Outlets are wired into your home to make it convenient to plug in anything from an appliance to a lamp. However, an electrical fault can occur endangering your home. It’s not a good idea to have 19 different appliances plugged into a single outlet. This can cause a short; not to mention the maze of cords running through the room aren’t safe for family and pets.

Sometimes electrical faults in your system can cause a ceiling light or fan to stop working. After identifying that a bad bulb is not the culprit, you should turn off the power and inspect the light fixture itself. Check the cable and flex connections and make sure the terminal screws are tight. Use a continuity tester to make sure the flex hasn’t gone bad requiring a replacement.

Lights, fans, and other fixtures can also stop working because a residual current device has tripped. You can reset the device but if it trips again it’s best to call in a certified electrician.

If you are still experiencing problems after doing these simple troubleshooting tasks, it’s always best to call in a trained electrician. Outlets or lights that are malfunctioning could be caused by exposed wires somewhere in your electrical system. If your circuit breaker continually trips, it means the current in your home is not cycling as it’s intended. Either way, it’s much safer to have these issues repaired by a good electrician.

We know your family’s safety is important to you, but have you ensured their electrical safety? The amount of electricity running through your home has enough power to cause death if electrocuted.  Implementing a few simple tips regarding your cords and plugs, outlets, and circuit breakers could potentially prevent injuries or fires in your home.

Cords & Plugs

All your electrical appliances have cords, and being a daily item, many times we overlook any wear-and-tear that could potentially be a safety hazard to your family and home. Make it a habit to check each appliance’s cords and plugs before every use. Check your cords for any frays, cracks or kinks. If they are damaged, replace the power cord before use; such exposures could be a fire hazard.

Also, make sure to be using your cords appropriately. As much as you want to tuck away or hide your cords, never staple or nail cords in position! Try using tape or twist ties to secure your cords safely. Also, refrain from running your cords through doorways or under rugs, this could cause damage to the cord or cause overheating. Instead try using an extension cord to safely reach that desired location in your home. Although, extension cords are not intended for permanent use, this should only be a temporary solution. Consider rewiring if you are really tied to having your appliance in a specific out-of-reach position.

Outlets

Once you are confident that your cords are safe, now you need to ensure that your outlets are also safe. Every outlet should have its wires covered by a secure plate and if you have children, make sure your unused outlets are covered with a childproof cap. Avoid using multiple adaptors or power strips, which can overload your outlets and cause fire hazards. Instead, relocate your appliances to another outlet.

For outlets located near a water sources like your bathroom and kitchen, you should check to make sure that your home is equipped with a GFCI (ground-fault circuit interrupter) outlet. This is a fairly new technology of which is now mandatory in all new houses built. A GFCI will protect your family from electrical shock if it ever comes in contact with water.

Circuit Breaker

Your circuit breaker protects electrical wiring from overheating or catching fire. If too much electricity is passed through a certain fuse it will “blow;” breaking the flow of electricity. If this happens, the fuse needs to be replaced – make sure to find the right size fuse to allow the appropriate flow of electricity. Your circuit breaker should always be easily accessible and all members of your family should be aware of its location and how to use it when the time comes.

Your electrical appliances, outlets and circuit breakers are constantly changing over time so make sure to be checking them regularly. Make this a household habit for your whole family. If you notice any signs of electrical issues such as dimming or flickering lights, unusual sizzling or buzzing sounds, or if your circuit breaker is continuously tripping, call an electrician from Expert Electric at 604-681-8338. One of our experienced electricians will gladly examine your home for any electrical concerns.

Your family’s safety is our top priority!

You know that misusing your electrical system can be dangerous. With so much power coursing through the wiring in your home, it’s possible to cause a house fire if your system isn’t working properly.

Although an overcurrent protective device is installed on your electrical system to prevent house fires, you shouldn’t rely on that exclusively for your family’s safety. To ensure you and your family is safe, it’s important to know how to reduce the load on your circuits to prevent blackouts and the potential for a house fire.

An electrical overload is when one circuit in your household is expected to produce more power than it can reasonably handle. You don’t have to be a licensed electrician to recognize you are overloading your circuit. If you notice that your power trips when you plug in an electrical device, then you are overloading the circuit that electrical socket is on. Fortunately, there are ways you can reduce the load and prevent blackouts.

The easiest way to reduce the load any one circuit is responsible for is to use another circuit. If your circuits aren’t mapped out in your breaker box, then you can reasonably determine what sockets are associated with different circuits by manipulating the switches. Once you turn off the electricity in one room, you can test what sockets aren’t working to determine what sockets in your home are associated with each circuit. There is no danger to you by doing this, but it is time-consuming.

Armed with the information about what sockets work on the same circuit, you should distribute your use of electrical sockets across various circuits. By using other electrical outlets, you will avoid the tendency to cause a blackout.

You can improve your home’s safety by being mindful of your electrical system. If you are experiencing blackouts or you rely on a lot of electrical devices, it’s important that you avoid overloading your system. Beyond switching to a new circuit, you can have a member of our team install a new circuit which would help reduce your electrical load.

Efficient, successful electrical troubleshooting takes a special kind of Beverly Hills electrician. This is the sort of skill that can’t come just from book knowledge and a college degree. Electrical troubleshooting is built upon solid, hands-on work experience and an in-depth expertise in tracking down often elusive electrical system problems. A talented electrical troubleshooting expert is a valuable find for a person dealing with a so far unidentified commercial or residential electrical system problem because an unresolved electrical problem always has the potential to turn into a real hazard at some point. You need an electrician in Beverly Hills that can find the problem quickly and get it taken care of efficiently.

Some electrical problems are pretty straightforward, resolved quickly and easily by an electrical upgrade or two or a bit of electrical rewiring. Others, however, present a bit more of a challenge, especially electrical problems that are intermittent. Those can be difficult for the average electrician to identify and deal with. They say that admitting there is a problem is the first step, and the concept applies to electrical systems. If an electrician can’t find the problem, he won’t be able to fix it and restore your electrical system to optimum functionality and safety. That is why you are better off dealing with the sort of expert team of professionals you’ll find at the Electric Connection.

The Electric Connection has been working throughout this region for more than 30 years, handling a wide variety of commercial and residential electrical projects successfully. They’ve built up a solid reputation for the quality of their residential and commercial electrical work, as well as for the dedication with which they strive to achieve a high level of customer service. This electrician Beverly Hills CA electrical contracting company offers a lifetime guarantee on all of their work, as well as a free home electrical safety assessment with every job they do. That way, upcoming repairs can be spotted and maintenance needs pointed out, helping customers to avoid being caught by surprise by a system failure or hazard.

This company is very serious about its customer service standards. If you schedule an electrical service call with an electrician in Beverly Hills CA from the Electric Connection, and your technician gets there even just a single minute late, your service call is free. That is evidence of a well disciplined, extremely professional team, because obviously an electrician that can’t be on time and professional is not going to last long there. This company also offers free over the phone help and devotes a section of its web site to electrical troubleshooting and electrical system maintenance tips. They also offer free over the phone estimates, based on the situation or symptoms as you describe them.

You may be able to limp along or work around an unidentified electrical problem for a while, but eventually it is going to get worse. And, you can’t predict when that will happen or how bad it will fail. A sparking short behind a wall could burn your house down, in the worst case scenario. A problem that could have been managed with a little bit of rewiring or by installing a new electrical circuit if an experienced Beverly Hills electrician and electrical troubleshooter has been called in to find the problem, may end up being a much costlier repair, such as a whole house rewire.

If you have a commercial or residential electrical system problem that needs to be properly diagnosed and repaired, choose an electrician in Beverly Hills CA that has the experience and expertise to get the job done right the first time. Electrical problems should be dealt with as soon as possible, because delay could result in a more costly repair situation or could even end up causing serious property damage or worse. The Electric Connection has the Beverly Hills electrician and troubleshooting experts you need.

Click here to visit our website.