Wind power is electricity-generating technology that is very similar to hydroelectric power and burning fossil fuels. In all three cases, something is being used to spin a turbine, which then converts that energy into electricity. In the case of fossil fuels, the fuel is burned, which converts water to steam, which then spins the turbine. Hydroelectric power generators use the force of flowing or falling water to turn their turbines. Wind turbines are turned by the power of the wind, making them an ideal source of energy for places with high wind, such as the Great Plains. While the idea of wind power conjures up images of fields full of spinning turbines, it is not hard to find an electrician in Santa Monica who can help you to install one on your own land.

Wind Farms

The majority of all wind power is generated on huge wind farms. Each wind farm typically maintains and operates hundreds of wind turbines, which in turn connect to local electrical circuits that eventually funnel them into the main electricity pool. Your local utility company most often runs these energy operations as a secondary source of electricity. In fact, many companies give you the option to guarantee that some or all of the electricity that you use each month comes from their wind farm operations. In the event that you are unable to install your own wind turbine, this is a great way to contribute and further investment into wind power.

Residential Wind Turbines

As the call for more renewable electricity sources has grown more popular, so has the use of residential wind turbines. In conjunction with other small-scale energy sources such as geo-thermal and solar, wind turbines can be a great electrical upgrade to any home. One caveat is that you must have a small amount of land in order for it to be an ideal fit for you. Talk to a local electrician Santa Monica CA, The Electric Connection for example, to determine whether or not one will work for you.

Installing a Residential Wind Turbine

Although a wind turbine generates electricity for your home and community, its installation is not typically completed by a Santa Monica electrician alone. Because of the complexity of the installation, it is best to find a company that specializes in their application. In most cases, this company will complete the erection and initial setup of the turbine, and then turn it over to an electrician Santa Monica, such as The Electric Connection, to complete the tethering to your home and power grid. This ensures that both the turbine installation and the electrical work is done in the safest, most complete manner possible.

In addition to connecting your new turbine to your home, your electrician may also need to perform a panel upgrade, and small amount of home rewiring. While this is typically not extensive, it is slightly more involved than having electrical outlets replaced. For the best outcome, you should always have someone conduct his or her electrical estimates before the work is started so that you know what to expect.

In regards to small-scale renewable energy sources, wind and solar power are by far the most popular, approachable options. Although many see them as unsightly, most believe that the benefits outweigh the costs. After their initial installation, these electrical upgrades require very little maintenance, provide clean consistent energy and rely on a 100% renewable source. If you have any questions about whether or not you should look into wind power, or other alternative energy sources, don’t hesitate to call or visit our website at www.theelectricconnection.com.

If there are two things you should never mix, its water and electricity. Water actually reduces the body’s electrical resistance. This is why you probably know to never get electrical devices wet; such as bring a radio into the shower with you. It is important to keep yourself safe in the room that has the most water in it. Here are some tips when it comes to running electricity through the bathroom.

Sometimes it can be difficult to light the bathroom properly. With minimal windows or frosted windows, the light just doesn’t come in the same. Lighting is even more important in this situation so you have proper sight to avoid any hazards. You may require ample lighting to keep everything in your bathroom visible at all times. Plus, proper lighting can make your bathroom more peaceful and relaxing.

When installing lights in a bathroom it is important to ensure that they are watertight and water proof. When you have a hot bath or a hot shower there can be a significant amount of steam. If this steam gets into the light fixture or electrical connection it can corrode the wires and increase the chance of electrical surges and fires. If you are installing new lights in your bathroom have an expert check the product and connections to ensure that you are safe.

Blow dryers, shavers, curlers – there are many electrical devices that are commonly used in the bathroom so there needs to be an electrical outlet. This can be a huge risk for electrocution if not properly placed. Electrical outlets should be on their own dedicated circuit. In the event that there is a surge or water contact, only that circuit will shut off. The outlet should also have a GFCI (grounded fault circuit interrupter). Without a grounder, electricity can escape from the device and if you are wet, this is the last thing you want. Lastly, the outlet should be near the sink for functionality, but not close enough that any wires can hang into the water.

Our bathrooms can be a place of peace and escape, but you must respect the danger of putting electricity near water. If you are looking to remodel your bathroom call in an Expert Electrician.

Although you may not think that an electrical malfunction is liable to happen to you, studies have shown that the majority of all house fires result from some sort of electrical malfunction. Furthermore, many of the homeowners affected by these fires reported that something seemed somewhat wrong, but unimportant. As a result, the issue was ignored, leading to a catastrophic fire. Because of this, it is very important to address any electrical odors or other issues that could eventually lead to dangerous shock or fire. Never underestimate the power of your electrical system, and be familiar with the signs and symptoms below that could signal a dangerous electrical problem.

Frequently Tripped Circuit Breakers

If a circuit breaker in your home trips constantly, you should treat this as a potentially serious electrical issue. Whenever this happens, there are a variety of things that you can do. You should, however, start by calling an electrician in Burbank to discuss the problem. Your circuit breaker is designed to stop the flow of electricity into your home whenever dangerous or inconsistent levels of electricity are detected. This could happen because of an overloaded circuit, short circuit or ground fault. Check to see if your circuit is overloaded, and then call your electrician. This could be much more than a minor annoyance.

Outdated Electrical Systems (Fuse Boxes)

If your home is still equipped with an older fuse box, you should call your Burbank electrician to have them perform an electrical service upgrade. Because these systems were not designed to handle the electrical load that we require today, fuses blow frequently and can result in dangerous situations.

Other Warning Signs:

You owe it to yourself to keep your electrical system as safe as possible. If you experience any of these signs and symptoms, or just feel like something might be wrong, call The Electric Connection today.

Visit our company profile.

From the National Fire Protection Association, there were 1235 revisions made since 2014. First of all, code-making panels from the NEC created these revisions which were submitted to the NFPA for consideration. Below, find some of the NEC code changes that were proposed and/or made to electrical safety codes.

This change requires the branding of any reconditioned equipment, Furthermore, descriptive markings, trademarks or name must be displayed. Additionally, it enables the recognition of the responsible organization that carried out the re-branding.

Most noteworthy, with the changes in this code, any electrical equipment would be traceable from its worker or buyer.

Added to cover any electrical equipment located in a cramped place. This includes:

This change was directed at checking the provisions of equipment used in limited spaces. Also, it addresses compliance of crawl spaces and ceiling spaces.

This is a general review of 110.26. For any type of working space, conspicuous and permanent signs should be provided.

The above code changes should be followed by engineers, architects and designers. The new NEC Code Changes were developed to avoid complications or unlawful/unsafe activities in the workplace.

Under-Cabinet LED Lighting Kit is available for purchase that contains a plug-and-play LED light strip, push-button dimmer, remote, 12V power supply, and connection accessories. If you want to build a custom kit, follow the steps below the diagram to ensure that you get everything you need.

3. Select a dimmer or controller

For single-color LED strip light setup

Select the power supply large enough to operate the amount of LED strip light you need to use. If you want to control the brightness of your light strips, you will need a Single-color dimmer shown installed with a non-dimmable power supply

For color-changing LED strip light setup

Follow the instructions above for the single-color light strip setup. However, instead of a dimmer, use a RGB color-changing light strip installation

4. Use an LED amplifier for long runs of strip

Depending on the strip chosen and its maximum run (the number of strips that can be installed consecutively before needing amplifiers), you will need to install an light strip interconnect cables. It is best to purchase a length of strip that is more than your application requires. For example, if your project requires 8 1/2 feet of strip, we recommend purchasing 9 feet of strip to ensure that you have everything covered.