You might think that there's not a whole lot that you can personally do to save money on your energy bill. After all, you need to shower, cook, use the lights at night and wash and dry your clothes -- all which take up electrical energy. You might be surprised to learn that there are small things that you can do to help save energy at home and in the process save money on your electric bill. 

1. Pack more efficiently

You pack more than just clothes for your next vacation. You also pack items into your freezer and refrigerator. Much like improper packing for your vacation will leave you with less room, not packing your refrigerator and freezer the right way can wind up using more energy. 

In general, a full refrigerator and freezer are more energy efficient. The more empty space there is in these appliances, the more space warm air has to replace each time you open the door. 

If you don't want to keep your freezer and refrigerator full of food, containers with water can be a great substitute. You can also try keeping the most used items by the door. 

2. Watch out for vampire power

Is your home a haven for vampire power? Vampire power, also called standby power, among other names, refers to the power that appliances used when they are plugged in but in standby mode or turned off. Some examples of common culprits of vampire power include televisions, computers and chargers for cell phones and other electronics. 

Put bigger electronics, such as computers and televisions, on power strips and get into the habit of flipping them off when you're finished with them. Unplug smaller electronics and your chargers when you aren't using them. Plugging up unused outlets helps stop the leakage of outside air into your home. 

3. Schedule a home audit

Nearly all homeowners want to save energy but few think that their home is a bastion of energy efficiency. An energy audit by a professional energy auditor can pinpoint the problem areas in your home and provide affordable ways to address them. Paying for the weatherization of your home can be expensive upfront. The long term energy savings as well as any tax breaks offered by the government can help you pay for it. 

LED Lighting Kit. This complete LED strip lighting kit is designed to permanently install on canopy tents, sun shelters, instant canopies, pop-up shelters, or E-Z UP Instant Shelters. A variety of colors are available—including “Bugs-Away” yellow—and the strip lights provide up to 360 lumens of illumination.

We, of course, love lighting. Layers of light help to brighten any space, highlight certain aspects of a room, and help set the mood. Justin Krutz, a blogger for Palatin Remodeling, sent us this guest post with interior design decorating tips to help you brighten your home beyond just lighting. Thanks Justin!

If you want to achieve flexibility of loading different electrical appliances in your home, implement the following approaches. The electrical conduits practices recommended here meet NEC guidelines guaranteeing proper load growth for both commercial and residential buildings.

If you expect the load on your house, office, establishments, or other buildings to increase in future, consider using at least 12 AWG conductors. Ensure that they have protection of 20-amp circuit breakers and are designed with a 15-amp load standard each.

In addition, consider implementing these measures on wires and cables to increase the optimal performance of your circuit conductors.

To allow the normal length of lamp cords and other wire cables, the NEC Code recommends more than six feet of distance between the point on a wall and an appliance receptacle. In applications such as kitchen countertops, electricians should wire receptacle outlets some twelve feet or four feet apart.

The biggest challenge here is the difficulty in predicting how items such as furniture in your house will be arranged. Additionally, there may be an inadequate number of outlets at various locations. Evidence for this can be seen in the outlet power strips that today’s equipment use.

In locations where you can expect a huge load, such as computer workstations, offices, and home entertainment, the use of Quadruplex receptacles is an ideal solution. Reducing the number of receptacles that a single circuit uses will limit the installation and use of sensitive equipment. It also positively affects circuit conductors, voltage drop, chance of interaction, and reduces the likelihood of harmonics accumulating to harmful levels.

If your home has a large kitchen and multiple bathrooms, you need additional circuits that go beyond the minimums of the NEC Code. This effectively maintains the high-capacity appliances that characterize these rooms.

In addition, limit the number of use receptacles per circuit. For example, a 15-amp circuit can run 1800 Volt Amps when working at 100 per cent rate. While NEC recommends using circuits at 80 per cent rate, this translates to 1440 Volt Amps.

For some reasons, NEC requires a high number of circuits for use in most commercial and residential buildings. The Code recommends that sensitive electrical appliances, high-capacity loads, and equipment that cause poor quality of power obtain power from individual circuits. This separation eliminates the interference with equipment on a common circuit.

Where individual branch circuits are installed, the harmonicas generated in other circuits are shielded from coming in contact with sensitive equipment. In addition, this prevents the high neutral currents from sensitive electronic appliances to those circuits, effectively eliminating the likelihood of incorrect operation and voltage drop.

Raceways provide the ease of upgrading conductors efficiently and give electricians the freedom to pull conductors through a building. Therefore, let spare raceways and safety electrical material is installed during construction to allow an easy installation of conductors in the future.

As appliances and equipment advance over time, the lighting and switching mechanisms in your house or building should anticipate future modifications. For example, motion detectors and other electronic lighting devices require a small standby current to remain in their optimal state.

Therefore, install the following solutions for safety switches and lighting appliances right from building construction.

These applications are necessary if you want to reduce the load on the circuits in your house. If you have not implemented them yet, call a reputable electrician today to overhaul the electrical conduits. While this protects the electrical wiring from possible hazards, it also safeguards the assets in your house or building.