Early in the month, American Airlines Flight 1420 crashed near Little Rock, AK. This crash, along with a few others that took place soon before and after, inspired research into the deleterious effects of sleep deprivation on pilot safety.

3) A Whole, Whole Lot of Drug Money

In June 1999, George Bush announced his candidacy for the office of President of the United States of America. So much was about to change in our culture during the next 8 years.

5) Lord Stanley’s Cup

via www.moviesonline.ca6

In June 1999, Stephen King got hit by a car and was flung 14 feet while walking on the shoulder of a road in Maine. What’s the name of that Stephen King book about the car? Oh yeah, Christine. Any connection? You never know. But I’m sure King was thankful Kathy Bates didn’t find him after the accident.

7) The Weird Looking Predecessor of the MacBook Is Born

That mildly annoying yet overall charming goofball Austin Powers (Mike Myers’s colorful character) graced the cover of Rolling Stone in June 1999, exuberantly celebrating the sequel to the original Austin Powers blockbuster smash hit. Smashing, baby!

9) Adam Sandler Tones It Down a Little

The universe’s hippest couple, who, of course played in a rock band together, hit the popular scene with their debut album in June 1999. Then, they became insanely famous. And then, thirteen thousand two-piece rock bands, featuring only guitar and drums, were born. I think now, 15 years later, we are finally beginning to see the decline in that questionable trend. Bass matters, people.

11) That Kid from Walking Dead Was Born

Venus and Serena Williams, two twin females from a socioeconomically disadvantaged place, won the Grand Slam female doubles event for the first time. They were the second sister team to win a Grand Slam event since 1890. This is the kind of thing that just makes you smile. These are some of the best ever to play the sport.

13) MORE TENNIS!

In most offices, hallways, and other lower level and flat ceiling environments you will find some sort of tube lighting in place. The most common technology that is found to be used is currently fluorescent, but after this post that might slowly change for some because this alternatives to fluorescent office lighting and all of those other uses listed above is going to change your mind on which technology is the truly efficient one.

Although it is completely harmless while in the tube itself, accidents always happen. When a fluorescent tube is broken, a LED fluorescent tube alternative, you will skip this issue entirely because LED technology does not require any sort of mercury to work!

While LED technology is pretty much good to go in a greater range of temperatures, fluorescent lamps only works at it’s peak performance when it is in room temperature type environments. So LED technology is much more flexible in which temperatures it can operate properly at, fluorescents are only suitable for inside only applications. But even then, LED still wins for all of these other reasons listed on this post! And a thing to remember is that fluorescent technology isn’t better than LED is indoors, it’s just that it only works optimally at room temperatures. But when you replace fluorescent light with LED, you still get all the benefits that LED brings and they aren’t picky about the temperature at all.

When you hear the words non-directional, what exactly does that mean to you? Well, in the world of lighting it basically means that such fixture emits lights 360 degrees (or in all directions). This causes 30-40% of all the light being emitted by a fluorescent tube to be wasted due to the trait it carries of non-directional emission of light. With LED, it has directional lighting which allows you to direct the light where it needs to go and isn’t going to waste being emitted 360 degrees.

Let alone all of the other benefits that a a return on investment when you start looking at what contact us with any questions you have!

Technology is advancing at a dizzying pace. What used to be the ‘latest’ and ‘most advanced’ devices yesterday becomes redundant today. When people embrace any technology, they do so because it adds convenience, comfort and safety to their lives in one way or the other. When it comes to your home, all these three aspects matter a great deal. It’s why many people are now veering towards the smart home concept.

Sure, many homeowners already have Internet-based security systems and landscape irrigation systems that are connected to timers etc; but smart homes are designed and set up to do much more than that. Having a smart home is a lot about Wi-Fi connectivity and more. Take a look at some concepts; this will help you create a plan for your smart home.

It’s not uncommon for companies that launch smart home products to say that connecting their devices to the Internet is a breeze. Sure, they are bang on spot most of the times, but what actually matters a great deal is the Wi-Fi connectivity in your home. These are some of the things you will have to keep in view while planning your smart home:

This is vital, and it’s something you should keep in view while planning your first smart home. The longer the distance the radio waves have to travel, more the connectivity issues. The best way to overcome this kind of an issue is to install the Wi-Fi router at the center of your property and on the ground floor.

You will find a number of products which claim they are able to extend the Internet connection in your home. The simple fact is that multimedia over coaxial power-line adapters, network extenders etc tend to slow down the signal by around 50% and that reduces the consistency of the network. Of course, you won’t find any issues with driving a motion sensor or a smart bulb; however, you might just find it challenging to stream a movie to your tablet/laptop, only because it can’t figure out which Wi-Fi router it should connect to.

At times, installing a network of Ethernet cables turns out to be the best solution. You can use cable runs to install your smart home hub devices in spots that are more accessible. The devices that are connected to these hubs will function more smoothly if you do this. If your home is already wired for telephones, hardwiring for Ethernet won’t be too difficult. You will need to speak with your electrician and check whether he would be able to run an extra cable to the point you need it at, without too much of drilling and sawing.

When you are planning your smart home, ensure there are sufficient power points at different places in your house. While certain devices may be battery-powered, many aren’t. So whether it’s a Wi-Fi router/extender, web security camera etc, you will need a power point to plug them in. And of course you don’t want power cords dangling all over your smart home.

Very simply put, if you are building a new smart home or remodeling your existing one, sit down and plan not just for the current smart devices you plan to install, but for future ones as well. Map out a detailed plan and get some advice from the installer too. Coming back to the first point – focus on getting a very good Wi-Fi router and ensure its positioned at the right point on your property.

Very importantly, get a professional to do all the wiring work once you have your entire smart home plan in place. For more information about smart home device and hardwiring solutions, call Allround Electrical at 1300 169 263. You can also drop us a line via email or by filling out this contact form.

Thanks for reading,1300 169 263

Surge protection is part and parcel of every electrical system and many devices such as HDTV’s and computers are plugged into surge protection devices. However, it’s not necessary to have individual devices to protect the different appliances or equipment in your home. It’s possible to get a centralised surge system installed into your property’s main electrical panel; this turns your home into a single large surge protector.

This kind of a system offers a significant amount of convenience. Most homes nowadays have a large number of appliances and equipment ranging from washing machines, dishwashers, electric stoves, ovens, refrigerators, HVAC systems, home PCs, printers, scanners, pool equipment, hot water systems, outdoor lighting, irrigation system, home entertainment and music system and more.

Based on the number of equipment and appliances you want to protect, a centralised surge protector can be much more affordable than just getting individual surge protectors installed. This also extends protection to all the other larger appliances in your home, that don’t already have any surge protection adapters. The different types of surges that can occur are:

The long and short of it is that surges can occur at any point of time and this is what makes it important to have a centralised system that will provide protection to all the equipment and appliances in your home.

If you notice the lights in your home flickering, that is generally caused by an electrical surge. Typically, these types of surges won’t burn out your appliances and devices, but they do have a negative impact on the longevity of this equipment. When it comes to getting surge protectors installed, the high-cost of the damage caused by electrical surges to our electronic equipment and appliances should be the topmost priority.

Current day home appliances such as ovens, dishwashers, refrigerators etc. are becoming increasingly sophisticated and operate on smart technology. They have a large number of closely intertwined, sensitive components; an imbalance or impact to one of them has the potential to impact the rest of the components too. This holds true for larger systems such as the hot water and HVAC systems too.

Even when these systems aren’t being used, major electrical surges can cause heavy damage to them and will shave years off of their operational lives. Without you realising it, this can result in thousands of dollars of losses in the duration you live in that home. In some cases, a massive power surge can cause irreversible damage to your HVAC or hot water system, and replacement becomes the only option you are left with.

Keeping all these aspects in view, it becomes extremely important to ensure that you have a high-grade, reliable surge protection system installed in your home. We at Allround Electrical can provide excellent electrical upgrade maintenance solutions to commercial and residential customers.

We will survey the space, make note of all the equipment and appliances on your property and will provide solutions that are best-suited to your needs. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263