Fun Fact: His obsession with a chandelier led Italian astronomer, mathematician and physicist, Galileo to discover the law of pendulum motion.

While, we cannot guarantee that you will understand the laws of physics, we can guarantee that you will be captivated by the brilliance of a chandelier.

More than ever, we are experimenting with home lighting design to display our individuality, and nothing conveys unique style more than a fabulous chandelier.

Professional lighting consultants at Capitol Lighting can help you to illuminate your sense of style and find the perfect chandelier(s) to complete your decorative interior design.  A few simple laws of lighting and trusting your own good taste will get you there…

Chandelier Application and Design Tips from Capitol Lighting

Outstanding Applications:  From powder rooms to dining rooms, the chandelier enhances the appeal of your home environment. Chosen above all else for their aesthetic rewards, chandeliers also provide needed general ambient illumination.

Power in Proportion: To enjoy the full benefits of a chandelier, you must choose a fixture that is the correct size.  A chandelier that is too big will overpower; one that is too small will look out of place.  Finding the right chandelier size is easy:  Add the length and width of the room in feet, and then convert that number to inches (i.e. a room that is 12 feet by 16 feet would require a chandelier that is approximately 28 inches wide). When in doubt between available chandelier sizes, size up to achieve a more balanced presentation.

Special Considerations for Over Dining Tables:  When hanging a chandelier over a dining table, the total chandelier width should be about a foot smaller than the table width to allow approximately a 6-inch clearance for those seated around the table.

The Long and Short of It:  Over a dining table, the bottom of the chandelier should hang about 30 inches over the tabletop. The height of the fixture should measure about three inches for each foot of ceiling height, so for standard 8 foot ceilings choose a chandelier with an approximate height of 24 inches.

In a one-story foyer or in rooms with standard 8-foot ceilings, a chandelier should hang no less than 7 feet from the floor.  In a two-story foyer or in rooms with higher ceilings, the chandelier should hang approximately 8-10 feet from the floor. If your foyer fixture is to be viewed through a picture window, select a chandelier that will fill this space and center the fixture accordingly.  Note:  A two or three-tiered chandelier works best for rooms with higher ceilings.

Installation Awareness:  Be sure to employ a qualified electrician and follow National Electrical codes when installing fixtures.  It is especially important to consider the proper mounting procedures for hanging a heavier chandelier.  Usually fixtures weighing 50 pounds or more must be secured to the home’s permanent structure.

Maintaining the Glamour:  Keeping your chandelier in pristine condition requires proper cleaning and attention to specific instructions pertaining to certain finishes.  Generally, crystal and glass elements are kept clean with a basic soap and water combination.  Nonabrasive cleansers for most finishes are required.  Drying fixture components completely will help protect their luster.

Best Accessories:  Ceiling medallions, chandelier shades, decorative chain and cord covers may add to the ambience of the chandelier.  These items may be special ordered to give your chandelier a unique flair.

Imperative Additions:  Be sure to use the correct bulbs for your chandelier.  Where you have a choice between frosted or clear, choose the bulb that goes best with the fixtures finish.  Always employ dimmer controls with your chandelier.

Get High and Mighty with a Mini: The mini chandelier has become an increasingly popular lighting fixture around the home due to the versatility of its small size. Many designers are opting for mini chandeliers, rather than pendant or island lights, over long dining room tables and kitchen islands. Mini chandeliers are also gracing powder rooms and master bathrooms, as well as bedside tables.

Accent the Positive:  Although the chandelier should be the main lighting attraction, low-voltage spot lights, a matching torchiere floor lamp, +/or coordinating wall sconces make great designing additions to supplement lighting needs and complete the room’s décor.

The lighting experts at Capitol guarantee that you will captivate guests and enjoy your home to the fullest with the most illuminating fashions in home lighting and accessories.  Capitol Lighting’s lighting consultants can help you find the perfect chandelier for your home and give you tips on hanging a chandelier.

A recent study conducted by the National Association of Home Builders (NAHB) found that homes constructed within the past decade are significantly less expensive to maintain than properties that were built a generation ago. On average, the combined annual maintenance and utility costs of a home that was built in or after 2008 is roughly $241, while the same yearly price to live in a home built before 1960 is $564 a year. There is also a noticeable variance in the average operating costs of houses built during these two periods - properties constructed more recently only have operating costs of roughly 3 percent while those built before 1960 averaged 5 percent.

A large factor is the kind of plumbing, wiring and overall utility setup of a given property. Over the past several decades, streamlined construction methods and an overall "greener" sensibility among shoppers have led to the development of more energy conservative appliances and layouts that cut monthly power and plumbing costs.

For example, the federal government offers homeowners a tax credit when they replace older appliances with Energy Star-approved ones. The results are savings in both the short term, with the immediate rebate most suppliers offer, and long term when monthly utility savings are taken into consideration.

Even manufacturers must meet higher efficiency standards today than in the 1960s whether or not they are looking for an Energy Star certification.

Many people think that in order to save money on your electrical bill, you must accept some discomforts or inconveniences. But that is not the case! You don’t need to deal with the unbearable heat in the summer instead of turning on your air conditioner. You don’t need to unplug all of your appliances after every use to save a few dollars.  We have put together a few key recommendations to get you started on your electrical bill savings without having to give up the comfort and conveniences in your home.

Home Energy Audit

The best way to start your savings is to have a local electrician perform a home energy audit. Your electrician will go through your house examining your electrical wiring, distribution, lighting, electric-powered home equipment and systems in order to increase the efficiency of your home and ultimately save you money on your electrical bill. Some auditors may even go as far as to understand your daily habits that may be costing you more money. For instance, did you know that doing a full load of dishes in the dishwasher rather than washing them by hand actually saves you money?

Once you have had your home audited, make sure to check out Live SmartBC for any rebates you may be eligible for. BC residents have the privilege of gaining rebates for increasing the efficiency of their home; don’t let this savings go to waste!

Install Ceiling Fans

Another great way to save money on your electrical bill is to install ceiling fans. Apart from your air conditioner, ceiling fans push air downwards, blowing the cool air directly onto your body rather than cooling the whole room. On top of that, ceiling fans need very little maintenance (other than a little dusting or bulb changes), which can save you a lot of money in the long run. You may be thinking, that’s great but what about in the winter when I’m trying to heat my house? Surprisingly, ceiling fans are a great energy saving tool for the winter months too! Heat rises. So by running your fan on a low speed, you can circulate the warm air that has risen and create a more evenly heated room and shortening the time it takes your heater to work. This saves you money both in the summer and the winter.

Replace Air Filters

Lastly, you can save money on small changes like replacing your air filters regularly. A lot of times, this is a task many of us forget about but it can make a significant difference in your potential savings. When dirt builds up on your filter it prevents the airflow from working as efficiently. Your air system now needs to work harder in order to maintain the same level of airflow and because of that, increasing your electrical bill. By regularly maintaining your air filters (once a month), you will not only save money, but your family will be breathing in the cleanest air.

These are just a few ways to save on your electrical bills. Our highly qualified team of professionals at Expert Electric is excited to help you get started on your potential savings. Call today for further assistance or a free quote on some of our money-saving services.  604-681-8338

There was a time when buying light bulbs used to be a much easier task than it is today. Then along came LED, CFL, and light bulbs bent on reducing energy. With this, the good old incandescent started losing their place on our bulb holders. Gone are the days when finding a bulb for your home just meant looking at the wattage on the box. If a bulb was rated 100 watts, you knew it would be 25% brighter than a 75-watt one.

An entirely new rating system is now used and this has been giving shoppers grief for quite a while. At the center of this confusion is the word ‘lumens,’ which appears along its older and more familiar cousin ‘watts.’ Learning about lumens is the price you pay to help keep our planet safe. Don’t worry, though. We will tell you everything you need to know about the new lights rating system.

Lumens are units used to measure how much light a bulb puts out. Watts measure how much electrical power the bulb uses. With incandescent bulbs, the expected brightness pretty much depended on the wattage of the bulb. One lumen is equal to the amount of light given out by a birthday candle.

The idea with energy saver bulbs is to use fewer watts and produce more power. Incandescent bulbs produced by different companies are pretty uniform. On the other hand, energy saver bulbs are so varied, you don’t know if two 50 watt bulbs will be equally bright. This is why CFL and LED bulbs have lumen figures printed on them while incandescent varieties only have wattage.

When you hear “lumen per watt”, think miles per gallon. This is a measure of efficiency. It measures how many lumens of electricity a bulb can produce when using up one watt of electricity. This is the factor that should interest you the most when you are buying light bulbs. The first step is to figure out the brightness you want in lumens. If you want a brighter room, go for a bulb with more lumens. To dim it down, consider a bulb with a smaller lumen rating. Also, find the lumens per watt rating to determine which bulb has the greatest efficiency. Usually, the lumens per watt rating is an average, as bulbs reduce in efficiency with time. The lumen per watt rating is calculated by dividing the brightness in lumens a bulb offers by the number of watts it takes to produce.

Watts can be converted into lumens by multiplying the lumens per watt rating by the brightness.

The Federal Trade Commission now requires a product information summary, called the Lighting Facts label, to be attached to every lighting product. Another label that you should be on the lookout for is the Energy Star mark. The system was created by the Environmental Protection Authority in 1992 to govern the energy consumption of various household and industrial appliances. When it comes to lighting, this mark is put on bulbs that have met a certain lumen per watts threshold. This mark effectively spells impending doom for incandescent bulbs because they do not come anywhere near fulfilling these new efficiency ratings. If you are not into reading the fine prints and making calculations, the Energy Star logo will make your life easier. Look for the label on light bulbs to ensure you are getting a good deal.

The chart below can help to understand the Energy Star system.

This chart is an excellent indicator of how incandescents measure up to energy savers.

Aside from the fact that you have one more bullet in your trivia arsenal, your hunt for light bulbs should now return to the simple task it should be.