Electrical motors are devices that convert electrical energy into mechanical force. They operate on the principles of electromagnetism, using the interaction between winding currents and magnetic fields to generate force. Some motors, like those used in the transportation industry can reverse the effect and generate electricity too, converting force into electricity.

Many industrial plants attribute over 70% of their power consumption to motors, so even a slight increase in efficiency can dramatically cut energy spending and improve profits too.

We use so much electricity, and do it so casually, that we don’t tend to stop and think about the outlets that provide us with our electricity very often. In fact, most of us only give outlets much thought when we are cursing the fact that there is not an available outlet when our phones are about to die. Do not be fooled by their ubiquity, though; our electrical outlets are among the most important features of our electrical systems. That is why it is so important that you know for certain that your outlets are appropriate for the task at hand. Below you’ll find some information regarding GFCI outlets. If you require any GFCI outlet services in Boston, MA, contact FB Electrical Services to get started.

A GFCI (ground fault circuit interrupter) outlet is one which provides homeowners with ample protection from electric shocks and, potentially, fatal electrocution. You would likely be able to identify one if you knew what you were looking for; these are the outlets which feature both “test” and “reset” buttons on the outlet face plate. GFCI outlets measure the electricity put forth against the electricity being used by the device in question. If there is a difference between the two levels above an allotted amount, the outlet determines that electricity is finding a way in which to ground itself: potentially through the body of the user. The electricity is shut off nearly instantaneously in such instances.

GFCI outlets are, according to the National Electric Code, now required in all new kitchens, bathrooms, unfinished basements, and in many outdoor receptacles. Generally speaking, it is a good idea to have GFCI outlets installed in any area where water is likely to be present (hence the aforementioned requirements). While not mandated by any law, many homeowners are choosing to replace outlets throughout their homes with GFCI models. Contact us if you have any questions or if you’d like to upgrade your outlets for better protection.

Your computer system is essential to your business. But are you protected in the event of a serious power surge? Most companies aren’t, which means they’re playing with fire when it comes to the essential system that powers their company.

A serious power surge can severely damage your computers, causing thousands of dollars in repairs and replacement—and that doesn’t even account for the priceless data that you could lose. And even aside from serious damage to your computer system, your computers require a lot of electricity, which can cause frequent tripped breakers and power outages, and damage productivity of your office.

The most reasonable solution is to install a dedicated circuit breaker for your computer system. Not only will this protect your computers and your business, but it will improve productivity and give you ease-of-mind. Our licensed, trained electricians can install dedicated circuitry for the computers in your office to prevent slowdown and correct any electrical problems you may experience throughout the day.

Like in any other building, all electricity that enters your office travels through your circuit breaker before being fed into the different parts of your business. Each circuit is protected by a breaker, and to protect against electrical hazards, certain medium and heavy duty appliances require their own circuit or a “dedicated circuit.”

Too many items plugged into the same outlet, or several outlets connected to the same circuit, creates a lot of “noise” that consists of fluctuations in electronic current. This noise can cause problems for sensitive electronic equipment that can be damaged by mini-surges and fluctuations in power.

Without an appropriate dedicated circuit, an appliance may draw more current than the circuit can handle. This can lead to a number of problems, including causing the wiring to overheat and potentially start an electrical fire. Dedicated computer circuitry reduces this danger, allowing you to run your computers without risk of outages or worse.

When considering solar power, most people picture complete independence from traditional electrical utilities by harvesting enough solar energy to provide their home with the amount of electricity it needs to function each day. Many homeowners look into this, only to discover that this large of an undertaking and the cost of solar panels is beyond their means. Rather than looking further, this is the point that most people give up and move on to something else. Fortunately, there are a variety of affordable solar options that can get you started without the need of a large solar array.

If you have considered solar power, but believe it may be too expensive for you, take some time to browse the solar panel info site at. We specialize in solar leasing and other affordable ways to add solar panels to almost any home.(Read More)

One of the main stays in Industrial and Commercial Lighting has been the Metal Halide Bulb. It is common in Indoor Fixtures, such as High Bays, Canopy Lights, Garage Lights and Low Bays. It is

So you have a Metal Halide (or even High Pressure Sodium) light, and you want to convert to LED. You’ve done your research, you’ve been inundated with marketing materials that tell you what is the most important thing to consider (coincidentally it probably is something they think is important). And now you are left to make a decision. New or retrofit? What new versus retrofit. We sell both. Our retrofits perform as well if not better than new fixtures, but not all retrofit kits can make that claim. However, if your fixtures are old, leak, and have seen their better days, then by all means replace them. It does not make sense to buy a new fixture that includes a retrofit kit inside of it like some vendors will try and sell you. The engineering of some of the new fixtures are fantastic. However, the real reason you would want to consider retrofitting is because you have a significant investment in fixtures. Why not keep that investment? Retrofitting is extremely cost effective, especially our Look for the DLC Premium Symbol, it’s different than the DLC Standard symbol. And that gives you the quick notification that the light you are looking at is the most efficient.

And why does that matter. It’s simple. It will save you a lot more money. Let me do three comparisons for you. First a retrofit kit designed at 97 lumens per watt to replace a 400W Metal Halide bulb, a second at 102 lumens per watt and ours at 155 lumens per watt. Lets keep everything else the same. Cost of electricity, hours of use. The only thing different you will notice is the watts consumed and the lumens produced. For the record, our retrofit kit uses the least amount of energy in this test BUT also produces the most amount of light. We will use 12 hours a day operating time and .12 kw.h electricity cost

Calculation 1: 97 lumens per watt retrofit head, 135 watts, 13164 lumens

Savings per fixture per year over 400 watt Metal Halide: $170.82

Calculation 2: 102 lumens per watt retrofit head, 143 watts, 14600 lumens

Savings per fixture per year over 400 watt Metal Halide: $166.62

OK, so between the competitor options, you are neck and neck, the difference is so minimal you can make your decision based on whose website you like more

Calculation 3: 155 lumens per watt retrofit head, 100 watts, 15,776 lumens (this is our LED Retrofit Kit)

Savings per fixture per year over 400 watt Metal Halide: $189.22

So there is clearly a $18.40 savings over the first LED retrofit option and a $22.60 savings per fixture over the second LED Retrofit option. And, we produce more light!

We have 3 mini LED Retrofit Kits, 30W, 45W and 60W designed to replace up to 250W Metal Halide. We have 3 standard sized retrofit kits, 75W, 100W and 120W designed to replace from 250 Watt to 400 Watt Metal Halide. We have 2 Large Retrofit Kits, 150W and 200W, designed to provide more light than a 400W Metal Halide up to 750W Metal Halide. And we have 3 Extra Large retrofit kits, 280W, 320W and 350W, designed to replace 1000W Metal Halide.