A properly sized and decoratively coordinated entryway foyer fixture provides an opulent and brilliant introduction with just the right lighting effects.

 Even if your home is not made of glass, fine lighting shines through more than any other home accessory or decorative feature.  An attractive foyer fixture creates a welcoming atmosphere, while emitting generous ambient light for greeting guests safely into your home.

It is important to size and install your foyer lantern properly to make the most of your lighting composition.

To determine how big your foyer lantern should be, you must know your ceiling height. The overall height of a foyer fixture should allow for a clearance of at least 7 feet from the floor.

In a two-story foyer, if there is a picture window above the front door, center the foyer lantern so it can be seen from outside. If the foyer is extra-large, wall sconces make a nice accompaniment to add depth and supply additional illumination.

The latest lighting trends feature oversized fixtures.  Make a grand statement with a large foyer lantern for superb upscale illumination.  Foyer lanterns from Savoy House Lighting are captivating and superbly crafted, featuring original style, timeless elegance, and designer authenticity.

With an elite team of designers, Savoy House continues to create sophisticated award-winning light fixtures. Artistic innovations include works by Karyl Pierce Paxton, Raymond Waites and Brian Thomas—artists who command attention and brilliantly define the next generation in home illumination and décor.

The design team at Savoy House has propelled home lighting and décor to new heights by creating and defining light fixture fashions and novel lighting compositions for over 46 years.

Check out the latest collections to revamp your home entryway and welcome the Summer Season.

Trends may come and go, but fine quality and classic finishes endure throughout the ages. Keep in fashion with the latest in home lighting and accessories.  Look to Savoy House when renovating or updating your home lighting design for light fixtures, lamps and decorative accessories that are steadfast, strong and enduringly beautiful.

Recently, the Obama administration adopted a new gas mileage standard for cars made in America — 54.5 mpg by 2030. That’s a big jump. The most recent figures — 2009 — show that average gas mileage for American cars manufactured in that year was 33 mpg.

Well, the new standard is good for reducing dependence on foreign oil and good for our pocket books — it’s supposed to save us $45 billion annually at the gas pumps. It’s probably also good for American competitiveness in export sales — people in other countries seem even more concerned about gas mileage than we have become. The 2009 cars we imported got 35 mpg, 2 miles better than American-made.

Most Americans support the idea of upping gas mileage. Consumer Reports found in a recent survey that 77% of Americans feel that Detroit should produce more fuel-efficient cars and the government should increase mileage standards. So, everything’s good….

BUT wouldn’t it be better to run our cars on ZERO gasoline? Wouldn’t it be better to go electric? I’m not talking about the government telling Detroit to manufacture only electric vehicles (EVs). But when we buy our next car, if we made it electric or hybrid, we would be asking Detroit to manufacture the kind of cars that emit zero pollution and don’t eat any Middle Eastern oil.

You might be thinking — yes, but where does the electricity come from? That’s a good point, but here’s the neat thing about electricity — it can come from clean sources. In Los Angeles, 40% of the electricity supplied by the Department of Water and Power is generated from coal — not clean. But that means that 60% is generated from cleaner sources like natural gas, hydropower, nuclear, geothermal, wind, and solar. DWP expects that by 2020, 0% will be generated from coal and 40% will be generated from renewables. Those are the facts about electricity in L.A. — and, I assure you, my being an electrician doesn’t give me any bias on the subject!

My next car will be an EV. In the meantime I’m lending my support to the cause by installing EV chargers for those in L.A. who are beating me to it and have already bought their electric cars.

Click here to read more.

Have you ever been busy in one part of your house and really needed to get talk to someone at your front door, in the kitchen or out in the garage? If that sounds like something that happens to you often, an intercom system may be the perfect solution. This is a project an electrician in Glendale can easily tackle for you, saving you the time and hassle of doing it yourself. Learn more about what intercom installation entails and give Electric Connection a call today.

First, when installing an intercom system, you must figure out what rooms in your home you may want to connect to the system. Generally, you will have a speaker at the front door and a place in your home you spend a significant amount of time—perhaps the kitchen. However, you may want additional receivers in the bedrooms or basement.

Each receiver you install will require both wiring and construction work to enable it to work correctly and look good. The most difficult part for many is installing it into the wiring of the home. This will involve working with the circuits and tapping into the wiring already in your walls. The construction aspect is tricky too—unless you know how to work with drywall, plaster or whatever substance of which the wall is constructed.

Finally, there are many different types of intercom systems, from basic to systems complex enough for large corporations. If you are unsure which one will work best for you, this is another reason to work with Electric Connection, the electrician Glendale residents trust. Give us a call today and we will be happy to discuss your needs for an intercom system today. Our team of experts can get started and have your home and family more connected than ever before.

Add the perfect custom finish to the front of your home with outdoor hanging lanterns and wall lanterns.

When using two outdoor lanterns, they should measure about 1/4 the height of the front door(s). When you are using only one lanterns, 1/3 of your door height is appropriate.

Outdoor hanging lanterns should be centered over your front door(s), high enough so that the doors may open and close freely. If you have a picture window or archway above the front door, center the fixture so that it may be seen from inside your home.

Wall lanterns surrounding the front doors should be proportional to your home, when in doubt, size up! Remember, fixtures appear smaller from curbside viewing than most people would imagine.

Wall lanterns are also appropriate for rear and side entrances and by garage doors – same rule of thumb for sizing applies for these areas.

Path Lighting should be placed 6′ apart to ensure adequate beam spread.

Be sure to make your space functional! Task lighting is an important piece of the design; it will provide guidance and illumination in the necessary areas to ensure safety.

Focused illumination on key holes and security pads allows for easy access when you are entering and leaving your home at night. Outdoor LED wall lights or recessed spotlights work well in these areas.

Add path lighting to walkways every 6’ to provide adequate beam spread. This will create curb appeal ambiance and visibility when walking at night. Don’t forget to add light near the house numbers – this can help in emergency situations and for deliveries!

After the sun goes down be sure your home has the same curb appeal as it does during the daytime by adding outdoor and uplighting to the landscape.

Illuminating trees or other elements from below will create soft focal points in the landscaping after the sun goes down. Use a flashlight to test where you’d like the light to hit, then mount the fixtures accordingly. Be sure to mount fixtures out of grass for ease of mowing and other landscaping tasks.

Be sure to view your outdoor lighting after dark before signing off on a project; it’s easy to make necessary adjustments to refine your outdoor lighting design.

To avoid being “that neighbor”, be sure to eliminate glare and make sure your outdoor light fixtures do not create “light trespass” into your neighbor’s property.