Whether you are a contractor working for well-to-do clients, a lighting designer, a home remodeler, or just a fan of carefully planned home design, luxury bathrooms are fun and engaging to admire. Especially when you see something new or innovative that catches you off guard. “I never thought of THAT,” you might say. Well, I’m here today with something good to distract you from whatever else you could be reading or doing – a stream of 11 large, high resolution photos of stunning luxury bathrooms. The topic of focus? Lighting, of course. Check out these awesome luxury bathroom lighting solutions.

1. Cove Lighting Is Ultra Modern Design’s Best Friend

Well, first of all, this bathroom has a sauna in it. It’s awesomeness should be momentarily acknowledged. Now that that’s out of the way, check out the way the cove lighting brings the beautiful wood tones to life. The recessed lights provide great general light. Like the simple angular design motif, the recessed lighting here is not meant to call attention to itself but to do its job humbly. That’s a sign of restraint in design that can really work to create a successful final product.

3. Cove Lighting with Mini Recessed Lights

Oh, look, it’s the old sconce on copper trick! I jest: This is not old hat but highly innovative. I love all the shiny surfaces in this luxury bathroom. That tub isn’t half bad either, and it looks especially alluring with the inconspicuous can lights and cove lighting above it. Full disclosure: I thought that thing on the right was a light bulb, but it’s just the reflection of the ceiling above the tub. That’s the thing about shiny surfaces: They reflect light. The light in this luxury bathroom is really fun.

5. Mega Modern Chandelier

This is just so simple and so perfect. This kind of design is almost difficult to talk about. Instead of laboring over how to say exactly why this design is so cohesive and successful, I think I’ll let it speak for itself. Just notice how that little bit of amber colored cove lighting draws the eye. What a nice focal point, whose position at the back of the room makes the whole luxury bathroom look bigger and more sweeping. The warm light scallop from the recessed spot lights above the tub is nice, too: Just a splash of warm light makes this place very inviting.

7. Recessed on Mirrored Ceilings with Scallops

Again, modern design employs cove lighting. Are you noticing a theme? If you’re trying to create a more modern look in your home, adding via via deehouzz.com

There’s kind of cool thing going on here. The vanity lights match the sconces over the tub, and their shape matches the arched ceiling, large window, and even counters (notice how they bulge out). This luxury bathroom may not be the most expensive of this collection, but it does transmit one very important lesson: Every design element must have a purpose. If all these shapes line up, it’s because careful thought has been put into seeing all the design elements as parts of one visionary whole. For lighting enthusiasts, this means that the shape and look of the fixtures are important in addition to the warmth and color rendering of the light source. I hope this and the other photos of the best luxury bathroom lighting I have recently seen has inspired you and given you a place to return if you’re ever involved in a bathroom lighting project.

Are you unsure about whether you should buy a surge protector this winter? If you’ve spent a lot of money on the electronics in your home, risking it all by forgoing the right protection can be a costly mistake. The winter months bring with them an array of storms capable of rendering entire neighborhoods powerless. With all these outages, power surges are a common occurrence during the coldest time of the year.

If you own your home, it is essentially yours to do as with you please. You are not restricted to what colors you paint the walls or how you decorate your home. For those who don’t live in neighborhoods with strict home covenant laws, you are also free to make your home a little bigger. Every square foot of livable space you have in your home adds value. The cost to add the space is far lower than what the additional square footage is actually worth. Home additions are an excellent way to make a home big enough to suit your family’s needs, while adding significant value. This is definitely a big project and will require the services of a trained, professional Pasadena electrician. The team at The Electric Connection is available and can help you iron out the details of your addition.

Additions can be anything from a single bedroom add on, adding on to an existing room in the house, transforming a basement or even something a little more elaborate like installing a second story. Adding mother-in-law apartment’s are also a common home addition that seem to be growing in popularity. These are all possible with the help of an electrician. Pasadena homeowners that are big on DIY can certainly do a lot of the construction of the addition, but the electrical wiring will need to be completed by a licensed professional in order to meet city code standards.

You will also feel better knowing the wiring has been completed by an electrician in Pasadena. If you have hired a contractor, you can request to use a particular electrician that you have researched and are comfortable using. This project is going to make your life a little easier and will increase your investment into your home. Don’t leave it to anybody you don’t trust. Give The Electric Connection a call today.

LED sign lighting provides years of illumination and low energy costs. sign modules that consume 50mA of power each. Required materials differ depending on sign size, module size, length of wire between modules, current draw, and lumen output.

Materials:

1. First, measure your sign. Although we recommend spacing module rows 3 inches apart, it’s ultimately up to you. If you want a brighter sign, place them closer together and vice versa for a dimmer sign. With the recommended 3-inch spacing, a 4-foot square sign would need 150 modules (15 rows of 10). Again, the quantity of modules needed  is based on many factors and can differ.

These LED sign modules are available in custom lengths of up to 20 modules per strand. Order 60 feet (4 feet x 15 rows) of stranded modules, and cut the strand after every 10 modules. Each strand can be cut to make two rows.

2. Next you’ll need to order a power supply that’s rated for the combined wattage of all sign modules. To ensure that you don’t overwork the power supply, confirm that the total wattage of your modules is at least 20 percent less than the power supply’s rated wattage.

An easy way to calculate this is to multiply the total wattage of your combined lighting by 1.2. In the 4-foot sign diagram, there are 150 modules with a current draw of 50 milliamps (mA) each. Since current draw is given in milliamps, multiply that number by voltage and move the decimal 3 places to the left to get wattage. This module consumes 50 mA and has 12 VDC operation, so it consumes 0.6 watts (50 x 12 = 600). Next, multiply 0.6 by 150 to get a combined wattage of 90 and multiply that number by 1.2 (90 x 1.2 = 108) to determine which power supply you’ll need. Since the result was 108, you will need at least a 120-watt power supply.

3. Next on the list is wire to connect all your sign module stands to the power supply. For a 4-foot sign, you’ll need 4 feet of 18-gauge two-conductor wire to serve as your main line plus enough to cover the distance between your power supply and where it will be wired into an electrical system. You’ll also need dual-channel T-tap wire splice connectors for an easy connection to your main line.

Before you begin working on your sign, turn off power to the area.

4. If there isn’t one already, drill a hole in the back of your sign as an exit point for your wire.

5. Use a tape measure or ruler to plot your row spacing. Leave space on one side of the sign for your module-to-main-line connections. Mount the sign modules using their double-sided adhesive and/or screw holes.

6. Insert the end wires of each sign module row into the T-tap splice connector, and clamp the other end of the connector onto the main line. The splice connectors eliminate the need to strip wire insulation.

7. Use double-sided foam tape to secure each T-tap splice connector to the inside of your sign.

8. Reattach your sign’s front cover.

9. Connect the main line to your power supply, wire the supply into your electrical system, and restore power to the area.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.