Spending time outdoors with friends and family is special. Whether you’re roasting marshmallows around a campfire or grilling hamburgers for a party, fun and laughter are sure to ensue. If you’re the kind of person who loves to spend time outdoors at night, make sure you have adequate outdoor lighting.

There are numerous benefits to outdoor lighting, apart from just brightening your space. You’ll add value to your home and be able to enjoy peace of mind. When you put all that work into making your home look like an architectural masterpiece, don’t let it disappear when nightfall comes.

With outdoor lighting, the possibilities are virtually endless. You can light walkways and driveways; you can implement zone lighting to highlight specific areas of your home; you can light up your deck, patio or pool; and you can install motion detector lights. No matter the location you choose to illuminate, rest assured it will add safety and security to your home. A well-lit landscape will help you feel safer at night and deter trespassers.

Whether you’re entertaining guests on your deck or patio or hanging out by the pool or hot tub, it’s important to have the right lighting to ensure the safety of you and your guests. The last thing you want is for someone to slip or trip and hurt themselves.

Even if having guests over isn’t your cup of tea, you’ll want to make sure you and your family are safe at night. Forgot something in your car? Waited until 10 p.m. to think about checking the mail? Ensure your pathway is properly lighted so that you don’t step on or near a critter or trip over a skateboard.

If you’re looking to enhance your curb appeal, outdoor lighting is the way to go. An illuminated home communicates to passersby that you care for your home, not to mention it’s warm and inviting. If positioned properly, you can highlight the best features of your home, such as your landscaping. When you put time and great effort into turning your landscaping into art, you want it seen at all hours, not just during the day!

No matter your reasoning for wanting to add outdoor lighting, rest assured a licensed electrician can help you choose the best lights for your needs and budget.

Winter is well on its way in the DMV area. So are you prepared for the worst-case scenario of a power outage? If not—you could be facing cold days and nights without power in the event of a severe winter storm! That means now is the time to start prepping your generator to make sure you’re ready for when the worst happens. It’s better to be safe than sorry!

For generator maintenance, contact the experts at Kolb Electric today!

With a few easy tips, you can make sure you have warmth and lighting all winter, regardless of the weather outside. For your generator, make sure you:

In addition to these checks you can do on your own, it’s important to have your standby generator inspected by an authorized sales and service dealer. Remember—many home and commercial generators have a limited warranty and require service from a licensed technician in order to make sure the warranty can be honored.

You wouldn’t just let any old person in your home, would you? Of course not! That same philosophy should apply when choosing an electrician.Our Texas electricians go through background checks, exams, and multiple interviews before joining the ElectricMan team.

We are a family owned electrical repair company in North Texas and we are available 24 hours a day to serve you!

When you have that next electrical emergency, it’s ElectricMan to the rescue!

About ElectricMan Inc.

ElectricMan Inc. is one of Dallas’ most trusted electricians. Nick Schaeffer, Mr. ElectricMan himself, has quite the resume for a master electrician. He started the company by himself in 2004 and hasn’t looked back since! For more information about Electricman’s list of electrical repair services, please visit www.ElectricManInc.com

Aluminum LED profile housings allow you to create customized light fixtures with LED strip lights. Our Klus brand LED channels are available in many different styles, including recessed-, or flexible, O-shaped, and more. Available in 1- and 2-meter lengths, the channels can be easily cut for any application from under-cabinet lighting and bookshelf lighting to showcase lighting and transition strip lighting. They’re available with a variety of lens options, such as clear, frosted, and etched that complete the profiles. We’ve put together a step-by-step guide for using these channels to create your own light fixtures. Please note that your specific channel might vary from the one used in this tutorial.

Materials needed:

1. With a pair of clippers, carefully clip through the clear plastic heat shrink as shown in figures A-C. You will want to take your time and be careful not to cut the strip’s wires while removing it.

2. Lay the LED strip into the channel, and position it along the bottom so that the ends of the strip and the channel are lined up (fig. A). Now, remove the paper from the strip’s adhesive backing (fig. B), and adhere the strip to the LED channel—starting at the lined end and working your way to the other end of the strip. Be sure to leave roughly 1/4-inch free at the end of the channel so that you can install the end cap as shown in figure C.

3. If one of your end caps doesn’t come with a pre-drilled hole, you will need to drill your own to allow the wires of the LED strip light to come through. In this case, we used a Dremel tool, but other options are viable as well. Regardless of the tool you choose, it is helpful to mark the end cap where you would like the wires to come through. Start the hole small, and increase the size as necessary.

4. Place the end cap on the wired side of the strip by threading the wires through the end cap as shown in figure A. Insert the end cap into the end of the light bar, and push firmly until it is fully in place (fig. B).

5. On the open end of the bar, slightly peel up the end of the LED strip (fig. A); this is necessary to install the end cap. Now measure your channel lens, and trim off the excess with clippers (fig. B). Be careful when trimming to avoid cracking the plastic. Excess material can be lightly sanded off. Once the lens has been cut to the proper length, slide it into the channel, and install the end cap as shown in figures C and D.

6. That’s it! Your customized LED light fixture is complete and ready for installation, which we will cover in the next step.

7. Mounting this LED profile is as easy as applying double-sided tape to the back of it and sticking it to your intended surface. Be sure to cut the tape to fit the back of the LED profile and to leave the tape backing on the side not attached to the channel until you are ready to mount it.

For most LED profiles, mounting clips are available for a more permanent installation.

If you have questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.