If you’re longing for a bulb that’s going to save energy and that lasts, this LED bulb replacement guide is a great place to get a feel for the type you might need. Other than finding a bulb that fits the socket, has the correct voltage, and meets wattage requirements, there’s no list of rules as to what bulb you should use in a certain fixture. This guide shows that even the same type of fixtures can require or accept different bulb types. LED replacement bulbs are available in a variety of wattages, intensities, voltages, and with different base types; they can even emit different colors of light. You have the freedom to choose a bulb that fits your needs, and there are plenty of available options.

Clicking each picture below will direct you to a page of similar bulbs. Keep in mind, this post just touches the surface of available LED bulbs. If you don’t see what you need, use our site to see hundreds of lighting options.

Track light fixtures are found in many homes and allow for aimable illumination exactly where it’s needed. These fixtures almost always contain MR11 spotlight bulbs. In addition to track lights, these bulbs are often used in recessed, pendant, display case, and desk light fixtures. MR16 and MR11 LED replacement bulbs have GU10 or GX5.3 bi-pin bases and are available in a wide variety of styles with many LED configurations.

Choosing a Contractor

The first step toward an electric job is to find a contractor you feel comfortable with. You’ll hear recommendations from friends and neighbors and have several come out to place a bid on the job. The best price or the lowest price doesn’t necessarily represent the best or worst quality of work to be provided. You have to look through their portfolios, check with their references, consider their experience and how long they’ve been operating locally, and to some extent trust your intuition as to which contractor seems like they’ll do the best job.

Repairs, Rewiring, and Upgrades

We all know or at least heard that converting from Metal Halide (High Intensity Discharge) to LED will save you money.

But how much? Are there any other reasons or difference you should know about?

In this article, we break down all the factors that you should be aware of before making a decision to convert from Metal Halide to LED. Here are the 9 reasons we think LED wins over Metal Halide.

Let’s take a look at the information on a typical 400 watt metal halide bulb. While specifications may vary, a visit to a popular online website that sells Metal Halide bulbs shows that a brand new bulb has the following specifications:

We have just as many customers wanting to convert to LED because of maintenance savings as they do for energy savings. Think about what we discussed, over the life of the LED retrofit kit, a customer would have to do 5-6 Metal Halide replacements. The higher the installation height, the higher the cost of replacement. And if you have a facility loaded with lights, this becomes a significant budget amount every year that you must take into consideration. Now, we know that reduced maintenance time on lights does not translate into dollars saved because it is highly unlikely that people will lose their jobs over the fact there is much less work to do. However, these people will have time to now work on things that matter, like fixing the machines that make the company money instead on replacing lights that cost the company money.

When you take a measurement of light with a light meter, it reads lumens. And this measurement of all the lights that contribute to the light at that location creates a measurement called foot candles. But let’s think about that light that is being measured. Metal Halide creates all sorts of light, in all spectrum’s, visible or otherwise. This includes UV and IR spectrum’s, visible to the measuring device but not visible to the human eye. LED, on the other hand, does not produce UV and IR. Therefore, its readings using the same light meter is only picking up visible spectrum’s.

So there is a fun little test you can do. Have 2 light sources, LED and Metal Halide. And first ask, which one is brighter? And if the right LED source was selected, they should say LED. And then use a light meter, and the light meter may say the Metal Halide area is producing more foot candles. And so now you know part of the reason, but wait, there’s 2 other pieces of information you need to know.

Click here to see our infographic on Retrofitting vs Replacing.

Conclusion