Chances are, the computer, tablet or phone that you are using to read this post is powered by electricity produced by coal, natural gas or nuclear energy. Currently, the overwhelming bulk of power for the nation's electrical work is generated in large, centralized plants that use those three fuels. However, with the rise of renewable energy sources as well as a transition to modern and responsive grid technology, the country's electric infrastructure is poised to move toward a more dispersed generation system. Read on to learn what that means for you.

Huge Generating Plants Vulnerable to Disruption

According to the Energy Information Administration, 39 percent of the nation's electricity comes from coal, 27 percent from natural gas and 19 percent from nuclear fuel. In addition to being non-renewable, the three fuels that make up 85 percent of our electricity production also work best in massive power plants that produce large amounts of power, which is then sent out long distances through the grid to power our electrical work.

This large-scale generation has advantages – economies of scale, for one – but it is also inflexible and can be subject to disruption. An event that causes a plant to shut down or interrupts its distribution, for example, could leave entire communities without power. The grid is also, in effect, a one-way street – electricity leaves the generating plant and arrives at your home, where it is consumed.

Renewable Energy and Advancing Technology

However, several changes are occurring that will create a more dispersed and flexible generation system to power our electrical work. For one, the share of renewable energy sources, which don't require large generating plants, is continuing to grow. Solar panels are popping up on rooftops across America, while wind power could provide as much as a third of the electricity in the country by 2050. In addition to being far better for the environment than fossil fuels, these power generators can scale down to even a household-by-household basis.

The other change that is facilitating a more dispersed power generation system is an advance in technology in the electric grid, which allows power to flow in two directions, both to your home and away from your home. That means that electricity can be generated almost anywhere and then zipped along the power lines to wherever it is needed. Breakthroughs in power storage technology will also help guide us toward a future where the power for our electrical work is created when and where it's needed, freeing us from the constraints created by large, inflexible power plants.

Generate Electricity at Your Own Home

If you want to learn more about adding renewable power sources to your property, or need any other electrical work done, call up an expert electrician today.

Electricity is something we can’t manage without, but it’s crucial to take due care while using it. When it comes to electrical safety, you can never be too careful, and it’s important to ensure that the electrical systems, wiring, fixtures and fittings in your home have been installed by a licensed and insured electrician.

The same level of care has to be maintained when you are using any electrical appliance and you must ensure that you don’t overload the system while operating any of them. It’s very common for people to use extension cords in their homes and not many property owners feel these electrical accessories should be included in their safety checklist.

If an extension cord is used continuously under the wrong conditions, it can potentially lead to electrical shock or even an electrical fire. We have put together a few extension cord safety tips:

The other important thing you should keep in mind is that you should never join two or more extension cords together. This can be very dangerous because that can cause a drop in the voltage in the cords; this reduces the effectiveness of the circuit breakers and safety switches in your home; in turn, this can result in an overload.

If this occurs, the strength of the actual current that’s flowing in the cords can damage appliances which can create a fire hazard & potentially cause electrocution. While an extension cord can be quite helpful in effectively delivering power to points where you need it; never forget that using an extension cord is just a temporary measure and shouldn’t be used to provide permanent power.

Some would argue and say that they have been using extension cords for years without any trouble; however, that doesn’t really mean it won’t compromise the electrical safety in your home, when you plug it in the next time. If you find you are using too many extension cords around your home, it’s an indication that there aren’t enough power outlets in your home, to cover your needs.

It’s best to call in an electrician, discuss your electrical requirements and get them to assess whether the existing installations meet them. For more information, simply speak with the experts at Allround Electrical and take their advice on various aspects of CBUS installations. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263

If you are looking at your electricity bill and trying to determine where your money is going you need to know what appliances are using the most electricity. This will help you make better decisions about where to cut back in your home to truly make a difference on your electric bill. A Pasadena electrician has a list of the top 10 energy users in your home. If you would like to learn more about buying energy efficient appliances or other ways to save on your electric bill, give The Electric Connection a call today.

1-The biggest electricity user in your house is your air conditioning. With the height of summer just around the corner, it is time to start thinking of better, more energy efficient ways to cool your home. You can have a ceiling fan installed by an electrician. Pasadena homeowners can still stay cool without relying solely on the air conditioner.

2-Your refrigerator is next on the list. While you can’t really do without a refrigerator, you can invest in one that is more energy efficient than your existing one.

3-Space heaters, if you use them, are also big electricity users. Consider investing in an infrared heater.

4-Water heaters use a lot of electricity. You can reduce the need for the heater to constantly heat the water by ensuring it is insulated. Reduce the temperature on your water heater a few degrees as well.

5-Lighting is your next issue to tackle. You can save money on lighting by switching to LEDs and CFLs. Making sure lights are off when nobody is in the room and installing dimmer switches are also helpful.

These are just a few things you can do to reduce your electric bill. Making a few changes today can start saving you money on your next electric bill. Give The Electric Connection a call today to schedule your ceiling fan installation.

A gentleman named Houston sent me this. What do you think about it? Does it apply to electricians in Los Angeles and around the Untied States?

We are nearing a renaissance of electrical contracting. Software Advice, a website that reviewselectrical estimating software, thinks the electrician will soon transition into an “energy contractor” to meet demand of the growing green construction market. This growth is being fueled by increased adoption of green and renewable energy technologies among homeowners and corporations.

Who will be there to retrofit these buildings? Electrical contractors will play a major role in these upgrades. However, they’ll need to “green” their skill set in order to take advantage of opportunities.

To start, electricians should get versed on electric- and energy-related LEED credits. LEED stands for “Leadership in Energy and Environmental Design,” a program developed by the U.S. Green Building Council to rate green buildings. LEED projects are growing just as fast as the rest of the green construction market, so this is one of the areas electricians will be able to “cash in.”

Additionally, electricians should consider becoming a LEED accredited professional (AP). A LEED AP is a certification given to individuals once they pass an AP exam. The credential signifies an advanced depth of knowledge in green building practices. LEED projects get an extra point for having an AP on the job, which could be a selling-point when bidding on jobs.

To read more, visit: The Coming Renaissance of Electrical Contracting