When the day comes for you to retire from work, you might find yourself with a lot more free time and a lot less money. Hopefully, you've planned your savings so you don't have to live your golden years on a shoestring budget, but in any scenario, it’s wise to rein in your spending once you're no longer receiving a regular paycheck. Read on for some advice on how to cut back on your energy usage after you retire and keep your monthly bills under control.

Combat Rising Utility Costs

Unfortunately, most people's energy bills actually go up after they retire. What's the difference? Now that you're home all day, you're paying to heat and cool the house and to power electronic devices during the hours you used to spend at the workplace. Essentially, you lost a little-recognized fringe benefit, since your employer used to pick up the tab for electricity and climate control eight hours a day.

To compound the issue, many retirees are recent empty-nesters as well. With the kids out of the house, you probably experienced a sharp downturn in your utility bills. Now, you'll be all the more likely to notice when they spike back up once you stop going to work.

You Have the Power to Save

You don't have to give in to sky-high utility bills, however. Check out these suggestions on how to save:

For a more thorough analysis of your individual circumstances, don't hesitate to contact an expert to conduct an energy audit on your house. You could see significant savings and enjoy your retirement all the more.

Electrical motors are wonderful devices that are used in a myriad of ways, making things easier in our daily lives as well as a wide range of industrial applications. When these gadgets fail, work often grinds to a halt till they’re back up and running, and the reasons for electrical motor failure can range from the commonplace to the bizarre.

While the list of possible causes can go on forever, we’ll take a look at some of the most common ones here:

Exposure to high heat is a top culprit for all kinds of equipment failure, and ranks as the number one reason for motor malfunctions and deterioration. Optimal running temperatures extend motor life, which is why they should be your first priority.

In fact, most of the other possible reasons for electrical motor malfunctions also lead to the generation of extra heat. A rise of even a few degrees can cause trouble over time, and if motor windings are exposed to an extra 10° C of heat, the life of their insulation drops by half!

For anyone who is in control, manages, or even owns a facility that has a parking lot for either employees, customers and clients, or both; you know that security and protection of everyone is paramount.

With outdated, inefficient, and low quality output per watt, which is all that matters when it comes to getting the most efficient lighting. The reasons behind this is because let’s say you have two different LEDs products, one outputs 135 lumens per watt while the other is at 120 lumens / watt. To power a light that outputs at 18,000 lumens; the 120 lumen per watt fixture will take 150 watts to reach 18,000 total lumens. While the 135 lumen per watt fixture will only require approximately 133 watts to generate same exact amount of light that the other higher watt fixture products.

See the important of lumens per watt? It’s everything, and we believe

Here’s another project of ours where we retrofitted an existing fixture in a parking lot (before and after):

The image list could go on, but the gist is this: LED has and will always improve your facility’s lot. Just look at the images yourself for the proof!

By choosing LED parking lot products for your facility, you are choosing higher quality along with higher efficiency products. LEDs (more specifically MyLEDLightingGuide’s) offer a better Color Rendering Index rating talked about before is about lumen depreciation. Metal halide and HPS experience greater and quicker depreciation in lumen output than any LED product does. So while a brand new and freshly installed metal halide fixture may look the same as an LED to start off its life; give it a few years and watch the difference. LED is almost guaranteed to be brighter for longer.

On the topic of saving money, how about the final benefit that will make you fall in love with LED technology and what it can do for your business.

While you need to be careful which LED products you purchase and from where you buy them from; commercial LEDs are just as open to rebates as any other.

Something called DesignLights Consortium (DLC for short) qualifies products and lists them on their site if they pass vigorous tests set by them. They offer two types of listing: commercial rebates but they also prove to be lesser of quality. Think; if a company offers quality lights what’s their reason not to get qualified? There isn’t, and that’s exactly our point.

Thankfully there are many DLC qualified products out their on the market, including ours. You can always take a look around just to say hi!

The jargon in the lighting world can often get mixed up. Color rending index (CRI) and color temperature are one of the most to be confused with each other. This post is going to clarify what the different between CRI and Color Temperature is so we can end this confusion.

Here is a short explanation why the CRI is more important to focus on before deciding for a color temperature. The color rendering index is the most important feature in certain applications as it determines the appearance of objects, faces and spaces. If this aspect is not relevant, the CRI can be as low as 60 or even 40.

The color rendering index (CRI) is a numeric evaluation of the light color accuracy with the reference of daylight (numbered 100). Sunlight and its broad spectrum will enable a person with normal vision to see 68 different colors in a color chart, but if the chart is illuminated by a light source of one wavelength only, each color from the color chart will appear as a different brightness of that one color. Some activities, such as walking or operating a vehicle, do not require the accurate perception of surface colors while others such as product selections in shops benefit from better color rendering features. Look at the application of the lighting installation. If the visual tasks are easy to perform the CRI doesn’t need to be high. In areas like offices, handcraft manufacturing and surgery, the requirements for visibility, contrast, visual guidance as well as face recognition need to be provided by a lighting system with a good CRI of >80 or even >90.

How much is the light color affecting the space? The term color temperature describes the temperature of objects by which they emit light, modeled through the “blackbody radiator”. When increasing the temperature of a “blackbody”, it starts to emit visible light in a continuous spectrum. The filament of a 60W incandescent lamp heats up to about 3000°F, as a result the lamp emits light with a color temperature of 3000K. Many of our artificial light sources do not create light by heating up a material until it glows like an incandescent lamps. Instead of creating a continuous spectrum, they generate an assortment of color emission lines. A blackbody color temperature cannot be directly given to this non-blackbody type of emission, generated by high intensity discharge and fluorescent lamps for example. For those light sources, a correlated color temperature (CCT) is indicated, based on the blackbody color temperature. A cool white fluorescent lamp has a CCT of about 5000K. The lamps light spectrum is different from a blackbody one but has the same temperature.

The light color influences the atmosphere in a space. The more cozy the ambiance the warmer the light color (lower color temperature) should be and the more dynamic the scene the cooler the light source (higher color temperature). The CRI is the most important factor to watch when choosing light sources. How good is the light source representing faces, colors and contrasts? The easier the visual task and perception the lower the CRI can be. The color temperature needs to be watched second, it is supporting the space’s atmosphere.

Conclusion

There you have it; an explanation of both the Color Rending Index and Color Temperature.

Have anymore questions or thoughts? Comment them down below!

The outdoor spaces on your property become the perfect spots to spend leisurely moments with your family and entertain friends. In fact, if these areas are planned and installed well, they become an extension of your home. Well-designed spaces allow you to use these areas comfortably during the daytime; however, the only way you would be able to use them optimally after dark, is if you get the right kind of outdoor lighting fixtures installed in your landscaping.

Many homeowners feel that installing a few floodlights in different spots on the property is sufficient in terms of outdoor lighting. However, this kind of illumination is never enough. In fact, there are times when floodlights can mar the beauty of your home and its immediate surroundings; they may end up highlighting some of the unflattering features of your property as well.

The one way to overcome this problem is to hire the services of expert outdoor lighting electricians to handle the job for you. They will understand what your specific requirements and preferences are and will survey the outdoor areas on your property. They will also identify which features you want to highlight and which you prefer to keep in the background. Once they have all this information, they will provide outdoor lighting options and quotes.

A good and knowledgeable electrician will always focus on providing low-maintenance, energy-efficient and cost-effective landscape lighting solutions. While outdoor lighting jobs are typically a part and parcel of landscaping jobs, many homeowners feel the need to upgrade their existing lighting installations to modern energy-efficient LED lights.

Since there are a number of technicalities and aspects that have to be taken into consideration while planning outdoor lighting, it’s important that you consult an expert outdoor electrician who will provide you all the information you need; this helps you make a more well-informed decision.

It’s also a good idea to opt for outdoor lighting maintenance plans. As part of these plans the electricians will come over to your property and inspect all the outdoor lighting installations and fixtures. They will check whether there is any wear & tear in the electrical wiring insulation, the grounding and all the fixtures too.

Regardless of how you look at it, the right kind of outdoor illumination provides a number of benefits. It enhances the security aspect of your property AND adds to its aesthetics. When you have a well-lit garden and yard, you are more encouraged to use these spaces and this increases your return on investment.

For more information, simply speak with the experts at AllRound Electrical and take their advice on various aspects of electrical installations in your home. The number to call is – 1300 169 263. You can also write to us at this email address.

Thanks for reading,1300 169 263