Using air ducts in order to distribute both heated and cooled air throughout a building is one of the most common ways in which homeowners choose to keep their homes comfortable all year long. Doing so, of course, means that your air ducts are in play throughout the entire year. Are you certain that yours are in the condition necessary to perform their job precisely as intended? If not, give FB Electrical Services a call today. We are more than happy to thoroughly test your air ducts so that you know what kind of shape they are in. Once we have completed your duct testing in Somerville, we can go about resolving any problems that we may find with your air ducts. That way, you can heat and cool your home at peak performance and efficiency levels.

When you stop and think about it, you have likely seen very little of your air duct system. For the most part, your ductwork is hidden from view. The last thing that you want to do, though, in terms of your ductwork, is to develop an “out of sight, out of mind” attitude in regards to their condition. Leaky ductwork is one of the main sources of energy loss and low efficiency in many homes, and it is also one that professional duct testing can help to pinpoint the source of. When we test your air ducts, we can determine with certainty if it is compromised, and we’ll have the information we need in order to right whatever wrongs we may find.

Science fiction aficionados may appreciate today’s blog post on one of the fundamental ingredients needed to create an other-worldly retreat where you can … well, space-out. From childhood bedrooms to multi-million dollar estates, science fiction has been the motivation for some of the most amazing spaces ever. Call it your Star Wars Sanctuary, Asimov Alcove, or Halo Haven, sci-fi rooms all have similar characteristics that give it their “universal” appeal. LIGHT.

One of the most popular settings for a fictional future is in outer-space. A black landscape, interrupted only by the flickering of shining planets & stars is the perfect backdrop for sci-fi design. LED fiber optic ceiling lights will make you look like you’re in space.

Patience and attention to detail will go a long way when installing these kits. You’ll find detailed instructions Make a home-made star constellation projector with star printables and a flashlight to mark real constellations!

Did you know that today is National Science Fiction Day, as well as Isaac Asimov’s birthday? 

How many times have you observed your neighbor using a weed-whacker that is connected to a series of four or five extension cords in order to reach the far corner of the yard? Probably plenty of times. When using a series of cords, be sure they are all the same rating, and check with the manufacturer or your local licensed electrical contractor to see if it is safe.

Extension cords are rated by the thickness of the wires inside using a standard known as AWG (American Wire Gauge).

If you’re in the midst of a renovation or simply rearranging your floor plan, then you’ve likely come across the need to add or relocate a light fixture. Maybe your new dining room table is a little wider than the old one, you’re adding a kitchen island with pendant lights, or you’ve finally convinced your significant other to let you get that pool table you’ve always wanted. In any case, you need to move or add a light fixture – but how and when?

First, it should be noted that, contrary to how it may seem, most light fixtures are not connected to a joist or even drilled into wood. Instead, hanging light fixtures and ceiling lights alike are located between joists and supported by electrical boxes that grip a wide surface area of the sheetrock that makes up your ceiling to support the weight of the fixture below; for heavier fixtures, like large chandeliers or ceiling fans, there are larger, even joist-secured boxes that will need to be used.

If you’re moving a light fixture, it is important to note that there are certain limitations as to where the fixture itself can go. If you wish to relocate the fixture to a place where a joist exists just above, then you’re likely going to have to use a swag hook and chain to anchor the fixture in place, as a box under a joist is not an option. That said, if you’re moving the housing for the fixture itself, you’ll need to know which direction the joists above run, then choose to move it either through the same joist cavity or drill through a joist to run the current wiring to the new housing. Other things to consider include which switch controls the light and where it is located, as it is a safe bet that a wire will have already crossed all joists above (at some point). This can prevent your electrician from drilling needlessly by allowing them to fish the wire back to the earlier point. If your switch is further away than the destination, you can bet they’ll have to do some drilling. Jumping through, between, and around the joists in the ceiling represents the largest obstacle your electrician (and light fixture) will face.

Once your location is set, all that is left is to get your electrician out to assess and perform the work for moving your box. If you’re planning on doing one large fixture over a pool table, island, or entire room, then you’ll want to take into account the power output of the fixture compared to what that circuit can safely allow for as well as the weight of the fixture. A typical rule of thumb is that anything under about 35 pounds can be handled by a standard drywall box, but something more (or with a fan) will need extra stabilization. Surprisingly, if you’re running numerous small pendant lights, the electrician may have an even easier time running the circuit and ensuring that your lights are up and running in no time. Just be sure to discuss the fixtures you have in mind with your electrician before you purchase them to know what they believe your limitations are!

Whenever you need electrical work done around your Des Moines home, contact the experienced professionals at Electrical Gurus. We are proud to offer the finest licensed local electricians in the area and are always more than happy to help out on your household projects.

The lighting of your kitchen plays an absolutely critical role in how your design will marry together, as well as make a very noticeable impact on the functionality of your space.

Many homeowners put off or ignore lighting in the kitchen, and neglect to plan accordingly. This can only end in tears! What is the benefit of those gorgeous mahogany cabinets, and that handsome granite counter top if no one can see them properly?

Don’t find yourself regretting your kitchen design decisions. Take lighting into account right off the bat! But how do you plan for your kitchen lighting? There are a few types of light to consider, and it all comes down to how you want your kitchen presented, and more importantly, how you want it used. Consider these lighting types for your perfect kitchen design.

For the sake of giving off the best lighting possible for visual appeal, consider these:

Task lighting is used to provide ample illumination for performing specific tasks (thus: task lighting), and should be installed with a specific purpose in mind. This could be for your stove top, a cutting and preparing area, or a space devoted to work or play. Task lighting is best used when it provides ample, glare-free lighting. These fixtures work particularly well:

Whether you need to install new lights in Alexandria, Annapolis, or anywhere in between, you can rely on Kolb Electric’s licensed electricians for a job done right. We’ve been helping DC home and building owners like you with all their electrical needs since 1925 and are ready to help you next!