MyLEDLightingGuide.com’s

Each kit measures 6.8″ L x 4.9″ W x 1.5″ H and weighs about 1.5 lbs. These lights come in 100-277 (Standard) | 347-480 (High Voltage), and can be installed in environments ranging from -30°C to +45°C. Three color temperatures are available: 4000K | 4500K | 5000K (Standard). MyLEDLightingGuide stocks 5000K, but can order in 4000K or 4500K.

These retrofit kits are specifically designed for smaller fixtures that have bulbs up to 400W. Three models are available to match the right output with your application. These lights fit well into wall packs, highbays, parking lot lights, canopy lights, low bay lights, flood lights. In fact, the only limitation is the fixture itself.

2 models make up the Large Series of LED Retrofit Kits, the 150W and 200W. These lights are powerful enough to retrofit and replace Metal Halide and High Pressure Sodium bulbs all the way to 400W-750W. These lights are designed to provide more than the normal 400W retrofit replacement kits. There are times when more light is needed, and these kits were designed to provide more light than our normal retrofit kits designed to replace 400W Metal Halide

Conclusion

Save

Save

Save

Save

Save

Tube lights are found in many applications and environments such as office buildings, hallways, garages, and really anywhere that has a low and flat ceiling. Although fluorescent tubes contain small amounts of mercury and isn’t a whole lot, you still want to avoid the breaking of a fluorescent tube and any exposure to mercury if possible.

Whether you are simply replacing a burnt out fluorescent tube with a new one or are switching over to a new technology (such as LED), there is a proper way to do it. By following these steps along with others that you may find, you will allow yourself to reduce risk of harm for yourself, staff, or whoever is the one physically replacing the tube lights.

Let’s answer some common questions and issues that people seem to face when tasked with this issue of replacing mercury filled fluorescent tubes…

By recycling rather than simply throwing away your tube lights, you opt-in for the environmentally friendly route of switching out old tubes. If you choose not to recycle, you are allowing toxic mercury to freely enter the environment, which of course is not good.

Not only do you prevent mercury from freely entering the environment by recycling, but you also reduce waste. How exactly? Part of the tube is reused for new tubes that will be resold and used. This allows for less waste and this goes back to the saying “Reduce, Reused, Recycle.” So by taking part of fluorescent tube recycling, you allow the process of recycling to continue and prevent waste from entering the landfill!

When taking your tubes out to bring for recycling, this is probably the most difficult step you need to be most cautious with. The best option you have is to be prepared and know what to do if things go “south” as they like to say.

Here is what you can do to prepare for the removal of fluorescent fixtures:

And for one thing that you should always remember for dealing with a broken tube is this: NEVER VACUUM. By vacuuming, you make glass particles go airborne and that is a highly dangerous situation to be in.

For more tips on how to clean up a broken fluorescent or CFL lights, using this tool from Earth911. It allows you to search what you need to recycle and where you are located. So you go to that tool, type in ‘fluorescent’ or ‘CFL’ along with your location and you will surely come across the closest place to recycle fluorescent tubes (along with really anything else you may want to recycle).

If you are in the process of disposing and recycling your fluorescent tubes, what is going in there to replace the ones you are removing? If the answer is “more fluorescent tubes,” may we ask why?

Time to ditch the band posters! Show off a new painting or favorite framed photograph with a battery-operated picture light that installs easily and without messy cords.by Celebrate home ownership by decorating the front door or mailbox  with a customizable house number sign.

Repairs are an inevitable part of home ownership and there’s nothing quite as frustrating as not having the right tools. Cover all of their bases with a 130-piece tool set. Make small repairs and upgrades easy with a flexible work light that can clamp onto surfaces and direct light right where they need it.

If you are planning on renovating or sprucing-up your kitchen, it’s probably a good idea to map out a detailed lighting plan as well. Most people find this a little strange as they feel that lighting in a kitchen isn’t something that needs too much of consideration or planning. It’s just a place where you cook and probably where you have an informal meal after all.

However, the fact is that it’s important to plan kitchen illumination well if you want to make optimal use of your kitchen spaces. Here, we would like to share some basic lighting ideas to create the right balance of functionality and aesthetics.

If you want to get a better idea about what type of lighting would work best for your kitchen, it’s vital to understand how your kitchen spaces relate to the different type of lighting. Let’s start off with understanding what type of bulbs you can use for the best effects:

These bulbs emit a yellowish light and you will now find many artistic versions of these on the market today.

These bulbs throw off a flat, cold light that has a bluish tinge, which lends a very harsh effect to the room.

These have a warm light that makes the place look very inviting and comfortable

These are the latest in light bulb technology and are available in a range of effects including white, cool daylight, warm light, yellow and a range of other colours and hues. Aside from this, LED bulbs are also 80% more energy-efficient than standard bulbs; and most property owners are now opting for these fixtures.

In addition to the types of bulbs used, the style of lighting or the lighting effects are what impact the ambience and appearance of a room. With this in view, here we discuss the different lighting effects that can be used in your kitchen:

This is one of the simplest ways to create the right lighting effect in your kitchen. This type of lighting is designed to help you move comfortably around the room. In most instances this type of lighting comes from grid-style can lighting, widely-spaced, wall and ceiling lamps, semi-translucent skylights or even the natural light that streams in through glass windows and doors. This is the base layer of any lighting plan.

In your kitchen, task lighting would be required to illuminate kitchen counters and food preparation spaces. Since you will be cooking in your kitchen every day, it’s important that the task lighting be planned and installed well. If you have only recessed lighting fixtures in your kitchen, you will feel the lack of focused light when you are cleaning, cooking or prepping in that space.

If you install one-dimensional lighting in the kitchen, it creates unsightly shadows in different areas of the room, while ceiling lighting is ineffective in illuminating spaces like sinks, under counter or cabinet areas etc. On the other hand, if you add special pendant lamps over the counters or even your kitchen island it can prove to be a more practical solution. Under-cabinet lighting can also help in illuminating the cabinets that are positioned there.

This effect doesn’t seem as necessary as ambient or task lighting does in a kitchen space, as the illumination it provides isn’t as functional as the first two. However, it can have a significant impact on the way your kitchen spaces look. If you want to enhance the appeal of your kitchen (regardless of whether you are getting it entirely renovated or are opting for a lighting upgrade), it’s important that you plan your accent lighting well.

Using air ducts in order to distribute both heated and cooled air throughout a building is one of the most common ways in which homeowners choose to keep their homes comfortable all year long. Doing so, of course, means that your air ducts are in play throughout the entire year. Are you certain that yours are in the condition necessary to perform their job precisely as intended? If not, give FB Electrical Services a call today. We are more than happy to thoroughly test your air ducts so that you know what kind of shape they are in. Once we have completed your duct testing in Somerville, we can go about resolving any problems that we may find with your air ducts. That way, you can heat and cool your home at peak performance and efficiency levels.

When you stop and think about it, you have likely seen very little of your air duct system. For the most part, your ductwork is hidden from view. The last thing that you want to do, though, in terms of your ductwork, is to develop an “out of sight, out of mind” attitude in regards to their condition. Leaky ductwork is one of the main sources of energy loss and low efficiency in many homes, and it is also one that professional duct testing can help to pinpoint the source of. When we test your air ducts, we can determine with certainty if it is compromised, and we’ll have the information we need in order to right whatever wrongs we may find.