A bad circuit breaker is a major inconvenience, but there can be other issues at play when your power supply isn’t working the way it should. Breakers protect you and your home from current overloads and other electrical issues. If the circuit gets overloaded, the breaker will trip, cutting power to eliminate the risk of fire. Sometimes a breaker will trip even when there is no overload, but it can be tricky to figure out which situation applies.

If you think you have a bad circuit breaker, look out for the following signs so you can get the problem taken care of quickly.

If your breaker is tripping, it could mean there is a device on the circuit causing an overload. Identifying what circuit the breaker is protecting can help you figure out if the problem is with a device or with the breaker itself. There might be a label on the breaker panel that gives you this information, but if not, you can figure it out by testing your lights and devices. If you disconnect the devices connected to the circuit and try to reset the breaker again, the outcome will confirm whether you have a faulty breaker. If it still trips even without the devices connected to it, it is defective and needs replacement.

Did you know the lighting in your office could be making you feel sick?

Feeling unmotivated and lethargic, suffering from headaches or eyestrain? There are some simple steps you can take to energize the work environment to combat stress and elevate mood by choosing the best lamp for your desk or task lighting needs. 

Healthful illumination is key to an environment partnered with increased productivity and job satisfaction.  The trend today is to improve upon what you already have rather than investing in new construction.  Upgrading your office with affordable and energy-efficient lighting is an investment that leads to outstanding visual improvements and a more healthful work environment.

Employ the Right Lamps for Greater Health Benefits:

Top Picks for Office Lighting:

-Quoizel’s “Zen” collection includes floor and table lamps with Mystic Black finishes and Rattan shades for corporate casual decor.

You know you need some electrical help around the house, but you are not sure who to call. A quick look at the yellow pages will tell you there are no shortage of electricians listed. Your friends and family are also likely to give you their two cents as well. Before you just randomly choose an electrician in Pasadena, there are some things you need to know to look for. Not all electricians are the same. One crew that you are sure to be impressed with is the team at The Electric Connection.

One of the most important factors of choosing an electrician is making sure they are licensed. Hiring an unlicensed contractor leaves you vulnerable and could end up costing you a great deal of money in the long run. You want someone who has the training and the credentials that qualify them to perform work on your house that is done up to code and will meet the county’s standards. Hiring a Pasadena electrician who has not been properly educated puts your home at risk.

Of course, you also want a professional in your home. Someone that isn’t going to make a huge mess and leave it. Don’t hire just any electrician. Pasadena residents can check the validity of the license and check to see if the person or company is insured and bonded. This way, if there is damage or the electrician happens to suffer an injury while working in your home, they are protected and so are you. While it doesn’t hurt to ask friends and neighbors about their experience with an electrician, always verify the credentials before you make a final hiring decision. Give The Electric Connection a call if you need a licensed, professional team of electricians to take care of any work around your home.

Over the years standards for building homes have improved to offer more safety and reliability. Unfortunately, there are still homes out there with old electrical wiring in them that could cause electrical hazards. These old wiring types (knob and tub wiring) should be replaced as they can result in extensive damage to your home over time if not properly taken care of. Know what to look for in your home and upgrade your wiring.

There are several common signs that can indicate your home’s wiring may be old and out-dated. If you notice these issues occurring in your home, it may be time to contact an electrician and have a home electrical inspection. Common signs are:

Knob and wiring tubing can be found in homes built around 50 years ago. If properly maintained, knob and wire tubing can be safely used in your home. But often over the years the wiring can begin to crack and break down leading to exposed wires. Because of the age of the wiring it often will not reach current code and can prevent your home from being insured in some cases. Overtime knob and wire tubing can heat up and requires sufficient air space around the wiring. Any contact with insulation or wood can result in a fire.

In some cases you could experience some of the issues listed above and you don’t have knob and wire tubing. In many cases, when a home was originally built it was brought up to correct standards and has potential hazards all over. If you are unsure of the status of your home’s electrical wiring or you are experiencing some of the signs listed above, we highly recommend that you have you’re home inspected. An electrical inspection can catch potential hazards and also lead to better electrical efficiency.

To schedule a home inspection, contact your local Expert Electric at 604-681-8338.

If you have a lot of appliances running at once,  you can actually increase your chance of having a surge. When high-powered electrical devices such as AC units and refrigerators are working at peak capacity, it takes a lot of energy to keep their motors and compressors going. This high demand can upset the steady voltage flow through your electrical system.

You should also unplug your important appliances during a power outage. There is often a surge when the electricity comes back on.

Additionally, consider a surge protection device which goes in the electric panel where the circuit breakers or fuses are located. The suppressor will channel the extra electricity during the power surge and prevent it from getting into your main system. If you live in an area that experiences a lot of storms, a lightning rod might be a good idea to mitigate the damage of a direct strike. Finally, make sure your homeowner's policy insures you in case a surge does knock out your devices, despite your best efforts to protect them.

Your local Mister Sparky® electrician can help protect your electronics and appliances with whole-home surge protection. Give us a call and we'll explain the options and help you make the right choice for you.