We’re excited to announce that we now offer Printed LED Panel Lights for custom backlit signs, trade show and exhibition displays, product advertisements and branding, mobile displays, logos, and so much more! Our user-friendly panel building tool lets you configure a panel in four easy steps. Simply choose your ideal panel size, upload or select an image, edit your image, and choose a frame. You’ll be able to see your panel as a finished product with all chosen options. Compatible accessories will be listed before you reach the checkout page.

There are many aspects of our Printed LED Panel Lights that make them unique. Check out the information below to see why they’re so special.

We offer three types of panels: wall-mount, stand-alone, and 12-volt. These LED panel lights are available in a variety of sizes and are designed specifically for their intended applications.

Stand-alone panels come with a plug and a wire enclosure box. They can be used almost anywhere for any purpose from backlit signs for product showcasing and branding to window signage and custom logo displays on desks and shelves. These panels are available in 2′ x 2′, 2′ x 4′, and 1′ x 4′ sizes.

Regardless of bends, twists, or turns, Example of a cut line on LED strip lights

2. You will now have two LED strip lights. Carefully peel back the end portion of the paper strip covering the strip’s adhesive backing, and then remove the 3M VHB adhesive from the solder pads on the bottom side of one of the strips. The strip with its adhesive peeled back will be the top strip when soldered.

5. Align the non-tinned strip segment (strip with adhesive removed) directly over the newly tinned pads, and apply heat. Hold the soldering iron in place until the solder remelts and begins to flow. To strengthen the bond and improve visual appeal, a small portion of solder can be added to the top pad.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split and solder a run of non-weatherproof two-conductor or connecting wires. Peel away the blue wire so that only the positive (red), negative (black), and control (green) wires are left.

*No wires should be peeled away if you’re joining single-color or standard RGB light strips.

3. Properly heat your soldering iron. For best results, clean and tin the tip of the iron immediately before soldering. To tin the iron, touch solder to both sides of the iron’s tip.

4. Next you will need to tin the solder pads on both ends of the split strip light. When soldering, always apply heat to the target area on the strip and not directly to the solder. Once sufficient heat has been applied to the area, start introducing solder.

The LED strip lights are now connected, and power should flow through the entire length of the strip.

The following steps demonstrate how to split, solder, and reseal a

3. Follow steps two through five located at the top of this post for soldering a standard RGB strip light.

4. To reseal the strip light, apply

The LED strip lights are now connected, and power should flow through the entire length of the weatherproof strip.

For many homeowners, the presence of a smoke alarm within the home equates to pretty much background noise. You might ask about it upon purchase, or make sure there is one within your home that may or may not work. This shouldn’t be the case! A smoke alarm just might be the single factor between heading off a dangerous situation and major property loss. At Hoffman Electrical, your safety always comes first, and we would like to take a moment to let you know why adequate smoke alarms within your home are of the utmost importance to your safety.

For professional  Federal Emergency Management Agency (FEMA), there are nearly a million home fires in the United States each year. That’s nearly one in every three hundred United States homes! That is a concerning statistic, and damages include property damage and loss, and possible injury or loss of life. Ensuring you have the best chance possible of detecting, preparing for, escaping or mitigating a home fire is absolutely crucial.

If you’re in need of fire alarm installation, don’t hesitate to call Hoffman Electrical! The longer you wait, the greater the chance of extensive property damage and injuries! When you choose Hoffman Electrical, you receive:

]]>

Piano Lamps Sing and Make Sweet Music at Capitol Lighting!

Ambient lighting in a piano room or formal living space is the key note needed and piano lamps can make this room sing and make sweet music!  Capitol Lighting offers a beautiful selection of piano lamps and picture lighting for any room in your home. Make a grand statement with modern piano lamps on your baby grand piano! House of Troy lighting makes any piano sing and they offer picture lighting in a wide selection of finishes to choose from such as polished brass-gold, black and even satin nickel brushed steel.

Create the perfect ambient lighting in your formal living room or piano room with House of Troy lighting.  Piano lamps and picture lighting is the key note needed to create a soft and inviting glow in a formal space.  Shop Capitol Lighting online for all of your formal lighting needs and start creating sweet music with House of Troy lighting.

The search for commercial lighting systems can be confusing, misleading, and overwhelming at times. With all of the different terms, labels, and technologies being used how can anyone expect you to make any decisions with all of that going on?

Well, this post is going to at least relieve your confusion about DesignLights Consortium vs EnergyStar approved and qualified lighting products. There is a difference, and you need to be well aware of what it is when you are looking into a new lighting system for commercial Click here to read it, then come back to finish the rest (opens in a new window)!

The major difference between DLC and EnergyStar is that DLC is only for commercial lighting products while EnergyStar is more focused on residential purposes and applications, with a minor hint of commercial lighting in there as well. This makes DLC the more “go to” organization when it comes to commercial lighting qualifications as they are seen as the experts on commercial lighting products and technologies.

Anyways, when it comes to becoming EnergyStar qualified for a lighting product, a product needs to pass these (along with others) guidelines to be able to be EnergyStar qualified:

Conclusion

After this quick, simple, and brief overview of the differences between EnergyStar and DLC; we hope you’ve found some light on the topic (get it, light).

In a general sense, most of your commercial lighting purchases will include DLC qualified products, especially when buying for warehouses, factories, parking lots, street lights, and the like all except for those listed.

Are you confused on any point? Have any comments or questions? Comment them below and we will surely find an answer or response!