The MD, DC, and VA area is known for getting slammed with violent and powerful thunderstorms that produce severe lightning. Electrical surges, which are caused by lightning, can wreak havoc on your expensive electronics and appliances.

A lightning strike that hits a power line several miles away from your house can impact all your electronic items. Whole-house surge protection is the best option you have to protect your home electronics and wiring from the damage caused by lightning strikes.

Everyone from the National Fire Protection Association to the Institute for Business and Home Safety recommends the use of whole-house surge protection. As a homeowner, the good news for you is that protection is readily available, and even top-of-the-line solutions are affordable. The gold standard in whole-house surge protection is a two-tiered system—a whole-house surge protective device, or SPD, installed at the circuit breaker box, and plug-in SPDs on individual outlets. A whole-house SPD can protect against up to 40,000 amps of current flowing into your home from the outside; normal household power is between 200 to 300 amps. When an electrical surge occurs as a result of a lightning strike, the device detects the excess current and safely diverts it through the house’s grounding path. Whole-house surge protection provides homeowners in MD, DC, and VA peace of mind when a powerful thunderstorm passes the area.

Whole-house surge protection can typically be installed in a home for around $200—it’s an easy job for a top electrician. The cost of replacing electronic equipment in an average home is a whopping $8,000, and it may be even higher for homes in MD, DC, and VA. Whole-house surge protection is cheap insurance against electrical surges caused by lightning strikes. It provides a layer of protection to all the electronic items in your home.

To ensure complete safety, Kolb Electric recommends that you allow a qualified, experienced electrician to complete the wiring for whole-house surge protection—there are several steps involved that are best left to a professional.

If you require surge protection wiring or want a full whole-house surge protection installation, contact Kolb Electric.

Showing some love to your sweetheart this Valentine’s Day is a beautiful thing. Are you also showing that love to the electronics that keep things running smoothly in your home year-round? Much like your honey, ignoring those electronics for any length of time without giving them a little much-needed TLC could leave you in the doghouse.

Or your 2-year-old… Or your morning coffee… Or your dog. Your electronic devices need to be protected. Are they properly cased and safely stored?

Cleaning your electronics immediately is essential after unwanted exposures to items of all sorts, from your daily cola, food crumbs, dirt and grime, to a hosing from an over-friendly pet, and more. Don’t just grab a wet paper towel. Make certain to use compatible cleaning solutions and rags by making a worthwhile investment in specialized cleaning sets available for each of your sensitive devices. Here are some tips for properly cleaning and maintaining your electronic devices:

Recycle unnecessary or extraneous cords and chargers. Properly organize wires leading to electronics like televisions and DVD players, which are dust bunny magnets courtesy of static electricity. Untangle wires and straighten them together with zip ties to allow for easier cleaning and vacuuming without dislodging connections.

Opt for additional insurance or available protection plans that cover the parts and labor necessary to resurrect expensive devices.

Remove batteries from items you don’t use often to prevent damage from corrosion. Keep batteries on hand for items like remotes (which should also be cleaned) and store chargers carefully. Consider the addition of a professionally designed and installed charging station for the safety of sensitive portable electronics and to drastically cut the clutter.

Today’s expensive electronics and appliances are more sensitive to power spikes and surges than their predecessors. Keep them protected with whole house and point-of-use surge protection. The cost of replacing a single item destroyed by a surge will often cover your investment. Losing a single large home appliance will cost you double the investment of professionally installed surge protection from Mr. Electric®.

Ready to show the love? Contact Mr. Electric today.

Were you the lucky recipient of a fabulous hot tub this holiday season? If so, you are probably eager to have it set up as soon as possible. It may be the middle of winter, but the California weather makes it the perfect time of year to enjoy the hot water while enjoying the brisk night air after a long day. It is a relaxing experience and you are likely eager to get to it. You will need to call a Burbank electrician to schedule your install appointment. The friendly team at The Electric Connection is on hand and ready to take your call.

It is imperative you do not try and install the hot tub by yourself. There are some technical things that must be done in order to install the hot tub properly. The first order of business is to have an electrician come out and check your electric panel to determine if you have the space needed to install an additional 240-volt outlet. That is what your hot tub will need to operate. If you don’t have the available space in your current electric panel for the additional breaker, you will need an electric panel upgrade. When the electrician does the initial inspection, he or she will let you know what you will need.

The hot tub will need to be hard-wired to your home’s main electric by an electrician. Burbank residents will also need to check with their county to determine what permits are needed for a hot tub installation. Depending on where you plan on placing the hot tub, the wiring from the hot tub to the home will need to buried. Keep this in mind as you decide where you want your hot tub. If you are ready to get your new hot tub up and running, give The Electric Connection a call today.

Some electrical repairs just can't wait. If you discover loose wiring, a faulty circuit or other problem in your home electrical system, it is essential to call an electrician immediately. At best, electrical problems can be annoying. At worst, they can damage your appliances or even start a fire in your home. That's why it's so important to have savings on hand so you don't feel compelled to delay emergency electrical repairs. Unfortunately, far too many families are not prepared financially to cover this type of emergency.

Emergency Savings Not Cutting the Mustard

The savings profile of the average American family leaves a lot to be desired. A recent report pointed out that 25 percent of homeowners in the United States don't have any money at all saved to protect themselves in case they need an emergency electrical repair or other home service. What's more, about half of the families that do have savings have less than $1,000, which might not be enough to cover a major bill.

And you never know when you might need help. In fact, nine percent of households said they had a problem with a circuit, switch or outlet in the past year, according to the report. Unless you are already an accomplished electrician, these are not problems you can address by yourself – you need to hire a professional in order to protect the safety of your home and your family. If you don't have any savings, that means borrowing money or putting off a repair – a dangerous prospect.

Make Sure You Have Money When You Need it

Follow these tips to increase the odds that you have cash on hand when you need it:

Expert Electricians Keep You in Safe Hands

Maintenance and repairs on your wiring and circuits are tasks you simply cannot put off. Whether the electrical work you need is routine or a true emergency, call upon a professional electrician to get the job done safely and promptly.