Many homeowners don’t know when the time is right for home generator repair in Mount Vernon, and will simply allow their generator to go to waste. That’s unfortunate, because a generator can come in handy during a particularly rough storm in terms of supplying power to any of your home’s appliances. You’ll able to tackle some work-related tasks on your computer, binge watch your favorite television show, and store leftovers from last night’s dinner all while a storm blows over. However, you may have to get used to living by candlelight if you don’t seek generator repair soon enough!

Think you need generator repair? Call Beacon for assistance when you notice these 4 signs:

Large factories, refineries, and oil facilities are all industries that require special considerations for their electrical wiring. Heavy-duty applications and hazardous environments must use products built to resist corrosion. Chemicals, rain, snow, wind and other threats damage industrial wiring. As a result, good maintenance and repairs are imperative.

With a properly installed tray system, the next step includes teck cable. This armored cable with an exterior jacket, comes in nearly any combination of conductor sizes, voltages, and cores. Fiber optic, CAT6, and shielded twisted pair cables are available. These are usually color-coded based on their type. Teck cables can be pulled through cable tray, conduits, or buried underground. For buried cable, ensure that it is placed at the appropriate depth, protected by layers of sand, spaced properly, and that buried cable warning tape is conspicuous.

Some clients request protection for buried cables; therefore bricks, concrete slabs, or planks of wood are utilized. Where cables emerge from the ground, they should be protected by a PVC conduit sleeve. Teck cables must be secured to the rungs of the tray using approved Ty-wraps or cable clamps. This not only keeps cables neatly arranged, but reduces the chances of damage.

Once a teck cable has been fed to its destination, it is connected by use of a teck connector. These connectors serve two purposes. The threaded end puts tension on the cable by means of a rubber gasket, which holds the cable securely in place. In addition, a small metal star-ring inside the connector makes contact with the metal armor of the cable, bonding it to the connector. This is why, when preparing a cable for the connector, that 3-4 rings of cable armor are left exposed.

In locations with potentially hazardous or explosive gasses, explosion proof connectors must be used. They have a small internal chamber meant to hold an epoxy sealing compound. This seal contains an explosion in the event of a failure. In addition, it prevents gasses from traveling through the small gaps between wires to potentially non-hazardous locations where arcs and sparks cause harm.

Good working knowledge of industrial wiring applications is essential to ensure safe and reliable installation. Finally, with the use of heavy-duty materials, a facility can expect many years of problem-free service.

1.  Add an accent lamp to your dining room console.  Find an accent lamp that is slender enough for your console table.  Locate outlets behind consoles to keep cords hidden from view.  A single lamp works well for a smaller service area.   Consider a pair of accent lamps for an extra long dining buffet/console table.

“Brittany” from Chelsea House

2.  Dress up a vacant corner and extend your room’s design with an accent lamp on a pedestal.  An accent lamp atop a tall pedestal should stand between 5-6 feet above the floor.

To find the correct height for an accent table lamp by a reading chair:  While you are seated, estimate the height from tabletop to your eye-level.  Choose an accent lamp with a light source at that height.

“Masterpiece” from Butler Specialty

3.  Decorate your patio with a few accent lamps.  Be sure lamps are UL-listed for damp locations when looking for patio accent lamps.

“Brent” from Kenroy Home, suitable for damp locations

For more information on accent lamp applications or to see the latest lighting designs, visit 1800lighting.com.