Electric cars are on their way to surpassing your fuel guzzler this year. Check out the latest line-up of electric cars paving the way for 2015. From best-value to the best sports car, electric vehicles are now available for every driver.

At $26,000, the Chevrolet Spark Electric Vehicle (EV) offers a great value in the lower price range. With greater horsepower and torque, this EV provides better steering and speed topping off at 90 mph. When charged, Chevrolet Spark’s battery power results in 82 miles. A great choice for first-time buyers, the Chevrolet Spark EV is a solid buy.

If you need a car for long distance driving, The Tesla Model S goes the distance. In a single battery charge, this EV can drive up to 270 miles. This impressive mileage classifies the Tesla S as the longest driving electric car up to date. At $75,000 the Tesla S is considered the best EV up to date. With the Tesla S, you can finally take that road trip without the fear of battery life.

Perfect for short distance driving, the Fiat 500E is a compact choice for your electric car. Sold for $32,000, the Fiat 500E is suitable for stop-and-go traffic due to its agility. It’s also great for parallel parking, being able to maneuver rapidly into tight spaces. The Fiat 500E is a top pick for those who drive primarily to and from work.

The BMW i3 is unique because of its carbon-fiber make-up rather than the conventional steel. The use of carbon-fiber material makes the BMW i3 lighter and faster, driving at zero to 60 in seven seconds. This EV also contains a range extender, pushing the amount of miles driven from a single charge from 81 miles to 150 miles. It is extremely energy efficient and overall the most innovative of electric cars. BMW i3’s are sold for $43,000, a reasonable price for its quality and worth.

One of the most spacious electric vehicles, the Toyota Rav4 can fit a family of five and has a large trunk to fit all of your gear. This SUV also delivers an impressive range of 103 miles per charge and a horsepower of 154. Relatively fast with a zero to 60 in 7.6 seconds, the Toyota Rav4 is a good comparison to the Tesla S but with the advantage of the much cheaper price of $50,000.

Luxury cars aren’t exclusive to gas-powered vehicles. The BMW i8 is the winner of the 2015 World Green Car Award. Cruising at a top speed of 155 mph and reaching 60 miles in about 4.2 seconds, the BMW i8 is an impressive luxury hybrid vehicle selling at an estimated $137,000. The sleek design, shark grille, and swan doors are sure to turn heads.

The Tesla Roadster is a gorgeous driving machine with 400 miles of driving range. Labeled as the Tesla 3.0, it is the highest quality of Tesla electric cars. Improvements include the battery, which has 30% more energy than previous models. The tires have also been upgraded, resulting in excellent traction for cruising down the highway in style.

A cheaper option for electric cars is the Ford Focus Electric. It is sold for less than $30,000 and boasts 76 miles after fully charging. With a faster charging battery of 3.5 hours and newer gadgets and tech, this stylish electric vehicle is another popular choice for electric car buyers.

On the other hand, a more expensive choice is the Volkswagen e-Golf. Although the Volkswagen e-Golf sells for $35,000, it stands out as the third most efficient EV in the United States. It also gets drivers’ attention for handling like a gas-powered car due to its steady power.

Toyota is leading the way for fuel cell electric vehicles (FCEV). The main difference between electric cars and fuel cell electric cars is the source of energy. FCEV’s are charged with hydrogen rather than a battery. This change allows FCEV’s to drive for 300 miles on a single five minute charge alone. Hydrogen charging stations have made a rise across the nation, and there is even one located at UT.

Anticipation is on the rise for the upgraded Tesla Model X along with new EV and hybrid models for Audi and Cadillac. With the majority of car brands implementing electric cars, hybrid vehicles, or FCEV’s into their line-up, owning an EV is more accessible than ever. With a wide price range from the every day to going the distance, electric cars are most definitely in the forefront of transportation today.

To power your car find a charging station near you. To power your home request an appointment today from Bryant Electric Service.

By: Emilie Sims

Electrical outlets are found in nearly every room of the home, which represents a constant risk if you have small children. According to the National Fire Protection Agency, approximately 2,400 children each year suffer severe shocks and burns from inserting objects into the slots of electrical outlets. Additionally, there are an estimated six to 12 child fatalities each year related to this. Prevent this from happening to your family by childproofing the electrical outlets in each room of your home.

Also known as safe plates, these are additional covers that sit on top of your existing outlet and are held in place by a screw. There is a spring-loaded plastic cover that prevents your child from poking anything inside of the outlet.

Installing tamper resistant receptacles (TRRs) around the home provides a permanent solution to help reduce the risk of childhood shock and injury. TRRs, which look like ordinary outlets, are designed with small, spring-loaded receptacle plates that close off the slots, but open when equal pressure is applied to both sides. This design prevents children from inserting fingers or other foreign objects into the slots, and reduces risk of electrical shock or injury.

There are also several types of childproof electrical outlets that you can choose to install that will provide a permanent way to reduce risk of child injury.

This tamper-resistant outlet contains both a switch and an outlet to plug in devices. The dual mechanical shutter system blocks the insertion of objects into the outlet, increasing your child’s safety.

A ground fault circuit interrupter (GFCI) outlet can be identified by the “test” and “reset” buttons located on the receptacle. A GFCI outlet helps protect you from electrical hazards by shutting off the electricity circuit when it detects an imbalance. The National Electrical Code requires these outlets to be installed in water susceptible areas, such as the kitchen and bathroom. Test these outlets once a month to ensure they are working properly.

These receptacles look similar to standard ones, but the two outlets have the ability to spin 360 degrees. These outlets also allow you to use two large plugs at once.

Visit the Electrical Safety Foundation International and the National Fire Protection Association for more information on keeping your family safe around electrical outlets.

We all know that switching off the lights when not in use is a good thing; but we often leave the lights on even when we leave a room or aren’t using a particular space. This can result in an increase in our utility bills in the long term.

In many urban houses, electricity is wasted more than it is used. There are a number of devices on the market today that save a considerable amount of energy. Installing these controls would help in decreasing your bill in a significant way. Here are some of the devices that help save energy in your home:

These devices are largely used for security lighting installation. They detect movement and will switch on the lights connected to the system. They can be installed on the porch as well as the indoor spaces of your home. Installing different types of security lights in the outdoor and indoor areas of your home can be expensive.

However, installing motion detectors on your lawn or on floodlights directed towards your porch will add to the security of your property and help save electricity as well. The lights won’t consume an excess amount of energy and will be switched on only when any motion is detected. They can be customized to be turned off during the daytime.

LED lights are up to 80% more energy-efficient when compared to traditional lighting. The latter generate heat which results in energy-loss. However, in the case of LED lights, only around 5% of the energy gets converted into heat and more than 95% is converted into light. They are environment-friendly and an 84 watt fluorescent bulb can be replaced with a 34 watt LED and will emit the same amount of light. While the upfront cost of LED bulbs is higher than that of halogen or fluorescent bulbs, they can last for up to 50,000 hours and provide value in the long term.

This is a more technologically sophisticated version of motion detectors. These sensors are specially designed for indoor spaces. They turn on the lights automatically when someone enters the room, and turn them off when they leave. Ultrasonic sensors can pick up sounds and detect if someone is in the room; they trigger the lighting system in the room. But these sensors aren’t of much use in quiet environments. Infrared sensors are useful in these settings as they detect both – body heat as well as movement.

These devices are installed in areas such as basements, where artificial light is needed and there is less of ambient light. These sensors turn off the lights when they detect daylight and automatically turn them on when it gets dark; this saves a lot of energy. Many of these products can be customized to your needs. You can change the level of brightness at which the lights get switched off and on. These technologically advanced devices add to the energy-efficiency of your property.

Simply put, these are electrical protection gadgets that can be used with a wide range of voltages. MCCBs, as they are commonly known, have adjustable trip settings and can hold as much as 2,500 amps in current ratings. They are also used with frequencies that are 50 and 60 Hz and have the following 3 functions: