If you are working with electricity, it is important to know how to safely install an organized electric wiring layout.  Fires and accidents can be caused by faulty electric wiring layouts, so it’s important to be able to recognize potential hazards and avoid them whenever possible.

Although this job may be The electric wiring layout for your home will vary according to what room you are doing the wiring for. In any case, it’s a good idea to draw a diagram of the layout first. The diagram will help you determine what lighting or appliances are needed, where they will be located and what sort of outlets will be necessary for each item.

Next you should determine which tools and Because it is so important to have your electric wiring layout installed safely, here are a few tips you should be aware of during the installation process:

Improving your home energy efficiency is a worthy and admirable goal. You can help reduce your impact on the environment while saving money with savvy decision making. However, the up-front investment for some efficiency upgrades is substantial, so always do your due diligence before you find electrician services and commit to buy. Read on to clear up some misconceptions about home efficiency and make sure your money is being put to good use.

You Don't Have to Sacrifice Your Comfort: It's true that the best way to conserve energy is to use less of it with strategies like turning off the lights or keeping the temperature lower in the winter. But that doesn't mean you have to sit shivering in the dark. The key to efficiency is to get the same amount of utility for less energy input. That means replacing old incandescent bulbs with LED versions, or investing in better HVAC technology like a smart thermostat. That way, you can keep your home environment tuned to your comfort while reducing consumption at the same time.

Don't Rush into a Big Ticket Item: The most dramatic way you can upgrade your efficiency is with a brand new heating or cooling system. Equipment efficiency has improved drastically in recent years, and new technologies like geothermal heat pumps, biomass boilers and solar panels can all reduce your bills dramatically. However, they aren't risk free. You’ll often face a significant up-front investment when you find electrician services for these installations, and the actual savings that you will realize can vary widely based on factors like the price of fuel. You could also see a loss if you make a big purchase and decide to sell your home soon after; there’s no guarantee you’ll recoup the cost in the selling price.

That's not to say you should avoid large efficiency investments – just look before your leap. You will get the best return from these items if you already need to replace outdated equipment anyway, and if you plan to stay in your home for many years. To reduce some of the upfront costs, you can also look for federal tax credits that refund up to one third of what you spend, as well as options to lease solar panels so you don't have to put any money down at all.

Don't Forget the Insulation: On the other side of the coin, new HVAC technologies won't do you much good if all that treated air just leaks into the outdoors. One of the biggest ways you can improve your efficiency is by plugging leaks and upgrading your insulation, which is typically a much cheaper fix. With a leak detector, some caulk and spray foam insulation, you can seal up your house with minimal investment, saving you money in the short term as well as preparing the house to get greater efficiency out of newer technologies.

For more straight shooting about how to get the most value for your efficiency investments, find an electrician to conduct an energy audit on your house. Your local Mister Sparky® is always available to help!

A workshop is a place full of productivity. Filled with tools and devices, this small hub can produce the most amazing and practical creations – but in order to keep it operating, there needs to be a significant amount of electricity. To keep your workshop running smoothly, here are some things to consider when it comes to the electrical setup.

Lighting is extremely important in the workshop. Often our workshops are found in a garage or a dark room off the home. In order to see all the intricate details and get your cuts just right you need to be able to see what you’re doing. Don’t compromise safety by working in a dimly lit room – install proper light fixtures. The most common electrical fixtures are fluorescent overhead, these are easy to install, energy efficient, and provide sufficient lighting. Correctly placing these around your workshop will help brighten up your workspace and allow you to move about freely without adjusting lamps. Another option to consider is track lighting. With track lighting and floodlights you can adjust the lights to cover your workspace and provide vivid lighting to the area that needs it the most. When installing these light fixtures it is important that everything is connected correctly. You don’t want your lights shorting out, flickering, or causing interrupts for your tools.

In addition to the electricity consumed by workspace lighting, you have a number of high-powered tools constantly in use. From table saws to routers, there is always a strain on your electrical system to power these tools. When setting up your workshop, it is a good idea to place the circuits on their own breaker separate from the rest of the house. This will prevent other appliances and electronics in the house from causing trips in the breaker when activated simultaneously while other tools are in use.

Another option to consider is to install a surge protector on the breaker that is being used for your workshop. The last thing you want is to have all your expensive equipment damaged by an electrical surge.

Lastly, ensure that GCFI receptacles are installed in the workshop. These outlets will shut off immediately to prevent the risk of electrical shock if a danger becomes present. These receptacles should be installed correctly for them to work properly. You will also need them placed around your workshop correctly so you do not need to constantly adjust the position of your tools.

Setting up a workshop can be complex and if not done properly, it can also be dangerous. We recommend that if you have a workshop at home or a business, that you have an expert electrician review the electrical setup and bring everything up to code for maximum safety.