Electrical jobs should never be turned into a DIY project, unless you have formal training and experience in the field. While electricity is extremely useful and necessary, if it isn’t handled correctly, it can be pretty dangerous too. If you get a novice to handle the job for you that can result in overloaded circuits, poor wiring connections or even faulty grounding, which can be extremely dangerous to you and your family and result in a fire outbreak as well. Here are some common services for which you would need to call in an electrician:

The main electrical panels provide electricity to your entire house. If you have older panels with fuses and older wiring, those may not be able to bear the load of any new appliances you decide to install on your property. The latest electrical appliances tend to add heavy loads on the system and your older wiring installations won’t be able to support those loads. If you are getting new appliances, call in a licensed electrician to test and inspect the wiring and circuit breakers on your property.

If you need any new outlets installed or need existing ones converted to USB ports, you would have to call in an electrician for the job. Oftentimes, electrical codes necessitate that a minimum of 1 outlet in your kitchen and bathroom be a GFCI outlet. These are specifically designed to shut off the power in case there is an imbalance in electricity or if water comes in contact with any of the electrical equipment or fittings; this helps in preventing shock in these areas.

It’s important that there be certified and licensed electrician should handle. They will take all the necessary precautions while doing any kind of electrical work on your property.

Since the advent of the incandescent (and even before), quality of light has been on the tip of everyone’s tongue. Regrettably, that quality has mostly been unfortunate. When incandescent lights were the only choice, the early 20th century population complained about the glare and the possible dangers of electricity.

Case in point: on an episode of Downton Abbey (Masterpiece’s smash hit about an elite family living on an estate in the early 1900’s), the prim and hilarious Dowager Countess laments the new electric lamps:

“Such a glare! I couldn’t have electricity in the house – I wouldn’t sleep a wink. All those vapors seeping about. Feels as if  I were on stage at the Gaiety.”     

The little community of Victoria Park in central Florida is beating out Los Angeles when it comes to saving electricity on street lighting. Last November, I wrote a blog post about the street lighting program here in Los Angeles, which is currently yielding higher-than-expected energy savings — 60% compared to the expected 40%. Well, that’s something to crow about regardless of what they’re doing in Victoria Park.

The Nitty-Gritty in L.A.

Electricians are using LEDs to replace the conventional incandescent bulbs in 140,000 Los Angeles street lights. Maintenance costs for LEDs, though not as significant as electric bills, also take a smaller bite. Nothing to be sneezed at! LEDs are good for the City budget, good for climate change, and good for energy independence.

An LED (Light Emitting Diode) is a light created by the kind of tiny parts that are in a computer. LEDs are used, for example, in many kids’ light sabers. They’re brighter and use a lot less electricity than the incandescents that you and I screwed into sockets when we grew up. As for what Victoria Park is up to….

Electricians Retrofit Gas Lights in Victoria Park, Florida

Victoria Park is now upping the ante. Electricians are retrofitting its gas-burning street lights with special LEDs that will save the community 92% on its combined energy and maintenance bills.

Victoria Park is a planned community in central Florida. Residents enjoy the charm of real gas-lit street lights, but the expense is a concern. As the community builds out, the annual costs for gas and maintenance were being projected to top $1,000,000 a year, just for street lighting.

When residents formed a committee to look into alternatives, the committee hit upon low-voltage LEDs. While typical house current runs at 110 volts, low-voltage current can run at around 24 volts, reducing power needs.

Victoria Park is now retrofitting their existing street lights with low-voltage LEDs. The retrofits, an innovation by Solas Ray™ Lighting in Anderson Indiana, look, for all the world, like real gas lights. They mimic the look of a candle flame. The lights create charm and a warm glow, but also five times more light than each pole would create with gas. Not to mention the 92% energy and maintenance savings. In fact, the Mayor of the City of DeLand, where Victoria Park is located, awarded Solas Ray a proclamation of appreciation for saving Victoria Park residents nearly half a million dollars in 2010.

Fortunately for all of us, in the energy efficiency race, we all win as cities out-do each other to help out their budgets and help the environment.

Want to save energy in your home or business?

One of the specialties of my electrical contracting company, The Electric Connection, is energy-efficient lighting. Call us to discuss your lighting needs (800) 990-9490.

Kim Hopkins

CEO, The Electric Connection.

Visit our company profile.