issues. Aluminum wiring is much softer than standard copper wiring. This means that it is vulnerable to being broken, cut, and damaged which can leave live electrical wires exposed. Another issue is that when aluminum rusts, it is not as conductive as copper. Copper that rusts can remain conductive and continue its flow of power. However with aluminum wiring, rust in wiring will impede the flow of electricity and can cause a number of other issues. Aluminum also expands and contracts when it becomes hot. This constant flux in size will result in the wires loosening themselves and connections become loose. For all of the above listed reasons, aluminum is prone to overheating and electrical fires.

If you are unsure if there is aluminum wiring in your home, we have listed a number of warning signs that can indicate a hidden problem