We all want to save a little money and these days, it is more prudent than ever to do whatever we can to save a few dollars in the family budget. As you look at your budget and think of ways to cut costs, you have probably laid your eye on that electric bill a time or two wondering how you could make it just a little less. If this is you, then try these tips from your electrician Santa Monica home and business owners can save a few dollars by following these simple things.

1-Replace your halogen lightbulbs with CFL bulbs. The bulbs cost a bit more initially, but they are more energy efficient and they will last 13x longer than the cheaper bulbs, which actually makes them cheaper in the long run.

2-Stop phantom energy draws by unplugging appliances, cellphone chargers, and electronics when they are not in use. These draw very little energy, but when you add up the 10 to 20 things that are probably plugged in right now, it certainly adds up quick.

3-Replace appliances with energy efficient appliances. This is a big investment at first, but overtime it will save you money. Look for those with the Energy Star sticker.

4-Install a ceiling fan to cut down on the heating and cooling needs. This is a job for your electrician. Santa Monica residents can turn up or down the thermostat a couple of degrees and rely on the ceiling fan to circulate the air.

5-Only run full loads in the dishwasher and washing machine. This cuts down on the frequency in which you run the appliance and therefore, can save you a few dollars.

If you would like more tips on how you can save money on your electric bill, give The Electric Connection a call today.

Are you still using incandescent light bulbs? Your electrician would recommend a different course. Efficient lighting technology has blown up in the last few years, and advanced technologies are just getting better. Light emitting diodes, or LEDs, are at the forefront of modern lighting thanks to their inexpensive and long-lasting luminescence. Some of these new diodes are leading the pack in must-have lighting features, including smart home integration that you can control with your phone. Read on to learn more about the latest in LED technology.

Upfront Costs are Dropping

One of the biggest complaints about early LEDs was the price. Almost any LED will save you money over time compared to an incandescent bulb, since they use 25 to 80 percent less electricity and can last up to 25 times as long, but many consumers balked at paying the $35 or higher retail price for a single bulb. Newer models, however, can recreate the look of that classic 60 watt incandescent bulb with fewer LED panels, meaning they are cheaper to produce and sell for $10 or less.

Options are Expanding

Other common complaints about the first LED models were that the warmth of the light wasn't quite right and they didn't work with accessories like dimmers. With today's technologies, however, you can find LEDs that give off almost any color and lighting profile, allowing you to mimic the look and feel of your old incandescent bulbs or tailor your room to fit more eclectic tastes. Not every LED is compatible with standard dimmers yet, but many are – just check the label on the box to make sure.

Make it a Smart Bulb

Many new LED models are designed specifically to work with smart technology. That means you can control them from your phone no matter where you are, set up a schedule for them to turn on and off, and even have different colors or light intensities at different times. Newer bulbs are also optimized to work with your other smart home systems to move you closer to a goal of integrated whole-house control.

Turnkey Functionality

One of the biggest advantages of upgrading to LEDs is how easy it is. There's no need to hire an electrician to set up new wiring or fixtures – the bulbs screw right into the pre-existing bases, out of the box. If you want tips on how to make the most of your new lighting options and create the room profile that fits your home, however, don't hesitate to call up your local electrician for guidance and advice.

A lot of time we are asked what is the equivalent LED product to convert from Metal Halide, High Pressure Sodium or Mercury Vapor. And a lot of time, we have a product in mind that works based on past experience. But how did we come up with that product, and how did we make the original decision on what was the proper replacement?

There’s a lot of science that goes into light, color, quality, and each light had it’s own characteristics. For example, it takes less LED to replace High Pressure Sodium than it takes to replace Metal Halide. And we are talking a lot more than just lumens. We are talking about color temperature, quality of light and something called photopic / scotopic lumens.

In the world of lighting, we measure foot candles with a light meter, this is called a photopic measurement. The light meter picks up everything, including spectrum’s that are invisible to us. Now, we humans see things to, and this is called scotopic lumens. Our rods and cones read and interpret light. And it does so differently than what a light meter does. So it is not uncommon when we demo a LED Light against a HPS light or Metal Halide, we first ask “Which is brighter” before we show the light meter reading. It leaves a few people scratching their heads. Well, that’s the science of of it all, and fortunately there is some handy tables called SP ratios that allow us to take the lumens of a particular light (photopic lumens) and multiply it by the S/P ratio to get the scotopic lumens equivalent.

For example, the S/P ratio for High Pressure Sodium is 0.40. The S/P ratio for LED at 5000K is 1.8. So if you take 40,000 lumens of HPS and multiply it 0.4, the effective scotopic lumens is 16,000. To get the same amount of lumens from LED, take the 16,000 and divide it by the S/P ratio and you get 8888 lumens. So the 8888 lumens of LED is the photopic measurement, the 16,000 LED lumens is the scotopic lumens measurement. So in an nutshell, you need 8,888 lumens of LED to replace 40,000 lumens of HPS from a scotopic point of view.

Here is a handy chart of common lights and ratios for you to use.

Alexai Erchak, while a graduate student at the Massachusetts Institute of Technology, is credited with developing the first prototype high efficient LED in 2001.  These LEDs use specialized mirrors and tiny photonic crystals to generate more usable light from the semiconductor materials.  Erchak observed that the Swallowtail butterfly highlights their fluorescent blue and green colors with a natural illumination much like that of his specialized prototype, and he was astounded at the similarity between the natural brightening structures in the butterfly’s wings and his own LEDs.

So much we learn from nature! The appeal of new designer outdoor lighting captures the essence of natural beauty and wonders of the world.  Make way for the butterflies and new designer outdoor lighting.

The “butterfly effect” is a phenomenon or belief that the flapping of a butterfly’s wings in one sector of the universe may be related to a tornado occurring in another part of the world. Could it be possible that the gentle vibrations in the wings of a butterfly could be the pivotal mechanism that leads to the ultimate surge of a storm cloud?  Is it science fiction or is there some truth to it?

Either way, there is no denying that the effect of designer outdoor lighting significantly increases the beauty and property value of our home.  And, the latest designs are eco-friendly, sustainable and made to last.

Bask in the splendor of summer style with these super natural compositions.

Novel summer finishes include this Raw Copper with iridescent glass from Arroyo Crafsman.  Arroyo Craftsman designs and manufactures fine outdoor lighting that honors the traditions of elegant simplicity combined with a quality craftsmanship established by the founders of the American Arts and Crafts movement. Arroyo’s designer outdoor lights are inspired by famed styles such as the California Mission, Swiss Chalet and English Tudor. Each piece from Arroyo Craftsman is meticulously hand crafted in the United States and available with several hand applied finish and glass options.

Glowing Butterflies Shine With Natural LEDs

May is Electrical Safety Month, which means it is the perfect time for circuit breaker replacement in Fairfax, VA. Of course, a part of ensuring electrical safety is making sure all your electrical fixtures are up to speed. Replacing your circuit breaker is one important step in ensuring your home far away from safety hazards like electrical shocks, power outages, and fires. Even though it can work well for a number of years, your circuit breaker will eventually show wear and tear that will begin to affect its performance, to the point where the safety of you and your family is jeopardized.