Now is the time to evaluate your outdoor and landscape lighting needs in preparation for the summer season.  Follow our step-by-step landscape lighting design plan and get the job done right.

Learn how to get luxurious landscape lighting effects and make your home shine by Memorial Day 2014…

Step One:  Review the perimeters of your home, including surrounding outdoor property—front yards, back yards, side yards—to see which features you would like to accentuate, such as fountains, sculpture, or flower boxes. Choose a few areas that will stand out and add a luxurious element to your home at night.

Step Two:  Scout out areas where you will need security lighting—leading up to and at all home entryways.  Take note of areas where path lighting, step lighting, and task lighting are needed.

LED strip lighting under steps, railings and benches provides excellent security lighting and may be custom-tailored to your decor. LED light strips are especially suitable for outdoor areas, as they are long-lasting and extremely durable, radiate very little heat, and use up to 80 percent less electricity than standard light sources.

Step Three:  If you have existing outdoor lighting—review your property at night to see where you can upgrade your lighting design.  Check that everything is in working order and adequate illumination is provided at all significant locations.

• Where there are large areas blanketed in darkness, consider installing a floodlight equipped with energy-efficient lamps and lighting controls.

• Equally important is to check for areas that are excessively bright. Overly bright outdoor lighting, including path lighting and patio lighting, creates glare and can actually make it harder to see at night and diminish safety and security.

Your landscape lighting should be soothing and comfortable.  Make sure that  landscape and outdoor fixtures do not cast light into your neighbors’ property.  Keep “light trespass” from invading your own home at night.

Step Four:  If you like to entertain outdoors—see that your property is safely lit for guests—pay attention to elevation levels and unusual dips or risings; boundaries defining rock gardens, Koi ponds, and small shrubs should be clearly visible.  Make sure you have enough ambient illumination for safe navigation, as well as sufficient task lighting for cooking and food preparation.

Step Five:  Lighting techniques, such as shadowing, silhouetting and cross lighting add artistry and depth to your landscape at night.  But do not overdo it.  Depending on the size of your property, select one to three key areas that will expand and complement your overall landscape lighting presentation.

• Conceal lights behind and below a statue or small tree to highlight form and create definition.

• Show off a sculpted garden,  a textured rock wall or a unique architectural feature of your home that will stand out at night.

Light responsibly.  Keep an eye on the safety.  Having top-quality outdoor lighting makes for the best “Neighborhood Watch Program.”

Light conservatively.  The most wonderful aspect of outdoor and landscape lighting is that you only need a few well-chosen light sources to deliver a great deal of illumination and an overall luxuriant feel to your home.  Compared to other home improvement projects, top quality landscape lighting adds substantially to the value of your property.

Light efficiently.  You will save money in the long run, if you invest in automated lighting systems and LED landscape lighting now.  For maintenance-free, durable, long-lasting illumination—buy your LED landscape lighting and automated control systems from a reputable dealer.

Top-quality LED landscape lighting fixture are built to last with finishes guaranteed to withstand harsh weather conditions; many come with life-time product warranties.

Find qualified lighting professionals and electricians.  Professional lighting consultants will help you design your landscape lighting to exact specifications with outdoor fixtures that are UL-listed for outdoor use; electricians, familiar with updated LED lighting systems, should be licensed and aware of current electrical codes and ordinances in your town or city.

Order your fixtures early, set the job up now with energy-efficient security lighting and luxurious landscape illumination to ensure you will be ready for summer holiday celebrations.

THE SEASON’S TOP PICS:

Crystal chandeliers have come a long way from the days as traditional, stately pieces only enjoyed in the most formal of spaces and positioned to impress guests in the dining room or the foyer. Crystal’s are found in various lighting applications of all shapes and sizes and their sparkling, elegant affect is energizing areas of the home from powder room and office to kitchen and bath.

More crystal means more cleaning, but it does not have to be too taxing. A few simple guidelines will help to keep your crystal chandeliers looking their best.

How to clean it

If you do not wish to remove the crystal components from the piece, you can use a spray. After the piece is sprayed, wipe off the solution with white cotton gloves. Crystal chandelier manufacturer Schonbek recommends a solution of one part isopropyl alcohol to three parts distilled water, while Waterford’’s chief lighting designer Billy Canning says hot soapy water will do the trick. Both agree that special cleaning formulas aren’’t needed.

“A real no-no in the area of cleaning chandeliers: …If the chandelier is adorned with a traditional polished gold finish or polished silver finish but it i’s not stainless steel, people will use these sprays that you can buy,” says Eileen Schonbek Beer, Creative Director for Schonbek Worldwide Lighting. “Basically, what the manufacturers say is you spray the chandelier and let the stuff drip off, that cleans the crystal. But in fact what it does is ruin the frames of the chandelier.”

If more aggressive cleaning is needed, the crystal parts will need to be removed from the frame. The crystals can then be hand-washed in soapy water, rinsed clean and dried with a cloth. Schonbek provides trim diagrams that detail reassembly of the chandelier.

For dusting between cleanings, Schonbek recommends using a feather duster, lambswool duster or a make-up brush.

How often to clean it

In general, crystal should be cleaned every two to six months. The frequency of cleaning required depends on where it is used and how easy it is to get to the piece.  According to Canning, extremely large pieces like 20-foot chandeliers can get away with being cleaned only once a year.

Since crystal lighting is being featured in virtually every room of the house these days, some pieces may need more frequent cleanings based on their location. Chandeliers used in kitchens will need more detailed cleaning due to oil and grease buildup, as well as dust sticking to the components due to moisture from sinks and stoves.

“The beauty of crystal, of course, is the prismatic refraction of the light passing through the crystal ornament,” says Beer. “So the minute it’s got any kind of residue of dust or even moisture — like in moist climates in Florida — the humidity will cause dust to adhere to the crystal and the salt in the air will kind of make it cloudy. So you actually have to clean crystal pretty regularly.”

Maintaining a regular cleaning schedule for crystal will always keep it sparkling. Yet if a piece is neglected, all it takes is a little extra effort with the methods listed above to make it shine like new.

“In my personal experience, I have been asked by many auction houses to identify Waterford products many times,” says Canning. “In most cases the difficulty with identification would have been that the chandelier was allowed to get dirty and the crystal would appear dull. But in all cases, when properly cleaned, they can look as good as the day they were bought.”

For the Chore-Challenged

For customers who aren’t ready to get into the nitty gritty of cleaning their crystal by hand, suggest the Da Vinci chandelier from the Geometrix collection by Schonbek. The crystals stay attached to a stainless steel frame that can be placed directly in the dishwasher. The Da Vinci is available in a 10-inch or 36-inch diameter. The only Da Vinci that will not make it to the dishwasher is the dramatic 5-foot model.

Home maintenance can be overwhelming, especially when you don’t know where to start. Roofs that need re-shingling, carpets that have seen better days, that occasional leak you still have yet to place… there’s usually always something that needs fixing. Problems that are visible are usually easy to track and stop before the problem gets worse, but what if there’s an issue inside your walls?Outdated wiring is an issue all homeowners will eventually face. Homes that are at least 30 years old are likely to have outdated wiring not designed to operate with the modern homeowner’s lifestyle. Older homes with 60 amps can’t handle powering multiple appliances at once, not when the typical homeowner needs a house with at least 100 amps. It’s important to note that old wiring isn’t just an issue of inconvenience, but safety.