We live in a wired world, appliances, lights, computers, and more need to  be plugged in.  All of those wires can become unsightly  depending on where they need to be run.  Think of a flat screen TV with the mess of wires hanging behind it, instead of being hidden—which would look better?

Unfortunately, phone and cable providers generally will not run wires based on a homeowner’s preference, and many of these companies will only wire on the exterior of a home. They will do things the easiest way possible, which usually involves running cables on the outside of the house and drilling in at the point of use. This may leave you with wires and cables placed along your walls not to your preference.

Some homes have certain wires—phone lines, typically—that are built in, but very few homes have cables for TV or other networks hardwired.    These phone and cable wiring issues could cause problems with connectivity and performance of certain devices.

Some really serious problems that need to be addressed immediately are:

These are not conditions that can wait until a more convenient time. You need to call your West Chester, PA 24/7 electrician immediately.

Do not worry. We’re here.

There are other times when electrical problems challenge your family’s lifestyle and comfort. Or you may have an elderly or disabled person at home who needs electricity for mobility or oxygen. In the case of the individuals with physical challenges, any electrical issue can be serious.

Customers have called on us numerous times for emergencies such as

There is something to keep in mind. Every customer is different. What may be an emergency to you may not be an emergency to your next door neighbor. Go by your own feelings. Do not let anyone tell you that it is fine to just wait. Let us know what is happening and we will honestly tell you if it is a critical problem. Just call.

Large foyer chandeliers and pendants make a true design statement, while providing plentiful illumination for the perfect introduction to your home or commercial space.

Your Guide to Finding the Perfect Foyer Chandelier

Whether you live in a cozy cottage or expansive mansion, fine lighting shines through more than any other home accessory or decorative piece.  A well-chosen foyer fixture creates a welcoming atmosphere, lending ambient illumination and decorative appeal to your home entryway.

1.  To achieve the desired effect, you need to size and install your foyer fixture properly.  A large foyer chandelier or decorative pendant fixture is especially enchanting if your home contains a defined foyer area with a raised ceiling or a glass picture window over the front door.

2.  To determine whether to use a semi-flush fixture, hanging pendant light or multi-tiered large foyer chandelier, you must know your ceiling height. The overall height of a foyer fixture should allow for a clearance of at least 7 feet from the floor.

3.  In a two-story foyer, if there is a window above the front door, center a larger foyer chandelier so that it may be seen from outside.

4.  If the foyer is extra-large, the addition of complementary wall sconces will supply additional illumination. Sconces should be installed 60 inches from the floor and at least 6 feet apart.

5.  Create a seamless flow by coordinating your large foyer chandelier with matching flush or semi-flush fixtures in hallways and powder rooms, or carry a unique design theme throughout by pairing an expansive foyer chandelier with a mini-chandelier in the powder room or extended archway.

The newest Corbett model, “Inertia” is a one-of-a-kind fixture, complete with polished stainless steel prisms and crystal.

This illuminating work of art by Jeff Andrews is prominently featured in the Kardashian’s “Dash” store in Los Angeles, California.   The “Inertia” fixture is provocative and stunning; with a 48-inch frame and eight lamps, this large foyer chandelier embodies a striking and sophisticated design.

The Kardashian family chose to feature the spectacular “Inertia” from Corbett Lighting to enhance the chic feel of the store and provide an eye-catching illumination for their clientele.

Maybe you’d like to put a little star power in your home entryway with a large foyer chandelier? Luxury lights and the latest decorative foyer chandeliers await customers at Capitol Lighting.   Receive one-on-one guidance with professional lighting experts who will help you find the perfect foyer fixture for your home or commercial space.

Find the exquisite “Inertia” series at Capitol Lighting stores or visit 1800lighting.com.  At Capitol, Corbett Lighting is a top-seller, and now with celebrity recognition.

The living room seems a little dim, you think. Here’s the DIY solution you cook up: you head over to the hardware store, buy a brighter bulb, screw it into the nearest lamp and bask in the incandescent glow. Easy, right?Not exactly. Using a lightbulb with higher-than-recommended wattage for a specific fixture is known as overlamping. This seemingly innocent practice is actually surprisingly dangerous, and is one of the leading causes of house fires in the United States — right up there with candles, smoking and cooking mishaps.

Overlamping is one of the most commonly overlooked mistakes a homeowner can make, and it can be deadly. A 2011 electrical fire that killed 11 people in Brisbane — the according to home improvement blogger Taryn Williford. When you place an incandescent bulb with wattage that’s too high in the socket of a lamp that cannot provide the required electrical output, the ensuing heat and intensity of the bulb can scorch or melt the socket and the insulation of the lamp's wiring.  

Now you have prime conditions for arc fault. An arc fault occurs when a spark jumps through the air between exposed wires. This sounds dangerous, yes? It is — in fact, the National Fire Protection Agency and the National Association of State Fire Marshals electrical power. A CFL often has a tubular shape atop the familiar screw-bottom.

An LED (light-emitting diode) light is directional, rather than radiant. This allows the LED to use much less energy than an incandescent light or even a CFL. LEDs can also directly replace incandescent bulbs in some cases.

CFLs use a much lower wattage than incandescent bulbs and create far less heat, making overlamping situations far less likely. LEDs also use much less electricity and even remain cool to the touch. The risks of overlamping are negligible.

There are drawbacks to any lighting solution. Incandescent (even halogen) lights are energy inefficient. CFLs are made from materials that are terrible for the environment. LEDs burn out at a quicker rate. The right light for you is the light that makes you most comfortable in your home — and that’s a decision you need to make.

If you live in Maryland, Northern Virginia or Washington, D.C. and need schedule electrical repair service online now.

Explosion proof fixtures are a necessity for environments which output potentially explosive or flammable fumes, produce dust of dirt in the air, or similar situations in which a gas could enter the fixture and cause damage to the light or well-being of the facility.

If you are currently running or working with a facility which requires these explosion proof light fixtures, the list of 3 must-haves below will clear the air and hopefully set you on the right track to ensuring you have the proper setup and design.

First on the list, we are going to talk about the actual technology within the fixture and why it is so important.

While a big part of vapor proof lights is the actual fixture and its design, we think the luminaire within the fixture is equally as important.

We simply can’t recommend any other technology other than LED because we truly believe in it. To give you a little bit of insight on industrial LEDs, here are some of the reasons why companies of all sorts are converting to LED:

As you can see, just from these three main benefits that all sorts of facilities are realizing can really be game changing in terms of savings.

For these reasons (and more), we thought it was a must to have it first on the list.

Interested in learning more? Find Class 1 Div 2. For this reason, we suggest you always inquire with a reputable and knowledgeable company that offers and deals with explosion proof lighting when inquiring about your lighting project.

If you can’t find a reputable company to ask your questions, just LED explosion proofs offer the long-term solution is clear.

Especially when you consider in rebates, your initial upfront investment can be reduced greatly. While these rebates do vary from place to place, they are most often available when you buy DLC qualified fixtures. Not only are DLC qualified fixtures going to make you more eligible for rebates through your utility company, but they also provide other benefits. The biggest benefit of buying DLC qualified lights is they have ben tried and tested and, in most cases, do what they claim. In a busy world of lighting, not all products do exactly what they say. This is most common when a light is not qualified by something like the DLC.

Our main advice is this; to get the best value buy only DLC qualified fixtures. If you don’t, you may actually end up spending more upfront (by not getting any rebates) as well as more energy usage overtime, due to a less efficient build.

Another major cost saver can come through retrofitting. The only time you can retrofit is if your fixture is still functional and can fit a LED retrofit in it. If you do not match these requirements, then a full replacement will (typically) be required.

If you can, we suggest you retrofit. It saves money in two ways: retrofit kits are cheaper than full fixture replacements and the cost to retrofit is typically less time consuming and thus, less expensive.

In Summary

We know that a sensitive environment can be stressful to deal with, especially when it comes to the lighting system and the safety of the facility.

The above 3 must-haves are just the beginning, and each situation can vary greatly. As always, we suggest you consult with some lighting professionals to truly discover what you may require for your facility and operations.