From the 1950s to the 1980s, the Federal Pacific Electrical Company (FPE) installed electrical panels in millions of homes across the country. Unfortunately, these electrical panels are basically recipes for disaster—over the years, electricians and home inspectors have found that FPE panels often fail to protect homes from overcurrent or short circuits. The danger seems to happen randomly: even if panels have been installed and working properly for years, a single incident can quickly cause the panel to overheat and create a major fire hazard.

Remember—circuit panels trip in response to unusual surges of electricity. If they fail to trip, as FPE panels often do, those electrical surges cannot be stopped or shut off manually and will move through your home until they run out of fuel or until the wires burn out. This could cause the panel to overheat and catch fire, leading to a potentially serious disaster.

FPE panels may not be up to modern safety codes – electrical safety standards have been updated significantly since the 1980s, and experts say that FPE panels, which were produced from the 50s and into the 80s, do not meet these updated standards. Some of the deficiencies noted by home inspectors include:

FPE panels may have serious design flaws – not only do FPE panels not meet modern safety standards, but they also came with some serious design flaws that weren’t even common among panels built around the same time. Some of the most significant flaws include:

FPE panels may have manufacturing defects – as if that weren’t enough, the Consumer Product Safety Commission (CPSC) has noted a number of defects that make FPE panels unfit for homes, including weak materials used to construct the breakers that may prevent them from tripping and could cause the panel to catch fire.

If you live in an older home and you’re worried your panel might be a danger, call Kolb Electric. Our trained electricians are familiar with the potential hazards of FPE and other outdated panels and can replace your existing panel with a modern panel that will keep your home safe for decades.

For more information about circuit panel replacement in Maryland, Virginia, or Washington, DC, call Kolb Electric today.

You may have heard the term GFCI from your electrician before. But what exactly does it mean? And is that type of outlet really necessary in your home or building?

We all know that water and electricity don’t mix. That’s what makes electrical outlets in kitchens, bathrooms, and other rooms where water is used so tricky. To reduce the chance of electrocutions, burns, and shocks, virtually all North American building codes require that ground fault circuit interrupter outlets (GFCIs) be installed where there is water nearby. GFCI outlets have a built-in circuit breaker that instantly stops the flow of electricity when it senses a surge.

A GFCI outlet not only helps keep you and your family or building occupants from getting shocks and burns, but it helps prevent electrical fires. In the even that there is an electrical fire, it can lessen the severity and any damage.

A GFCI outlet is important not only to meeting local building code requirements, but also to help prevent potentially-fatal accidents.

GFCI outlets are designed with a red button that activates the outlet after the built-in breaker is tripped, and a black button that tests the outlet to make sure that the breaker is working properly. The U.S. Consumer Product Safety Commission (CPSC) recommends that all ground-fault circuit interrupter outlets be tested in the following intervals:

To test your ground-fault circuit interrupter outlets, plug a lamp into the outlet. Turn the lamp on and push the black test button. If the lamp goes out, the outlet is working properly. If the lamp remains lit, contact a licensed electrician to evaluate the problem. Electrical and wiring issues make poor DIY projects and are best left to electricians who are trained to safely handle electrical current and wiring.

At Kolb Electric, we want to help you keep your home or building safe in the Maryland, Northern Virginia, and Washington, DC areas. We can save you time by inspecting and testing all of the ground-fault circuit interrupter outlets in your interior space and addressing any electrical issues we may discover during the tests. To learn more about electrical safety and GFCI outlets and/or to schedule a service appointment, call us at 877 287-1179. We’ve been helping Mid-Atlantic homeowners like you with their electrical needs since 1925.

A gas furnace is an economical way to heat your home, and a yearly furnace tune-up is essential to keep your appliance at peak performance. The more efficient your furnace, the less energy it uses. It’s better to get yearly service, while the weather is still warm, than to be faced with no heat on a cold Colorado night. In the long run, you’ll save money with periodic tune-ups. Here are some of the ways an annual visit from a Colorado furnace repair technician can cut down on your costs.

Minimizes Repairs

A furnace tune-up reduces the incidence of repairs. Think of it as preventative medicine for your home. With regular checkups, you nip problems in the bud and avoid costly emergency service. Technicians clean and inspect your appliance. If anything is in need of maintenance, it can be done on the spot or scheduled for later.

Keeps Your Home Safe

Keeping your family safe is even more important than saving money, but sometimes the two things go together. While heating systems are not hazardous under normal conditions, a gas leak in your home leads to dangerous conditions. Evacuating to a hotel, either because of a leak or because of no heat during frigid conditions, is expensive. During a furnace tune-up, a technician will check that the combustion process is precise and safe.

Proper Airflow

The correct airflow is essential to the function of your heating system. If the airflow is faulty because it’s restricted, it puts a strain on the furnace and can shorten the life of your appliance.

Improved Efficiency

A clean, well-maintained furnace performs better than a dirty one. Efficiency leads to less wasted energy, and that translates into lower bills for you.

Maintains the Warranty

Most manufacturers void a warranty if the furnace doesn’t get regular maintenance. Protect your investment by following the manufacturer’s suggestions for tune-ups