Electrical jobs should never be turned into a DIY project, unless you have formal training and experience in the field. While electricity is extremely useful and necessary, if it isn’t handled correctly, it can be pretty dangerous too. If you get a novice to handle the job for you that can result in overloaded circuits, poor wiring connections or even faulty grounding, which can be extremely dangerous to you and your family and result in a fire outbreak as well. Here are some common services for which you would need to call in an electrician:

The main electrical panels provide electricity to your entire house. If you have older panels with fuses and older wiring, those may not be able to bear the load of any new appliances you decide to install on your property. The latest electrical appliances tend to add heavy loads on the system and your older wiring installations won’t be able to support those loads. If you are getting new appliances, call in a licensed electrician to test and inspect the wiring and circuit breakers on your property.

If you need any new outlets installed or need existing ones converted to USB ports, you would have to call in an electrician for the job. Oftentimes, electrical codes necessitate that a minimum of 1 outlet in your kitchen and bathroom be a GFCI outlet. These are specifically designed to shut off the power in case there is an imbalance in electricity or if water comes in contact with any of the electrical equipment or fittings; this helps in preventing shock in these areas.

It’s important that there be certified and licensed electrician should handle. They will take all the necessary precautions while doing any kind of electrical work on your property.

Are you in need of a licensed electrician?  Custom Electrical Services has licensed electricians in Ankeny Iowa 24/7.  Our electricians have the skill and knowledge to handle any electrical task in your Ankeny home or business.

Have an electrical emergency?  We have electricians on call 24 hours a day 365 days a year.  Our trained professionals can help with all your electrical emergencies.  Some of the most common electrical emergencies we see are.  Tripped breaker, loose electrical connection, bad or tripped GFCI, power surges or lighting strikes.  We can handle virtually any electrical emergency in Ankeny.  Our service electricians carry a large variety of parts.  If they do not have a part needed on their van we have access to several supply houses in the area with after hours access.

Custom Electrical Services has an A+ rating with the Better Business Bureau.  We work hard to make sure every job is done right the first time and make sure you are completely satisfied.

We offer upfront pricing so you know exactly what your electrical project in Ankeny will cost before the work begins.  We provide you with a flat rate cost so the price to you doesn’t change if the job takes longer than expected.  Our electricians can quote the job to you upon visual inspection at your Ankeny home or business.  In most cases the job quoted can be done at the same time as quote or a different time of your choosing.

Custom Electrical Services wires on average over 200 new homes each and every year.  And has already reached over 250 new construction projects in the beginning of the 4th quarter for 2015!  Our electricians have tons of experience and can handle any electrical task for your Ankeny project!  We know the latest trends in lighting and have access to the newest electrical products.  Or we can update your Ankeny home with products such as LED lighting, or install a whole house surge arrestor.

Or even install a standby generator!  Have a parking lot light that needs some attention?  Or that high light that even a ladder will not reach?  We have bucket trucks with certified electricians to get your Ankeny project completed right the first time.

A flood can happen at anytime in your house. It doesn’t always have to come from a river or creek that has burst over it’s bed and turned your neighborhood into a watery community. Heavy rains can be an issue, but if you live near a water source, you are prepared for such eventualities. What you can’t always prepare for are things like burst pipes and water heaters that have failed. If you are not home when either scenario happens, you could walk into a huge disaster. Your first call may be to a water damage specialist and your insurance company, but you also need to call an electrician in Beverly Hills. We all know water and electricity don’t mix! You can rely on the team at The Electric Connection to help you get your home back in order so you can get on with life after a flood, whether it is minor or a big one.

If your home has experienced any kind of water damage, it is crucial to your safety and the overall safety of the home that you have the electrical wiring inspected by an electrician. Beverly Hills homeowners can have water damage happen for a variety of reasons. If your home has been flooded with more than a foot of water and the water has been allowed to soak for more than a few hours, you are probably looking at replacing the wiring in the house. If it was a minor flood with the water only rising a few inches, you will still want to have an electrical inspection to ensure all of the wiring is still in good shape.

When you hear you need to replace wiring, it can be a jaw-dropper. However, keep in mind, the walls will likely need to be torn down and new sheetrock put in due to the water damage. This makes it much easier for your Beverly Hills electrician to complete a rewire and it will be much faster. It is far too risky to assume the wiring was untouched after a flood. Call The Electric Connection today if you need an electrical inspection.

If you are interested in learning everything about electricity, you should start by understanding the basic components that make up any electrical design and how they work. Think about how the great pyramids of Egypt were built using just blocks of rock. The rocks themselves were nothing, but when combined with careful design they formed such grand structures!

Similarly, you need to know about the basic electrical components and how they work together to create wonderful modern electrical systems. Below you will find information about the most common electrical components:

The very first component that you should know about is the resistor. It is fairly easy to assume that a resistor, as the name suggests, will resist electricity that flows through it, and you would be correct in that assumption too! Any situation that demands the flow of current to be controlled at a desired level will require a resistor.

Here are two scenarios that better explain what a resistor does. In both cases, we will be turning on a LED:

Scenario 1 – Without Resistor

Scenario 2 – With Resistor

If a resistor is like a cushion that is used to control the flow of electricity, then capacitors are like small rechargeable batteries that store small amounts of charge in them. Capacitors do two things at the same time:

By so doing, they are able to stabilize almost any circuit. There are two types of capacitors that are primarily used:

I briefly alluded to LEDs in the scenarios that were used under “Resistors” above. LEDs are just like bulbs except that they are extremely reliable. You can find them on practically every appliance in your home that features some kind of an indicator light. A typical LED bulb can last decades with no sign of dying.

Since they are so reliable, they are used to indicate the state of current at any point in a circuit. An important task like checking the output voltage or current on a circuit becomes simpler with these light-based indicators.

The resistors, capacitors, and LEDs are the simple stuff in electrical circuits. Now, let us talk about the first complicated component – the transistor. Transistors are used to build complex electrical systems, such as amplifiers for instance. A simple way to understand transistors is to think of a switch. A basic switch has an “on” and an “off” state. These are controlled by the position of the switch, which is changed manually.

A transistor is a more advanced switch that has multiple output states. Unlike a switch, you cannot change these states manually. The only way to switch the transistor between various states is to run current through it. By controlling the current that flows through the transistor, you can control the output state to achieve the results you desire.

Now that you have the holes for lamp sockets, we need to start wiring the lamp sockets.

Kevy, an eCommerce Marketing Automation ​company that specializes in automating and personalizing the shopping experience. ​ ​​Kevy gives online retailers the tools they need to help visitors find the products they care about most. When she is not at Kevy, Brooke and her husband Ryan love creating new projects and are always looking for a new DIY opportunity around the house.