/foot)

Strips with more LEDs per foot will consume more power.

In short, if maximum energy efficiency is what’s most important to you, choose a light strip with smaller LEDs and fewer LEDs.

In order to ensure your LED power supply doesn’t overheat and fail prematurely, we use this general rule of thumb:

Make sure the total wattage of your LED strip lighting is at least 20 percent less than the power supply’s rated wattage.

For example, if you have an LED strip light that requires 80 watts of power to run, you’ll need a power supply that’s rated for at least 96 watts.

The vast majority of our strips include wattage per foot right on their product pages.

power supplies range from six watts to 1,500 watts for compatibility with a wide variety of LED strip lights.

Let’s take a look at an example:

It’s important to verify that the voltage of the power supply you choose is compatible with the voltage of your LED strip lighting. Also, be sure that the power supply’s input voltage matches that of the location it will be installed in. If you have an LED strip with 12-volt DC operation that you wish to use in a 120-volt AC home wiring system, you’ll need a power supply that includes 120 volts in its input range and has 12-volt DC output.

Another factor to take into account for longer runs is voltage drop. A significant voltage drop is present after a certain distance of LED strip. After this distance, there will not be enough voltage present to light the next length of strip. This varies depending on the type of strip and length being used. Usually, a single-density strip (nine or less LEDs per foot) will need to run back to a power source every 32 13/16 feet (10 meters). A high-density strip (18 or more LEDs per foot) will need to run back to a power source every 16 3/8 feet (5 meters). Please refer to “Max Run” in the specifications table of the strip light to determine how many can be run continuously without a parallel run back to power.

3) the 4) if you want your strip to be dimmable

power supply calculator on the product pages of all of our LED strip lights!

There are a few steps involved:

Step 1: Select your strip and the length you need.

Step 3: Click the green “Power Supply Calculator” tab, and select your product by choosing it from the list OR by pasting the exact part number in the search bar.

Step 4: Enter the number of strips at the desired length you’ve selected and voila! You’ll see a list of all compatible power supplies with the best match at the top of the list!

When dealing with electronics, safety is paramount, and you want everything to work like it’s supposed to. So if you’re still not sure which power supply to use for your LED strip lighting project, just reach out to our technical support team or customer service department at 866-590-3533. Our teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.

If you’re experiencing shocks when you pull a plug out of the wall, or if you notice a spark when turning a particular electrical switch on and off, a faulty appliance or bad wiring may be to blame. Be careful to make the distinction, however, between an electrical issue and a shock that might occur after, say, crossing a carpet. The latter is caused by static and is not a serious issue.

Flickering lights are irritating, but they aren’t always cause for concern. They may just be flickering because of a faulty or loose bulb, so try swapping out the bulb in a flickering light before calling in a professional. If that doesn’t work, the wiring in your circuit breaker may need to be reworked, or there may be an issue with the connections in your light fixture.

If a bad burn-like odor emanates from the outlets and switches in your home, the first step you should take is to turn off the power from the electrical panel. The second step should involve placing a call to your electrician, who can tell you if the problem is with a particular device or a potentially serious wiring issue. Don’t ignore a burn smell – if left unassessed, it could lead to an electrical fire.

While some of these signs don’t always indicate a serious problem, others are cause for concern. When it comes to electricity, it’s always best to err on the side of caution, so if you’re experiencing any of these issues and can’t determine the cause, it is time to make a phone call.

As a Dallas Electrician will be familiar with standard wiring practices and will know the proper way to test the circuit that they will be working on to ensure that it is safe.

Another huge benefit to using a licensed electrician for your home electrical work is that they will be well versed in all of the building and safety codes required to make sure the job is done right. The reason that this is important is two-fold. First, it is legally required to adhere to all building and safety codes, and if you ever intend on selling your home or having it inspected for any other reason, a DIY Electrical repair or addition will cause your home to fail inspection if building and safety codes are not followed to the letter, generally costing you more money later down the line to have an improperly performed job repaired. Secondly, and even more important, is the fact that building and safety codes are put in place for a reason. If you are not familiar with these codes or do not follow them, you are putting yourself and your family at risk of electrical shock, electrical fires, and injury or death due to a faulty repair.