As we enjoy the final days of spring, it is time to prepare for a scorching summer and everything that means. Summer is an excellent time to enjoy evenings outside on the back patio with a cool beverage, your favorite book and a little music. Maybe your summer evenings involve entertaining outdoors. No matter how you envision spending your summer nights or days, you will be happy to know it call all be that much more comfortable with the installation of an outdoor ceiling fan by and electrician in Los Angeles. These fans add elegance as well as provide a cool breeze. Your friendly electricians at The Electric Connection are here to help you get the most out of your summer.

Ceiling fans indoors have proven their value time and again. Their cousin, the outdoor fan, is often overlooked, but it is just as useful and provides plenty of benefits when placed over a patio, deck or in an outdoor room. As with an indoor fan, the outdoor fans provide a quiet breeze that helps break up the stifling heat. There is another bonus the fans provide—they are an excellent bug deterrent. Flying insects like mosquitoes, gnats and even bees can make your time outdoors unpleasant. With the breeze created by the fan, the bugs will be less likely to invade your space.

An electrician will need to complete the installation of your outdoor fan. Electrical wiring will need to be run outside and along a wall or deck material to the junction box where the fan will be installed. Because of this, you will need to have an electrician familiar with the intricacies of the Los Angeles electrical codes. You will also rest easy knowing the fan was installed correctly and safely by an experienced electrician. If you are ready to make your outdoor summer nights more enjoyable with an outdoor fan, give The Electric Connection a call today.

Maintenance Factor

Illumination Systems are designed to fulfill the required lighting level at the end of an operation term and not at day one of the new installation. The luminous flux of the system is going down over lifetime. This is a normal process, no product is lasting forever but the required illuminance levels should not be depreciated at any time. If a lighting system is setup, the maintenance plan has to be fixed too. So the facility managers know how often to clean the room, the luminaries and how frequently to change lamps. A reasonable time needs to be found between maintenance and operating hours, as maintenance cycles are connected to costs. The longer the operation time without maintenance, the more luminaries need to be installed to guarantee the required illumination level at the end of the term. The more frequent the maintenance cycles, the higher the maintenance factor, but also the related costs for the facility service.

Which Points are influencing the Maintenance Factor? Different factors influence the decrease in lighting level like the soiling of the room surfaces, the soiling of the luminaries, depreciation of luminous flux by the light sources or lamps failure.

Room Surface Maintenance Factor: The room surface maintenance factor is the ratio of the room surfaces reflectance before and after cleaning. It is the reduction of the lighting level according to soiling of the room. Luminaire Maintenance Factor: The luminarie maintenance factor is the ration of the luminaries luminous flux before and after cleaning. It depends on the luminarie construction and design (open housing or closed one) as well as on environmental conditions (dirty or clean). Lamp Lumen Maintenance Factor: The lamp lumen maintenance factor is the ration of luminous flux at a specific time compared to a new lamp. It is describing the aging of the lamp or the reduction of light intensity over time. Manufacturers offer comprehensive tables about their lamps luminous flux behavior. Lamp Survival Factor: The lamp survival factor depends on the service lifetime of a lamp. Some lamp lifetimes are reduced by frequent switching. The lamp manufacturers provide tables indicating the lamp survival factor. If a lamp is not working any more, the decision for immediate replacement or group replacement needs to be taken. If the lamp is replaced immediately (mostly in areas where the luminaire is easily reachable) the LSF can be set 1. On the other hand, the decision could be to replace lamps in special terms or group-wise. This could be the case in huge halls, where machines need to be stopped to reach the luminaires.

A maintenance factor of 0.8 shows, that the new lighting system needs to be over driven by 25% not to undercut the minimum required illumination level after 10 years. LED lighting systems are flexible and easy to connect to control systems. The installed load will provide efficient luminous flux at the end of the operation time but the energy that is “over” in the beginning can be saved. The new installation would illuminate an area with required 300lx by about 450lx. The energy can be saved by lighting management systems that are regulating the power concerning the luminous flux depreciation. HID lamps are not easy to control. The energy load that is “over” in the beginning is wasted. No change to save it.

Conclusion: Think carefully when setting up a lighting installations maintenance plan. This starts already with the choice for the light source. LED Modules are efficient, likely not failing and offer long lifetimes between 50,000h and 100,000h. The control possibilities are comprehensive. The luminaries overload, that needs to be installed to guarantee the end of lifetime illuminance levels, can be saved by light management systems. Regarding all the mentioned points, LED is the competing light source. The features are dominant over traditional light sources. Take the chance and install or renew your lighting system by  energy efficient LED light sources and luminaries. If you have further questions please contact the lighting experts at MyLEDLightingGuide.com and discuss products as well as solutions.

In these modern times, where a lot of stress is put on the importance of recycling and saving resources, one may wonder if it’s wise to use reconditioned electrical equipment. After all, it is a great way to save money and use materials that would otherwise be thrown out. But one also must consider safety which is key when you are thinking about any kind of electrical materials. Well, that truth is, there are some times when it is safe to use reconditioned electrical equipment, and other instances when it is not. Read on to find out the best ways to determine whether the reconditioned electrical equipment you are using is safe.

Many people believe that reconditioned electrical equipment is not safe. The truth is, sometimes it can be even safer than its original state. This can be the case when old parts are replaced with newer components that are safer and more efficient. However, that doesn’t mean that all reconditioning is done safely. Determining whether or not your replaced parts are in accordance with safety standards. A few prerequisites must be met by the company that is updating the equipment.

Last month, I wrote via www.bet.com

2) A Dwarf Makes Giant News

Astronomers are given the spotlight as they announce that Pluto, the dwarf planet with a changing orbit, has passed Neptune to become the ninth planet from the Sun. It had been the eighth farthest since 1979. Of course, we now know that Pluto is not a planet at all but some kind of ball of rock and ice. 

 4) Re-imagining Literary History

Tom Stoppard and Marc Norman win the Writers Guild Award for SHAKESPEARE IN LOVE. Also nominated were Robert Rodat for SAVING PRIVATE RYAN and Andrew Niccol for THE TRUMAN SHOW.

6) You’re Still the One

Shania Twain wins a Grammy for Best Female Country Vocal Performance for “You’re Still the One,” in which the Twain passionately announces, “We’re still together, still going strong.”

9) Run to the Hills

Gloriously, and to the headbanging delight of metal heads across the globe, Iron Maiden announces that singer Bruce Dickinson has rejoined the band. 

11) The Tumultuous Days Continue for Kid Dynamite

Early in the month, Mike Tyson is sentenced to four years in prison for assaulting two motorists after a traffic accident in 1998. The judge gives him only one year of jail time, followed by two years of probation and a $5000 fine. Days after he begins his sentence at the Montgomery County Detention Center, he is put in solitary confinement for throwing a TV in the general direction of some guards. He is released from solitary after about six days.

13) Return Mail

TLC releases their third album, FANMAIL, after a five year hiatus. The new album sells 318,000 copies in its first week, and it becomes clear to the world that TLC “don’t want no scrubs.”

15) The Dawning of the Age of the File Share

The Artist Formerly Known as Prince makes headlines a second time as he files a lawsuit against nine websites for copyright and trademark infringement. He accuses websites of selling bootlegged recordings and offering unauthorized song downloads.