To Tampa residents, power outages are nothing new. We’ve dealt with all kinds of crazy storms and annoying weather in our time here, and it can be quite flustering if you’re not sure how to handle things. But if you’re prepared and know what to do, an outage can become little more than brief annoyance. Find out what to do during an outage with the help of the experts at Hoffman Electrical!

Dallas Electrician‘s Top Electrical Installation Tips for New Home Owners

Buying a home is a wonderful investment, and your home will be your sanctuary for years to come. Of course you want your home to be perfect; no home owner dreams of such things as a flood or an electrical problem. However, these problems do occur, and while flooding may not be preventable, you can always take the necessary steps to prevent electrical problems. If you plan on installing electronics in your home, electrical safety should be one of your top concerns. Electrical fires can cause irreparable damage to your home, but Dallas electricians like ElectricMan Inc. can help correct your existing electrical problems or provide assistance with installation.

There are ways to prevent electrical problems in a new home, and the electricians at ElectricMan can help, so consult someone knowledgeable before you begin your home improvement. What are some ways to prevent electric fires in your home?

There are over 53,000 electric fires in the U.S. each year, but these can easily be prevented with the help of a whole house surge protector. Surge protectors prevent the discharge of excess electricity due to lightening storms or blown circuits. If your home is prone to electrical surges, a whole house surge protector may be just what you need to prevent an electrical fire.

A GFCI outlet is a device which increases safety by reducing the risk of electric shocks. Most building codes now require that GFCI outlets be installed in wet areas like bathrooms, kitchens, garages, laundry rooms, and outdoor areas. GFCI outlets monitor for current imbalances and break the circuit if such an imbalance occurs. They are an important safety measure and should be installed whenever there is water and electricity.

Did you know that 30% of all surges and outages are caused by lightning strikes? These lightning strikes don’t even need to hit your home directly to cause major damage. In fact, just a strike within a half mile radius can cause permanent damage to your appliances. Installing AFCIs in your home are just one of the ways to lessen the side effects of voltage surges, and prevent residential fires. Indeed, 50% of residential fires could have been prevented, according to the National Electrical Manufacturers Association.

If you use any of the tips we provided, you are already on the right track to living carefree in your new home. And if some of these tips seem too complicated, we are only a phone call away.

Are there any tips that you’d like to add to the list? Post in the comments. We’d like to hear what you have to say. 

/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

Warm weather and clear skies means it is finally barbeque season once again! May is National Barbeque Month, and we are definitely in the festive spirit. But before you get ready to fire up the grill and bust out the pool rafts, make electrical safety a priority. It might be time for an outdoor outlet upgrade to keep your parties running smoothly this summer.

So just what do you need when it comes to outdoor electrical outlets? Make certain to have ground fault circuit interrupters (GFCIs) installed outdoors for your outlets to protect from serious electrical problems. It’s also always a good idea to have additional outlets installed if possible, especially if find yourself running extension cords across your deck that have become a safety hazard.

Don’t overlook the manual warning of certain appliances that say “not for outdoor use.” It’s always safer to double-check before running into a problem later on. Make sure that electrical appliances are unplugged and turned off when not in use or left unattended.

Just like your outlets and appliances, extension cords need to be rated for outdoor use when you are using them in your backyard. If you must have extension cords running across your backyard during a barbeque, make sure to keep it out of the walkway and away from where children will be playing.

If a rainstorm begins while you’re working as a master chef outside on your electric grill, don’t be a hero for the burgers. Stay safe and head into the kitchen with a backup plan to avoid the risk of electric shock.

Don’t kick off barbeque season without getting pools and spas inspected by an electrician who can make sure you’re backyard is safe and ready for the summer. This is also a good time to make sure you know where electrical circuits and breakers are in case of an emergency.

If you need any help making your backyard barbeque-ready, our professionals can make your electrical renovations and fix-ups a breeze.