If you’re already familiar with rebates from electric utilities and government organizations in your area, you may notice that the dollar amounts for most rebates have decreased over the past year. The average rebate for an LED replacement lamp has gone down by 7% since last January. Rebates amounts also decreased for LED fixtures: recessed down lights decreased by 66%, accent lighting by 12%, and high bay fixtures by 8%.

You needn’t be alarmed by these numbers, though. They’ve only been adjusted to match the lower prices of LEDs in 2013. Less money is necessary to make purchasing an LED financially attractive. Also, since there are over twice the programs this year, money is even more accessible.

If you’re still pondering a switch to LEDs, or have never considered utilizing LED rebates before, starting to look for them is easier than ever. Currently, you can find rebates and incentives for energy efficient commercial lighting in 71% of the U.S. As the year progresses, we should see that number go up.

We had a call today from a customer. They were looking to retrofit their existing fixtures with LED. The competitor did a quote for them, and had recommended LED Post Tops as the retrofit bulb of choice for them. And this would have been a terrific solution if all their fixtures were acorn style pole mounted lights. But they weren’t, they were high bays, parking lot lights and show room lights. Yes. They are LED. Yes. They will save you money. But if you are trying to plow a field, you don’t buy a Porsche. You buy a tractor. The right vehicle for the job. And the same applies to LED.

First, let’s make sure we set the score right. We sell both. We sell LED Post Tops and we sell LED Retrofit Kits. We are not Post Top biased or Retrofit Kit biased. We even sell new fixtures. We have no biases! We want what is right for you!

contact our team and we’ll get back to you.

An electric conduit is electrical tubing used for protection and routing of electrical wiring. They can be made from a variety of materials, such as: plastic, metal, fiber and fired clay, all depending on the purpose it is being used for. It is generally installed by electricians at the electrical equipment’s installation site. The regulations governing the conduits’ use, form and installation details are specified by the US National Electrical Code (NEC).

Conduit is used as a general term to describe any system that contains electrical conductors. The conduit systems are installed for the following reasons:

To operate as pull outlets for the conductors that are being installed Make 90° bends in conduit runs

Types of Conduits

Conduit systems are classified based on the material used to make the tubing, mechanical stiffness and wall thickness. The material is selected for mechanical protection and corrosion resistance after taking into consideration the cost factor. There are special guidelines to be followed for wiring equipment in hazardous areas that need prior approval. Based on these factors, we examine a few prominent conduits:

Form 35/5/85 ex. Appleton LB400M

The Form 35 is used for malleable iron unilets as they have high tensile strength and ductility along with high corrosion and shock resistance. With the easy inbuilt rollers of type C (1-1/4” thru 4”) and type LB (1-1/4” thru 4”), these type of conduits help eliminate the damage when cable is pulled through the hubs. Form 5 has inbuilt rollers on all 11⁄4 to 4 C and LB bodies to facilitate wire pulling.

Form 7 ex. Crouse hind LB37

The Form 7 ex. Crouse hind LB37 is compatible with rigid and intermediate conduits for indoor as well as outdoor installation. It is made of cast iron or cast aluminium for a long life. It is extremely suitable for compact installations with rigidly threaded conduits of various shapes and sizes. The Form 7 has an exclusive snap tight and wedgenut cover attachment to provide clear, unhindered cover opening.

Mogul ex. Appleton BLB400m

The Mogul ex. Appleton BLB400m has a large body size that facilitates pulling of large and heavy conductors and are used as cast covers for providing additional wiring area. These are best used for pulling straight, 45° or 90° angle turns as well as for making taps and splices.

Form 8 ex. Crouse LB38

The Form 8 ex. Crouse LB38 is a 1” rigidly threaded conduit without cover and gasket made of Feraloy iron alloy. It is useful for indoor and outdoor use and comes in sizes ½” through 4”.

Form 9 ex. Crouse LB39

Your business operations are probably reliant upon electricity, like most operations in the modern world of today.  Do you have a backup plan in case the power goes out?  Most other businesses will simply shut their doors and deal with the consequences when the power is restored, but you can maintain business as usual thanks to the innovation of backup power systems.

Also known as emergency power generators, these units are delivered to you with a fully-charged battery that can be put to use the moment you need them.  If your business has experienced frequent power surges or outages in the past, hiring a Dallas electrician to install an Indoor GeneratorTM for your business could be incredibly beneficial.  For certification or insurance reasons, you may have an even greater need to remain up and running.  Your valuable computer or medical equipment will thank you when you save them from the devastation of power surges and outages.

Consider these benefits of having backup power systems installed in your business:

If you are ready to have a reputable Dallas or Plano electrician get you set up with the best investment you have ever made for your business, you can explore your options for a backup power system and receive a quote today.  The next power outage that hits can either leave you with regret, or a feeling of immense satisfaction with your decision to plan ahead.