Are your customers getting hot under the collar about rising energy costs? If so, suggest they buy a ceiling fan.

Although ceiling fans do consume electricity, experts say the amount of money homeowners can save on air conditioning greatly outweighs the cost of running the fan itself.

“Ceiling fans provide year-round comfort and efficiency,” says Barb Wright, a ceiling fan product manager at Westinghouse Lighting.

Wright says the cost of operating a ceiling fan varies based on how often they’re turned on and how much the electric company charges, but on average, she says a standard ceiling fan costs less to operate than an incandescent light bulb.

Experts say ceiling fans reduce energy in two ways.

First, fans circulate the air in the room, preventing hot air from accumulating at the ceiling.

“A ceiling fan helps equalize the temperature throughout the room, so your air conditioner doesn’t have to work as hard to keep the room cool,” says Scot Wetmore, marketing director at Dan’s Fan City, a ceiling fan retailer with more than 50 stores in the United States.

When people are in the room, Wetmore says ceiling fans have the added benefit of making people feel cooler.

“Ceiling fans cool by evaporation, like a wind chill factor,” he says, adding that fans will make it feel like it’s about 6 degrees cooler in your home than it actually is, allowing you to set your thermostat 6 degrees higher. According to Progress Energy, an energy company that services North and South Carolina and Florida, homeowners can save 7 to 10 percent off their cooling costs for each degree above 78.

And ceiling fans don’t just save money in the summer. Ceiling fans run counterclockwise in the summer, but many ceiling fans are equipped with reverse switches which allow you to run the fan clockwise in the winter, thereby reducing heating bills, too.

“[Changing the direction of the fan] makes the air column go up toward the ceiling, and what it does is it drives air currents up on the ceiling to the wall and down the wall, and that helps redistribute heat from the ceiling. So it helps lower your heating bills by re-circulating the heat,” Wetmore explains.

If a ceiling fan also includes a light fixture, Wright says customers can maximize their energy savings by replacing the incandescent bulbs with compact fluorescent bulbs.

Wright says homeowners should also consider buying Energy Star-rated ceiling fans. “They are about 50 percent more efficient than conventional fan/light units with an estimated energy savings of $15 to $20 per year,” Wright says.

According to the Environmental Protection Agency’s Energy Star Web site, Energy Star-rated ceiling fans move air up to 20 percent more efficiently than conventional models due to advanced blade and motor design, and Energy Star-rated ceiling fans that have light fixtures are about 50 percent more efficient and produce about 75 percent less heat.

Several ceiling fan manufacturers make ceiling fans that meet the government’s Energy Star requirements, including Casablanca, Kichler, Minka Aire and Savoy House.

Click here to shop hundreds of decorative and functional ceiling fans at Capitol Lighting’s 1800lighting.com and start saving on energy today!

A lot of time we are asked what is the equivalent LED product to convert from Metal Halide, High Pressure Sodium or Mercury Vapor. And a lot of time, we have a product in mind that works based on past experience. But how did we come up with that product, and how did we make the original decision on what was the proper replacement?

There’s a lot of science that goes into light, color, quality, and each light had it’s own characteristics. For example, it takes less LED to replace High Pressure Sodium than it takes to replace Metal Halide. And we are talking a lot more than just lumens. We are talking about color temperature, quality of light and something called photopic / scotopic lumens.

In the world of lighting, we measure foot candles with a light meter, this is called a photopic measurement. The light meter picks up everything, including spectrum’s that are invisible to us. Now, we humans see things to, and this is called scotopic lumens. Our rods and cones read and interpret light. And it does so differently than what a light meter does. So it is not uncommon when we demo a LED Light against a HPS light or Metal Halide, we first ask “Which is brighter” before we show the light meter reading. It leaves a few people scratching their heads. Well, that’s the science of of it all, and fortunately there is some handy tables called SP ratios that allow us to take the lumens of a particular light (photopic lumens) and multiply it by the S/P ratio to get the scotopic lumens equivalent.

For example, the S/P ratio for High Pressure Sodium is 0.40. The S/P ratio for LED at 5000K is 1.8. So if you take 40,000 lumens of HPS and multiply it 0.4, the effective scotopic lumens is 16,000. To get the same amount of lumens from LED, take the 16,000 and divide it by the S/P ratio and you get 8888 lumens. So the 8888 lumens of LED is the photopic measurement, the 16,000 LED lumens is the scotopic lumens measurement. So in an nutshell, you need 8,888 lumens of LED to replace 40,000 lumens of HPS from a scotopic point of view.

Here is a handy chart of common lights and ratios for you to use.

Have you been struggling with what feels like a lack of electricity in your home? You don’t have enough outlets and have extension cords plugged in here and there. Maybe you have to unplug appliances in the kitchen so you can use another one. Your microwave and toaster can’t run at the same time or your breaker trips. These are all major inconveniences and at times, they can pose a fire hazard. It may be time to consider an electric panel upgrade. The crew at The Electric Connection is familiar with this particular job and can get it done professionally and efficiently for you.

An electric panel upgrade is typically needed for homes that were built before the 1980s. 30 to 40 years ago and of course long before that, homes didn’t have even half of the appliances that we have today. There wasn’t a computer, television and even a mini fridge in every room. Today, we are very dependent on the gadgets that run our life and make life easier and that means we are very dependent on the electricity needed to keep them going. An electrician in California can upgrade the panel and give you the additional electricity you need to make your home run smoother.

Once the panel is upgraded to 200 amp or higher service, you can have additional outlets installed. You can have some of the outlets in the kitchen put on separate breakers so you can run your microwave, toaster and coffee maker at the same time. You will discover the upgrade truly makes your life a little easier. You may even be able to save some time in the morning and will absolutely reduce your frustration as you work around your electrical problems. Your California electrician is ready to help. Just give The Electric Connection a call today and schedule your initial consultation.

We Respect Your Time – Custom Electrical Services knows that we live in a extremely busy world with hectic schedules. When you call one of our Ames electricians we will have courteous and helpful team members take your call and work with you to schedule your appointment.  Our uniformed Ames electrician will arrive in a warehouse on wheels.  They will have the part needed for your repair and if for some reason they do not there is no additional charge to you.  Our electricians have 24 hour access to leading Ames supply houses as well as access to all Des Moines metro area suppliers. This not only saves you time but money as well.

 We Respect Your Schedule – Our electrician in Ames understand that you are making time in your busy schedule to have your electrical problems fixed. Our friendly electricians are prompt and professional and even give you a narrow time window so you don’t have to wait around on them all day. We Respect Your Business – Custom Electrical Services knows that you have choices; we respect your business and will always do the job right the first time. Our Ames electricians never take shortcuts and always use the highest grade materials available.  We understand how important your business is to you as ours is to us.  We want to build long term lasting relationships with our customers so they know they can always count on one of our electricians in Ames to for all there electrical needs.

 We Respect Your Safety – Custom Electrical Services doesn’t just send anybody to your Ames home or business, we send one of our trusted professionals.  Your safety is our number one concern.  That is why we make sure all our service professionals undergo stick 3rd party certifications.  Our electricians are Drug Tested, Background Checked, and Professionally Trained.

Electrician in Ames 24/ 7 Service Area Map

Our on call Ames electricians have a large service area.  We cover not only the Ames area but also the entire Des Moines, Iowa metro area.  Even if you live outside of Ames please do not hesitate to give us a call 24 hours per day.  We can cover areas outside of Ames.  Our on call Ames electrician get your home or business up and running in no time.  Service calls and repairs are not the only thing our electrician can do for you.  At Custom Electrical Services we wire over 300+ new construction homes each and every year.  Are you the general contractor on your home or working with a professional general contractor?  Make sure you have Custom Electrical Services bid your next project.  Our design team and put lighting layouts on your plan and make sure you have the latest and greatest options for your homes electrical.